Használati útmutató Metra 99-6516B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra 99-6516B (8 oldal) a Autós készlet kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
APPLICATIONS
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
REV. 3/4/2014 INST99-6516B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 99-6516B
A) Radio housing trim panel • B) Radio housing • C) ISO Brackets • D) ISO Trim plate E) Double DIN brackets
• F) Double DIN trim plateG) Pocket • H) (7) metal panel clips • I) (8) #6 Phillips screws
KIT COMPONENTS
• DIN radio provision with pocket
• ISO radio provision with pocket
• Double DIN radio provision
Painted matte black
KIT FEATURES
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-6502-NAV - Chrysler CAN R.A.P. interface 2004-up
• CHTO-01 - Chrysler CAN amp interface 2004-up
Antenna Adapter: • 40-CR10 - Chrysler antenna adapter 2004-up
• Flat blade screwdriver • Panel removal tool
• Phillips screwdriver Socket wrench • Cutting tool
TOOLS REQUIRED
A B C
G
D
H I
E F
Dash Disassembly
Chrysler 300 2005-2007 ...................................... 2
Kit Assembly
DIN radio provision with pocket ............................ 2
ISO radio provision with pocket ............................ 3
Double DIN radio provision ................................... 3
Table of Contents
99-6516B
1. Unclip and remove entire panel
surrounding radio and climate
controls, including A/C vents and
clock. (Figure A)
2. Remove (4) 7mm screws securing
radio to dash and remove radio.
(Figure B)
3. Remove factory vents, clock,
switch plate, and climate controls
from the factory radio panel and
transfer to the 99-6516B radio
panel using the screws provided in
this package.
Continue to kit assembly
Dash Disassembly Kit Assembly
(Figure A)
(Figure B)
DIN radio provision with pocket
1. Slide the DIN cage into the radio
housing and secure by bending
the metal locking tabs down.
(Figure A)
2. Slide the aftermarket radio into the
cage until secure. (Figure B)
3. Snap the pocket into the radio
housing. (Figure C)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
5. Reassemble dash in reverse order
of disassembly, using the new
Metra radio housing trim panel.
(Figure A)
(Figure C)
(Figure B)
99-6516B
Kit Assembly
ISO radio provision with pocket
1. Mount the ISO Brackets to the
radio with the screws supplied
with the unit. (Figure A)
2. Slide the radio into the radio
opening until the side clips engage.
(Figure B)
3. Snap the ISO Trim Plate into the
radio housing. (Figure C)
4. Snap the pocket into the radio
housing. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly, using the new
Metra radio housing trim panel.
(Figure A)
(Figure C)
(Figure B)
right side clip
Double DIN radio provision
1. Cut and remove center divider in
radio housing. (Figure A)
2. Snap the double DIN brackets
to the inside edge of the radio
housing. (Figure B)
3. Slide the double DIN radio unit
into the double DIN bracket/radio
housing assembly and secure
the radio unit to the kit using the
screws supplied with the radio
unit. (Figure C)
4. Snap the double DIN trim-plate
onto the housing/radio assembly.
(Figure D)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly, using the new
Metra radio housing trim panel.
(Figure A)
(Figure B)
(Figure C)
(Figure D)

Termékspecifikációk

Márka: Metra
Kategória: Autós készlet
Modell: 99-6516B

Szüksége van segítségre?

Ha segítségre van szüksége Metra 99-6516B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Autós készlet Metra

Metra

Metra 99-7367HG Útmutató

4 Szeptember 2024
Metra

Metra 99-8223 Útmutató

4 Szeptember 2024
Metra

Metra 99-7422 Útmutató

4 Szeptember 2024
Metra

Metra 99-7875 Útmutató

4 Szeptember 2024
Metra

Metra 99-3302 Útmutató

4 Szeptember 2024
Metra

Metra 99-5802 Útmutató

3 Szeptember 2024
Metra

Metra 99-7874 Útmutató

3 Szeptember 2024
Metra

Metra 99-5832G Útmutató

3 Szeptember 2024
Metra

Metra 99-9011 Útmutató

3 Szeptember 2024
Metra

Metra 99-6000 Útmutató

3 Szeptember 2024

Útmutatók Autós készlet

Legújabb útmutatók Autós készlet

Livoo

Livoo TEC602 Útmutató

2 Október 2024
Parrot

Parrot Minikit Chic Útmutató

29 Szeptember 2024
Nedis

Nedis DTCTCO20WT Útmutató

22 Szeptember 2024
Bury

Bury UNI Útmutató

21 Szeptember 2024
Caliber

Caliber HFB 200 Útmutató

19 Szeptember 2024
Bury

Bury Easytouch Pro Útmutató

18 Szeptember 2024
Alpine

Alpine HCE-C157D Útmutató

18 Szeptember 2024
Nokia

Nokia HF-210 Útmutató

17 Szeptember 2024