Használati útmutató Metra 70-6512

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra 70-6512 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/3
Match wires below to the matching function of each wire on your receiver (refer to instructions supplied with receiver). The wire colors of your
new receiver may, or may not, match the wire colors of the adaptor. Match adaptor and receiver wires by function, disregarding color.
Your receiver illumination wire could be Orange or Orange/White. As with other wires, match this wire to the illumination wire in this harness
by function, not by color. If your receiver does not have an illumination wire, tape off the illumination wire.
Individually tape off any unused wires.
Make speaker wiring connections following instructions on the next page.
Make final wiring connections following instructions on page 3.
Receiver Wiring Adaptor &
Amplifier Bypass Wiring Harnesses
120 70-6512
Revision 08/23/17
STEP 1 -- CONNECT WIRES
*120706512*
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
Copyright 2017 Crutchfield Corporation
A.
B.
C.
D.
E.
Yellow - 12 Volts Constant Power
Black - Chassis Ground
Power Harness
Red - 12 Volts Accessory Power
Orange - Illumination
Receiver Wiring Adaptor &
Amplifier Bypass Wiring Harnesses
120 70-6512
Page 2
STEP 1 -- CONNECT WIRES
STEP 2 -- INSTALL
Route harnesses from receiver to amplifier located behind the glove
box. Disconnect harnesses from amplifier. Plug the bypass harness
into the matching output harness from the amplifier.
White - Left Front Speaker Positive
Violet/Black - Right Rear Speaker Negative
Violet - Right Rear Speaker Positive
Green - Left Rear Speaker Positive
Gray - Right Front Speaker Positive
Gray/Black - Right Front Speaker Negative
Green/Black - Left Rear Speaker Negative
White/Black - Left Front Speaker Negative
Yellow/Blue - Left Dash Speaker Positive
Yellow/Red - Right Dash Speaker Positive
Yellow/Black - Left Dash Speaker Negative
Yellow/Orange - Right Dash Speaker Negative
Make final wiring connections following instructions on page 3.
Copyright 2017 Crutchfield Corporation
(continued)
Wiring Connections
120 70-6512
Tools Required
C. Solder:
Heat wire.
Touch solder to wire,
not to iron.
CRIMP METHOD SOLDER METHOD
Tools Required
Crimp Tool/
Wire Stripper
Crimp Caps
A. Strip wires back 1/2”.
B. Twist wires together and
insert in crimp cap.
C. Squeeze middle of cap
for tight connection.
A. Strip wires back 1/2”.
B. Twist wires together.
D. Tape
Soldering Iron Rosin Core
Solder
Electrical Tape
Copyright 2017 Crutchfield Corporation
Page 3

Termékspecifikációk

Márka: Metra
Kategória: nincs kategorizálva
Modell: 70-6512

Szüksége van segítségre?

Ha segítségre van szüksége Metra 70-6512, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Metra

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025