Használati útmutató Metra 95-6551

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra 95-6551 (4 oldal) a Autós készlet kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 1/30/19 INST95-6551
I N S TA L L AT I O N I N S T R U C T I O N S
95-6551
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
ISO DDIN radio provision
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Cut template
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 3/8” Socket wrench • Cutting tool • Scribe tool
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation ....................................................2-3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-1817
Antenna Adapter: Not required
A B C
Dodge Ram 1998-2001
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
1.800.221.0932
|
MetraOnline.com
2
1. Open the power outlet cover and
remove (1) Phillips screw. (Figure A)
No screw present for year 2000 Note:
models.
2. Unclip, unplug and remove the
dashboard trim panel. (Figure A)
3. Remove (2) 3/8” hex-head screws
securing the radio to the dash. Slide the
radio out, then unplug and remove
Continue to Kit Preparation
(Figure B)
(Figure A) (Figure A)
DASH DISASSEMBLY KIT PREPARATION
1. Place the cut template over the
dashboard trim panel. (Figure A)
2. Using a scribe tool, score the area in the
radio section to be cut. (Figure B)
3. Remove the cut template, then cut the
scored area with a cutting tool.
Continued on the next page
Remove shaded area
REV. 1/30/2019 INST95-6551 3
(Figure D)
(Figure C)
KIT PREPARATION (CONT.)
(Figure A)
4. Clip the l onto the radio trim pane
dashboard trim panel. (Figure C)
5. Cut the sub-dash to allow room for the
radio assembly. (Figure D)
Continue to Kit Assembly
1. Secure the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Secure the radio assembly to the dash
using the factory screws.
4. Reassemble the dash in reverse
order of disassembly to complete the
installation.
KIT ASSEMBLY
Remove shaded area

Termékspecifikációk

Márka: Metra
Kategória: Autós készlet
Modell: 95-6551

Szüksége van segítségre?

Ha segítségre van szüksége Metra 95-6551, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Autós készlet Metra

Metra

Metra 99-7367HG Útmutató

4 Szeptember 2024
Metra

Metra 99-8223 Útmutató

4 Szeptember 2024
Metra

Metra 99-7422 Útmutató

4 Szeptember 2024
Metra

Metra 99-7875 Útmutató

4 Szeptember 2024
Metra

Metra 99-3302 Útmutató

4 Szeptember 2024
Metra

Metra 99-5802 Útmutató

3 Szeptember 2024
Metra

Metra 99-7874 Útmutató

3 Szeptember 2024
Metra

Metra 99-5832G Útmutató

3 Szeptember 2024
Metra

Metra 99-9011 Útmutató

3 Szeptember 2024
Metra

Metra 99-6000 Útmutató

3 Szeptember 2024

Útmutatók Autós készlet

Legújabb útmutatók Autós készlet

Livoo

Livoo TEC602 Útmutató

2 Október 2024
Parrot

Parrot Minikit Chic Útmutató

29 Szeptember 2024
Nedis

Nedis DTCTCO20WT Útmutató

22 Szeptember 2024
Bury

Bury UNI Útmutató

21 Szeptember 2024
Caliber

Caliber HFB 200 Útmutató

19 Szeptember 2024
Bury

Bury Easytouch Pro Útmutató

18 Szeptember 2024
Alpine

Alpine HCE-C157D Útmutató

18 Szeptember 2024
Nokia

Nokia HF-210 Útmutató

17 Szeptember 2024