Használati útmutató Martin Logan Motion SLM

Martin Logan hangszóró Motion SLM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Martin Logan Motion SLM (20 oldal) a hangszóró kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/20

u s e r ’ s m a n u a l

The lightning bolt flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert the user to the pres-

ence of potentially “dangerous voltage” within the

product’s enclosure that may be sufficient to consti-

tute a risk of electric shock.

In accordance with the European Union WEEE

(Waste Electrical and Electronic Equipment)

directive effective August 13, 2005, we

would like to notify you that this product may contain

regulated materials which upon disposal, according to

the WEEE directive, require special reuse and recycling

processing. For this reason Martin Logan has arranged

with our distributors in European Union member nations to

collect and recycle this product at no cost to you.

To find your local distributor please contact the dealer

from whom you purchased this product, email info@

martinlogan.com or visit the distributor locator at www.

martinlogan.com.

Please note, only this product itself falls under the WEEE

directive. When disposing of packaging and other

related shipping materials we encourage you to recycle

these items through the normal channels.

The exclamation point within an equi-

lateral triangle is intended to alert the

user to the presence of important oper-

ating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING!

• Refer servicing to a qualified

technician.

• To prevent fire or shock hazard,

do not expose this module to moisture.

• Turn amplifier off should any abnormal

conditions occur.

• Do not drive speaker beyond its rated power.

• To prevent injury, this apparatus must be

securely attached to the wall in accor-

dance with the installation instructions.

Connection .                            4

Installation.                             4

Break In . . . . . . . . . . . . . . . . . . . . . . . . . .4

Installing On A Wall . . . . . . . . . . . . . . . . . .4

Installing the Horizontal Stand . . . . . . . . . . .5

Installing the Vertical Stand . . . . . . . . . . . . .5

Removing the Logo Badge . . . . . . . . . . . . . .6

Frequently.Asked.Questions.               6

Troubleshooting .                        6

Contacting.Customer.Service .             7

General.Information.                     7

Warranty Information . . . . . . . . . . . . . . . . . 7

Serial Number . . . . . . . . . . . . . . . . . . . . . .7

Service . . . . . . . . . . . . . . . . . . . . . . . . . .7

Specifications .                          8

Dimensional.Drawings.                  9

With Vertical Stand . . . . . . . . . . . . . . . . . . 9

With Horizontal Stand . . . . . . . . . . . . . . . . 9

With Wall Bracket . . . . . . . . . . . . . . . . . .10

Serial Number:_____________________________

Record your serial number here for easy reference.

You will need this information when filling out your

warranty registration. The serial number is located

near the binding posts and on the product carton.

x1 x4

Note:.This speaker is not magnetically shielded

and therefore should not be placed directly beside

or atop a CRT television.

BREAK IN

Allow approximately 72 hours of break-in at 90

dB (moderate listening levels) before any critical

listening.

INSTALLING ON A WALL

Note: This speaker is mountable in either a hori-

zontal or vertical orientation.

Note: These instructions assume the mounting

surface is standard wood frame and sheet rock

construction. If you wish to mount to another type

of surface, consult a bonded contractor.

Required.tools.(not.included):

• Ruler

• Level

• Electric drill and 1/4” and 1/8” drill bits

• Phillips screwdriver

Required.hardware.(included):

• (1) Installation template

• (1) Wall bracket

• (2) 1.5-inch Phillips screws

• (2) Sheet rock anchors

• (4) 10mm circular pads

1 Locate mounting location using a level and the

installation template.

2 Mark the pilot hole locations.

3 Drill the pilot holes using a 1/8-inch drill bit. If

a pilot hole DOES NOT hit a stud, widen that

pilot hole using a 1/4-inch drill bit and install

a wall anchor at that location (fig. 3).

ConneCtion

WARNING! Turn your amplifier

off before making or breaking any

signal connections!

These speakers are designed with easy-to-use push-

style binding posts that accept bare wire or pins

(fig. 2). Assign the same color to the (+) and (–) ter-

minals on both the speaker and the amplifier. Make

certain that all connections are tight.

Fig. 3

installation

WARNING! Installation other

than that described in the body of

this document requires specific

documentation from MartinLogan.

