Használati útmutató Metra 95-3019B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra 95-3019B (8 oldal) a Autós készlet kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
REV. 3/31/2017 INST95-3019B
INSTALLATION INSTRUCTIONS FOR PART 95-3019B
METRAThe World’s best kits.®metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
• ISO DDIN radio provision
Painted matte black
A) Radio trim panel • B) Radio housing • C) Radio brackets • D) (6) #8 x 3/8” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com for specific interface options Antenna Adapter: 40-EU55
• Panel removal tool • Phillips screwdriver
• 9/32” socket wrench Cutting tool
TOOLS REQUIRED
(excluding Malibu limited) Table of Contents
A B C D
Dash Disassembly ................................................. 2
Kit Assembly
ISO DDIN radio provision 3 ......................................
95-3019B
Dash Disassembly
1. Unclip and remove the small trim
panel above the factory radio
display, and then remove (2) 9/32”
screws exposed. (Figure A)
2. Unclip and remove the trim panel
below the climate controls that
extend across the dash, and above
the glove box. (Figure B)
3. Unclip and remove the
climate controls. (Figure C)
4. Inside a small cavity located
behind the climate controls,
remove (2) 9/32” screws facing
up that are securing the radio
assembly. (Figure D)
5. Unclip and remove the radio
assembly. (Figure E)
6. Cut and remove the shaded
area from the sub-dash to allow
clearance for the aftermarket radio.
(Figure F)
Continue to Kit Assembly
INSIDE RADIO CAVIT Y
(Figure A) (Figure B) (Figure C)
(Figure D) (Figure E) (Figure F)
95-3019B
Kit Assembly
ISO DDIN radio provision
1. Secure the to the radio brackets
radio using the screws supplied
with the radio. (Figure A)
2. Slide the radio/bracket/assembly in
between the and radio trim panel
the and secure with radio housing
the (6) #8 x 3/8” Phillips screws
provided. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for proper
operation.
4. Reassemble the dash in reverse
order of disassembly.
(Figure A)
(Figure B)

Termékspecifikációk

Márka: Metra
Kategória: Autós készlet
Modell: 95-3019B

Szüksége van segítségre?

Ha segítségre van szüksége Metra 95-3019B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Autós készlet Metra

Metra

Metra 99-8270HG Útmutató

3 Április 2025
Metra

Metra 99-8722B Útmutató

3 Április 2025
Metra

Metra 99-7802CH Útmutató

3 Április 2025
Metra

Metra 99-8214TG Útmutató

3 Április 2025
Metra

Metra 99-4000 Útmutató

1 Április 2025
Metra

Metra 95-7883HG Útmutató

29 December 2024
Metra

Metra AX-ADCT4 Útmutató

29 December 2024
Metra

Metra 99-7345B Útmutató

29 December 2024
Metra

Metra 99-7339B Útmutató

29 December 2024
Metra

Metra OESWC-7552H Útmutató

29 December 2024

Útmutatók Autós készlet

Legújabb útmutatók Autós készlet

ZZ-2

ZZ-2 IC-SYM Útmutató

2 Április 2025
Nokia

Nokia HF-33W Útmutató

16 Január 2025
Renegade

Renegade REN10KIT Útmutató

31 December 2025
Scosche

Scosche HA1714B Útmutató

29 December 2024
HTC

HTC Car Kit Útmutató

16 December 2024
Livoo

Livoo TEC602 Útmutató

2 Október 2024
Parrot

Parrot Minikit Chic Útmutató

29 Szeptember 2024
Nedis

Nedis DTCTCO20WT Útmutató

22 Szeptember 2024
Bury

Bury UNI Útmutató

21 Szeptember 2024