Használati útmutató Metra 95-8735B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra 95-8735B (4 oldal) a Autós készlet kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 10/21/20 INST95-8735B
I N S TA L L AT I O N I N S T R U C T I O N S
95-8735B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
ISO DDIN radio provision
Painted scratch resistant matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) (8) Flat-head ISO radio screws • D) (4) #8 x 3/8” Phillips screws TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 3mm Allen screwdriver • T-20 Torx screwdriver
• Cutting tool (03-04 models) • File (03-04 models)
TABLE OF CONTENTS
Dash Disassembly
-2003-2004 .............................................................2
-2005-2008.............................................................3
Kit Assembly ..........................................................4
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness:
See metraonline.com for
wiring harness options
Antenna Adapter: 40-EU10 (05-08) • 40-VW12 (03-04)
Steering Wheel Control Interface: • ASWC-1
A B D
Mercedes SL Class 2003-2008
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
C
2386.257.1187
|
MetraOnline.com
Attention! The factory radio must have the
AM source selected before being removed
from the vehicle.
Attention! A permanent modification to the
center console trim bezel will be required.
The factory radio will no longer be able to be
reinstalled after this modification.
1. Unclip and remove the left and right
side panels from the center console.
Remove (3) T-20 Torx screws from each
side. (Figures A & B)
2. Engage the parking brake then place
the gear selector in neutral. Pull up on
the gear selector boot just enough to
allow the center console trim bezel to be
removed. (Figure C)
3. Open the center console, then starting
from the back, unclip and release the
entire center console trim bezel which
also wraps around the radio. Lift up just
enough to access the connectors from
underneath. Unplug all connectors, then
remove the trim bezel. (Figure D)
4. Remove (2) T-20 Torx screws securing
the cup holders, then slide the cup
holders out and remove them. (Figure E)
5. Remove (4) T-20 Torx screws securing
the radio. Slide the radio out, then
unplug and remove the radio.
6. Dash Modification: Cut the center
console trim bezel to the left and right
side of the bottom of the radio opening,
slightly above the cup holders. These
cuts will have to be perfect as they
will be visible. Cut the trim bezel just
enough to allow room for the kit. It may
be best to leave a little extra, then file
the rest. (Figure F)
Continue to Kit Assembly
DASH DISASSEMBLY (2003-2004)
(Figure A) (Figure D)
(Figure B) (Figure E)
(Figure C) (Figure F)
REV. 10/21/2020 INST95-8735B 3
Attention! The factory radio must have the
AM source selected before being removed
from the vehicle.
1. Unclip and remove the left and right
side panels from the center console.
Remove (3) T-20 Torx screws from each
side. (Figures A & B)
2. Open both cup holders, then unsnap the
trim covers from each cup holder. Push
the cup holders back in, without their
covers. (Figure C)
3.
Engage the parking brake then place the
gear selector in neutral. Pull up on the gear
selector boot just enough to allow the center
console trim bezel to be removed. (Figure D)
4. Open the center console, then starting
from the back, unclip and release the
center console trim bezel just enough to
access the connectors from underneath.
Unplug all connectors, then remove the
trim bezel. (Figure E)
Note: The trim bezel can also be rotated
90-degrees and left connected.
5. Remove (2) T-20 Torx screws securing
the cup holders, then slide the cup
holders out and remove them. (Figure F)
6. Press in on the (2) plastic clips below the
radio to release the radio. Slide the radio
out, then unplug and remove the radio.
(Figure G)
Note: There are (2) metal tabs on top
of the radio. After the radio has been
released, the radio should drop down
enough for these tabs to clear the dash.
Continue to Kit Assembly
DASH DISASSEMBLY (2005-2008)
(Figure A)
(Figure B)
(Figure C)
(Figure D)
(Figure E)
(Figure F)
(Figure G)

Termékspecifikációk

Márka: Metra
Kategória: Autós készlet
Modell: 95-8735B

Szüksége van segítségre?

Ha segítségre van szüksége Metra 95-8735B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Autós készlet Metra

Metra

Metra 99-7367HG Útmutató

4 Szeptember 2024
Metra

Metra 99-8223 Útmutató

4 Szeptember 2024
Metra

Metra 99-7422 Útmutató

4 Szeptember 2024
Metra

Metra 99-7875 Útmutató

4 Szeptember 2024
Metra

Metra 99-3302 Útmutató

4 Szeptember 2024
Metra

Metra 99-5802 Útmutató

3 Szeptember 2024
Metra

Metra 99-7874 Útmutató

3 Szeptember 2024
Metra

Metra 99-5832G Útmutató

3 Szeptember 2024
Metra

Metra 99-9011 Útmutató

3 Szeptember 2024
Metra

Metra 99-6000 Útmutató

3 Szeptember 2024

Útmutatók Autós készlet

Legújabb útmutatók Autós készlet

Livoo

Livoo TEC602 Útmutató

2 Október 2024
Parrot

Parrot Minikit Chic Útmutató

29 Szeptember 2024
Nedis

Nedis DTCTCO20WT Útmutató

22 Szeptember 2024
Bury

Bury UNI Útmutató

21 Szeptember 2024
Caliber

Caliber HFB 200 Útmutató

19 Szeptember 2024
Bury

Bury Easytouch Pro Útmutató

18 Szeptember 2024
Alpine

Alpine HCE-C157D Útmutató

18 Szeptember 2024
Nokia

Nokia HF-210 Útmutató

17 Szeptember 2024