Fig. 2

4 Using the 1.5-inch Phillips screws, mount the

wall bracket(s) as shown (fig. 3).

5 Attach the 4 pads to the back of the speaker (fig 3).

6 Hang the speaker, guiding the wall mount bolts

into the keyholes.

INSTALLING THE HORIZONTAL STANDS

Required.tools.(not.included):

• Phillips screwdriver

Required.hardware.(included):

• (2) #8 - 3/4-inch Phillips screws

• (2) Horizontal stands

1 Using a Phillips screwdriver and a #8 x 3/4-

inch screw, attach both horizontal stands to the

back of the speaker (fig. 4).

2 Turn the bolts in the horizontal stands to level

the speaker or to adjust the angle (fig 4).

INSTALLING THE VERTICAL STAND

Required.tools.(not.included):

• Phillips screwdriver

Required.hardware.(included):

• (2) #8 - 3/4-inch Phillips screws

• (1) Vertical stand

Fig. 3 Fig. 4

Fig. 5

How do I clean my speakers?

Use a dust free cloth (such as a micro fiber cloth)

or a soft brush to remove dust from your speakers..

Do.not.spray.any.kind.of.cleaning.agent.on.or.in.

close.proximity.to.the.drivers

Could you suggest a list of suitable elec-

tronics and cables ideal for MartinLogan

speakers?

We have no favorites and use electronics and

cables quite interchangeably. We would suggest

listening to a number of brands—and above all

else—trust your ears. Dealers are always the best

source for information when purchasing additional

audio equipment.

Is there likely to be any interaction

between my speakers and the televi-

sion in my A/V system?

Yes. These speakers are not shielded and should

be kept at least 2 feet away from a CRT television.

Will exposure to sunlight affect the life

or performance of my speakers?

We recommend against placing any loudspeaker

in direct sunlight. Ultraviolet (UV) rays from the sun

can cause deterioration of cabinet, speaker cones,

etc. Small exposures to UV will not cause a prob-

lem. Filtering of UV rays through glass will greatly

reduce the negative effects.

F a qrequently sked uestions

No Output

• Check that all system components are turned

on and source material is playing.

• Check speaker wires and connections.

• Check all interconnecting cables.

• If you are unable to resolve your problem,

please contact your dealer or MartinLogan cus-

tomer service (see below).

troubleshooting

1 Using a Phillips screwdriver and two #8 x

3/4-inch screws, attach the vertical stand to

the back of the speaker (fig. 5).

MOVING THE LOGO BADGE

The logo badge is attached magnetically. Using

your fingers, pull it away from the grille cover and

reattach it at the desired position.

Termékspecifikációk

Márka:	Martin Logan
Kategória:	hangszóró
Modell:	Motion SLM

Szüksége van segítségre?

Ha segítségre van szüksége Martin Logan Motion SLM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók hangszóró Martin Logan

Martin Logan ElectroMotion IW Útmutató

29 December 2024

Martin Logan Motion C10 Útmutató

30 Augusztus 2024

Martin Logan Motion Foundation F1 Útmutató

30 Augusztus 2024

Martin Logan Motion Foundation F2 Útmutató

30 Augusztus 2024

Martin Logan Motion Foundation B1 Útmutató

30 Augusztus 2024

Martin Logan Foundation B2 Útmutató

30 Augusztus 2024

Martin Logan Motion B10 Útmutató

30 Augusztus 2024

Martin Logan Motion F10 Útmutató

30 Augusztus 2024

Martin Logan Motion Foundation B2 Útmutató

30 Augusztus 2024

Martin Logan Dynamo IW-S Útmutató

19 Augusztus 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025

Turbosound PQ12-SB Útmutató

3 Április 2025

Trust Tytan GXT 658 Útmutató

3 Április 2025

Turbosound PQ15-YB Útmutató

3 Április 2025

Klipsch Synergy KSB-S1 Útmutató

3 Április 2025

Klipsch Synergy KSF-10.5 Útmutató

3 Április 2025

Klipsch kO-R1 Útmutató

3 Április 2025

Klipsch Synergy SB-1 Útmutató

3 Április 2025

Klipsch Reference RB-5 II Útmutató

3 Április 2025

Klipsch Contractor CS-800-R Útmutató

3 Április 2025