Használati útmutató Makita HR2475
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Makita HR2475 (28 oldal) a fúrógép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/28
1
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
DOUBLE INSULATION
DOUBLE ISOLATION
DOBLE AISLAMIENTO
Combination Hammer
Marteau combiné
Martillo combinado
HR2475
010154
2
ENGLISH
SPECIFICATIONS
Model HR2475
Concrete 25 mm (1")
Core bit 54 mm (2-1/8")
Steel 13 mm (1/2")
Capacities
Wood 32 mm (1-1/4")
No load speed (RPM) 0 - 1,100/min.
Blows per minute 0 - 4,500
Overall length 429 mm (16-7/8")
Net weight 3.0 kg ( 6.6 lbs)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
GEA008-1
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal Safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. . Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
14. Do not overreach. Keep proper footing and
balance at all times. This enables better control
3
of the power tool in unexpected situations.
15. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
16. If devices are provided for the connection of
dust extraction and collection facilities,
ensure these are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
Power tool use and care
17. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
18. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
19. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
20. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
21. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
22. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
SERVICE
24. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
25. Follow instruction for lubricating and
changing accessories.
26. Keep handles dry, clean and free from oil and
grease.
USE PROPER EXTENSION CORD. Make sure your
extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to
carry the current your product will draw. An undersized
cord will cause a drop in line voltage resulting in loss of
power and overheating. Table 1 shows the correct size
to use depending on cord length and nameplate ampere
rating. If in doubt, use the next heavier gage. The
smaller the gage number, the heavier the cord.
Table 1: Minimum gage for cord
Ampere Rating Volts Total length of cord in feet
120 V 25 ft. 50 ft. 100 ft. 150 ft.
More Than Not More Than AWG
0 6 18 16 16 14
18 16 14 126 10
10 12 16 16 14 12
12 16 14 12 Not Recommended
000173
GEB007-6
ROTARY HAMMER SAFETY
WARNINGS
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. If you use this
tool unsafely or incorrectly, you can suffer serious
personal injury.
1. Wear ear protectors. Exposure to noise can
cause hearing loss.
2. Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
3. Hold power tool by insulated gripping
surfaces, when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord. Cutting accessory
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
Termékspecifikációk
| Márka: | Makita |
| Kategória: | fúrógép |
| Modell: | HR2475 |
Szüksége van segítségre?
Ha segítségre van szüksége Makita HR2475, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók fúrógép Makita
1 Április 2025
28 Március 2025
28 Március 2025
28 Március 2025
28 Március 2025
28 Március 2025
27 Március 2025
27 Március 2025
12 Január 2025
23 December 2024
Útmutatók fúrógép
- fúrógép Milwaukee
- fúrógép Parkside
- fúrógép Worx
- fúrógép Bosch
- fúrógép Panasonic
- fúrógép AEG
- fúrógép Einhell
- fúrógép Stihl
- fúrógép Ozito
- fúrógép Hyundai
- fúrógép Flex
- fúrógép Scheppach
- fúrógép Ergotools Pattfield
- fúrógép Ribimex
- fúrógép Mafell
- fúrógép Kraftixx
- fúrógép Cecotec
- fúrógép Genesis
- fúrógép Güde
- fúrógép Hitachi
- fúrógép Toolcraft
- fúrógép Proviel
- fúrógép Hilti
- fúrógép Black & Decker
- fúrógép Workzone
- fúrógép Global
- fúrógép Kawasaki
- fúrógép Fieldmann
- fúrógép GO/ON
- fúrógép PowerPlus
- fúrógép DEDRA
- fúrógép Metabo
- fúrógép Handwerk
- fúrógép Powerfix
- fúrógép Biltema
- fúrógép BaseTech
- fúrógép Bavaria
- fúrógép RYOBI
- fúrógép Proxxon
- fúrógép HiKOKI
- fúrógép Festool
- fúrógép Yato
- fúrógép Velleman
- fúrógép Baumr-AG
- fúrógép McKenzie
- fúrógép Trotec
- fúrógép Delta
- fúrógép Zipper
- fúrógép Bavaria By Einhell
- fúrógép Herkules
- fúrógép Porter-Cable
- fúrógép Tanaka
- fúrógép DeWalt
- fúrógép Stanley
- fúrógép Silverline
- fúrógép Vonroc
- fúrógép Cotech
- fúrógép Alpha Tools
- fúrógép Luxor
- fúrógép Holzmann
- fúrógép Fein
- fúrógép Max Bahr
- fúrógép Cocraft
- fúrógép Craftsman
- fúrógép Laserliner
- fúrógép Maestro
- fúrógép Graphite
- fúrógép Hazet
- fúrógép Ferm
- fúrógép Tryton
- fúrógép Skil
- fúrógép Meec Tools
- fúrógép Sun Joe
- fúrógép Dremel
- fúrógép Tacklife
- fúrógép Ferrex
- fúrógép Maktec
- fúrógép Steren
- fúrógép Bort
- fúrógép Malmbergs
- fúrógép Power Craft
- fúrógép Eibenstock
- fúrógép Topcraft
- fúrógép Festo
- fúrógép Sparky
- fúrógép Gamma
- fúrógép Clas Ohlson
- fúrógép Carat
- fúrógép Kress
- fúrógép Duro
- fúrógép Berner
- fúrógép Varo
- fúrógép Defort
- fúrógép Max
- fúrógép Truper
- fúrógép Kinzo
- fúrógép Bruder Mannesmann
- fúrógép Powerblade
- fúrógép Meister Craft
- fúrógép RIDGID
- fúrógép Rupes
- fúrógép Batavia
- fúrógép Protool
- fúrógép Westfalia
- fúrógép Economy
- fúrógép Huvema
- fúrógép Black Decker
- fúrógép Stomer
- fúrógép Fe Powertools
- fúrógép Elu
- fúrógép Blucave
- fúrógép Ecomac
- fúrógép Lux Tools
- fúrógép Wolfcraft
- fúrógép Kreg
- fúrógép Sthor
- fúrógép Verto
- fúrógép Wurth
- fúrógép Spit
- fúrógép King Craft
- fúrógép Rok
- fúrógép Profitech
- fúrógép Narex
- fúrógép Rikon
- fúrógép Duro Pro
- fúrógép Baier
- fúrógép RUKO
- fúrógép Toolson
- fúrógép Felisatti
- fúrógép MSW
- fúrógép Robust
- fúrógép Einhell Bavaria
- fúrógép MyTool
- fúrógép G-Technology
- fúrógép Rodcraft
- fúrógép Stalco
- fúrógép Total
- fúrógép Netter Vibration
- fúrógép Kraftronic
Legújabb útmutatók fúrógép
2 Április 2025
2 Április 2025
2 Április 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
28 Március 2025
19 Március 2025
15 Március 2025