Használati útmutató Metra 99-5715LDS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra 99-5715LDS (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
INSTALLATION INSTRUCTIONS FOR PART 99-5715LDS
99-5715LDS
APPLICATIONS
FORD Taurus
MERCURY Sable
1996-1999
KIT FEATURES
• DIN Radio Provision
A) Integrated Mounting Kit B) 70-5715 Extension Harness C) 70-5716 Harness
KIT COMPONENTS
A
TOOLS REQUIRED:
Torx Driver 86-5618 Head Unit Removal Keys Dremel Tool
1-800-221-0932
© COPYRIGHT 2007 METRA ELECTRONICS CORPORATION
www.metraonline.com
N
OTE: Metra’s 70-5716 must be used with 1998-1999 models.
B
C
Dash Disassembly
-
FORD Taurus 1996-1999...............................
1
-
MERCURY Sable 1996-1999............................
1
Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 2. . . . . . . . . . . .
Kit Assembly
- DIN Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,4
- Defroster/Power Plug Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Final Assembly. 6...........................................
TABLE OF CONTENTS
99-5715LDS
*Note:
Refer also to the instructions included with the aftermarket radio.
99-5715LDS DASH DISASSEMBLY
AND KIT PREPARATION
FORD Taurus and Mercury Sable 1996-1999
"A"
"B"
"C"
"D"
"E"
A
Fig. A
Fig. B
F
1
Disconnect the negative battery termi-
nal to prevent an accidental short cir-
cuit.
1
Turn the factory climate control dials into a vertical position and pull the dials off.
(see Fig. A). Remove (2) hex-head screws securing the outer climate control switches
and remove the switches. Unclip the center climate control switch and remove the
switch. (see Fig. B). kMount the switches to the bac of the Integrated Mounting Kit
using the same hex-head screws. (see Fig. C). Holding the climate control dials in a
vertical position, insert the dials onto the posts of the mounted switches and secure.
(see Fig. D)
3
Using Metra's 86-5618, pull the factory
radio/climate control panel from the
dash. Disconnect the audio system
connectors ("A"), blower motor switch
connector ("B"), vacuum hose harness
("C"), a/c damper door switch connec-
tor ("D"), and potentiometer connector
("E"). Remove the panel.
(Figure A)
2
Continue kit preparation on next page.

Termékspecifikációk

Márka: Metra
Kategória: nincs kategorizálva
Modell: 99-5715LDS

Szüksége van segítségre?

Ha segítségre van szüksége Metra 99-5715LDS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Metra

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva