Használati útmutató Metra 99-5025

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra 99-5025 (4 oldal) a Autós készlet kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 7/11/17 INST99-5025
I N S TA L L A T I O N I N S T R U C T I O N S
99-5025
KIT FEATURES
ISO DIN radio provision with pocket
KIT COMPONENTS
• A) Radio brackets • B Trim plate • C) (4) #8 x 1” Philips screws •D) Pocket • E) (4) #8 x 3/8” Phillips screws TOOLS REQUIRED
• Phillips screwdriver
• Radio removal tools 86-5618
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-1770 • 70-1768 (amplified models)
Antenna Adapter: Not required
A B C D
Ford Mustang 1987-1993
E
1.800.221.0932
|
MetraOnline.com
2
1. Using Metra’s 86-5618, pull the factory
radio from the dash and disconnect the
wiring. (Figure A)
2. Remove (2) 7/16” hex bolts from inside
the dash cavity and remove the radio
subdash bracket. (Figure B)
Note:
The threaded studs from under this
bracket will also need to be removed for
the aftermarket radio to clear
.
Continue to Kit Assembly
ALSO REMOVE (2) THREADED STUDS FROM UNDER BRACKET
7/16” (2)
HEX BOLTS
RADIO SUB-DASH BRACKET
(Figure B)(Figure A)
DASH DISASSEMBLY
REV. 7/11/2017 INST99-5025 3
(Figure A) (Figure B)
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Secure the
radio brackets
to the radio
using the screws supplied with the
radio. (Figure A)
2. Secure the
pocket
to the radio assembly
using the (4) #8 x 3/8” Phillips screws
provided. (Figure A)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra. Test
the radio for proper operation.
4. Secure the
trim plate
to the completed
assembly, and also to the vehicle, using
the (4) #8 x 1” Phillips screws provided.
(Figure B)

Termékspecifikációk

Márka: Metra
Kategória: Autós készlet
Modell: 99-5025

Szüksége van segítségre?

Ha segítségre van szüksége Metra 99-5025, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Autós készlet Metra

Metra

Metra 99-8270HG Útmutató

3 Április 2025
Metra

Metra 99-8722B Útmutató

3 Április 2025
Metra

Metra 99-7802CH Útmutató

3 Április 2025
Metra

Metra 99-8214TG Útmutató

3 Április 2025
Metra

Metra 99-4000 Útmutató

1 Április 2025
Metra

Metra 95-7883HG Útmutató

29 December 2024
Metra

Metra AX-ADCT4 Útmutató

29 December 2024
Metra

Metra 99-7345B Útmutató

29 December 2024
Metra

Metra 99-7339B Útmutató

29 December 2024
Metra

Metra OESWC-7552H Útmutató

29 December 2024

Útmutatók Autós készlet

Legújabb útmutatók Autós készlet

ZZ-2

ZZ-2 IC-SYM Útmutató

2 Április 2025
Nokia

Nokia HF-33W Útmutató

16 Január 2025
Renegade

Renegade REN10KIT Útmutató

31 December 2025
Scosche

Scosche HA1714B Útmutató

29 December 2024
HTC

HTC Car Kit Útmutató

16 December 2024
Livoo

Livoo TEC602 Útmutató

2 Október 2024
Parrot

Parrot Minikit Chic Útmutató

29 Szeptember 2024
Nedis

Nedis DTCTCO20WT Útmutató

22 Szeptember 2024
Bury

Bury UNI Útmutató

21 Szeptember 2024