Használati útmutató Makita 6821

Makita Csavaros gép 6821

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Makita 6821 (32 oldal) a Csavaros gép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/32
GB
Drywall Screwdriver Instruction Manual
F
Visseuse Manuel d’Instructions
D
Schrauber Betriebsanleitung
I
Avvitatrice per Muri a Secco Istruzioni d’Uso
NL
‘‘Drywall’’ schroevendraaier Gebruiksaanwijzing
E
Atornillador ‘‘Drywall’’ Manual de Instrucciones
P
Aparafusadora Manual de Instruço˜ es
DK
Elektronisk Skruemaskine Brugsanvisning
S
Gipsskruvdragare Bruksanvisning
N
Skrutrekker til Gipsskruer Bruksanvisning
SF
Kiviseinäruuvinväännin Käyttöohje
GR ∫·ÙÛ·‚›‰È •ËÚÔ‡ ∆Ô›¯Ô˘ √‰ËÁ›Â˜ ÃÚ‹Ûˆ˜
6821
1 2
3 4
5 6
7 8
2
ENGLISH Explanation of general view
1Locator
2Locking sleeve
3Bit
4Magnetic bit holder
5Switch trigger
6Lock button
7Reversing switch lever
8Clockwise rotation
9Counterclockwise rotation
SPECIFICATIONS
Model 6821
Capacities
Self drilling screw .......................................... 6 mm
Drywall screw ................................................ 5 mm
Bit shank size ............................................. 1/4’’ Hex
No load speed (RPM) ................................ 0 – 4,000
Overall length ............................................... 273 mm
Net weight ....................................................... 1.3 kg
•Due to the continuing program of research and
development, the specifications herein are subject
to change without prior notice.
•Note: Specifications may differ from country to
country.
Power supply
The machine should be connected only to a power
supply of the same voltage as indicated on the
nameplate, and can only be operated on single-phase
AC supply. They are double-insulated in accordance
with European Standard and can, therefore, also be
used from sockets without earth wire.
Safety hints
For your own safety, please refer to enclosed safety
instructions.
These symbols mean:
Read instruction manual.
DOUBLE INSULATION
ADDITIONAL SAFETY RULES
1. Always be sure you have a firm footing.
Be sure no one is below when using the
machine in high locations.
2. Hold the machine firmly.
3. Keep hands away from rotating parts.
4. When driving into walls, floors or wherever
‘‘live’’ electrical wires may be encountered. DO
NOT TOUCH ANY METAL PARTS OF THE
MACHINE!
Hold the machine by the insulated grasping
surfaces to prevent electric shock if you drive
into a ‘‘live’’ wire.
5. Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely
hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
OPERATING INSTRUCTIONS
Removing or installing the bit (Fig. 1 & 2)
Important:
Always be sure that the machine is switched off and
unplugged before removing or installing the bit.
Pull the locator out of the locking sleeve while turning
the locator slightly. Then grasp the bit with a pair of
pliers and pull the bit out of the magnetic bit holder.
Sometimes, it helps to wiggle the bit with the plires as
you pull.
To install the bit, push the bit firmly into the magnetic
bit holder. Then install the locator by pushing it firmly
onto the locking sleeve while turning the locator
slightly.
Depth adjustment (Fig. 3, 4 & 5)
Adjust the locator by turning the locking sleeve. One
full turn of the locking sleeve moves the locator 2 mm.
Initially, adjust the locator so that the tip of the locator
is flush with the base of the screw head. Drive a trial
screw into your material or a piece of duplicate
material. If the depth is not suitable for the screw,
continue adjusting until the proper depth setting is
obtained.
Switch action (Fig. 6)
CAUTION:
Before plugging in the machine, always check to see
that the switch trigger actuates properly and returns to
the ‘‘OFF’’ position when released.
To start the machine, simply pull the trigger. Machine
speed is increased by increasing pressure on the
trigger. Release the trigger to stop.
For continuous operation, pull the trigger and then
push in the lock button. To stop the machine from the
locked position, pull the trigger fully, then release it.
Reversing switch action (Fig. 7)
This machine has a reversing switch to change the
direction of rotation. Move the reversing switch lever
to the ‘‘ ’’ position for clockwise rotation or the
‘‘ ’’ position for counterclockwise rotation.
CAUTION:
•Always check the direction of rotation before opra-
tion.
•Use the reversing switch only after the machine
comes to a complete stop. Charging the direction of
rotation before the machine stops may damage the
machine.
3

Termékspecifikációk

Márka: Makita
Kategória: Csavaros gép
Modell: 6821

Szüksége van segítségre?

Ha segítségre van szüksége Makita 6821, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Csavaros gép Makita

Makita

Makita DHP448 Útmutató

12 Október 2024
Makita

Makita 6906J Útmutató

5 Október 2024
Makita

Makita DTW300Z Útmutató

4 Október 2024
Makita

Makita DA3000V Útmutató

4 Október 2024
Makita

Makita 6952 Útmutató

2 Október 2024
Makita

Makita DTWA190Z Útmutató

2 Október 2024
Makita

Makita TD090D Útmutató

27 Szeptember 2024
Makita

Makita BDF445RHE Útmutató

24 Szeptember 2024
Makita

Makita TW001GD202 Útmutató

24 Szeptember 2024
Makita

Makita DP4010 Útmutató

21 Szeptember 2024

Útmutatók Csavaros gép

Legújabb útmutatók Csavaros gép

Metabo

Metabo SE 2800 Útmutató

13 Január 2025
RYOBI

RYOBI One+ R18IW3 Útmutató

12 Január 2025
Hazet

Hazet 9012EL-SPC Útmutató

12 Január 2025
MSW

MSW -ACW700 Útmutató

11 Január 2025
RYOBI

RYOBI PCL250 Útmutató

5 Január 2025
RYOBI

RYOBI PCL212 Útmutató

5 Január 2025
Hazet

Hazet 9022 P-2 Útmutató

31 December 2025
Milwaukee

Milwaukee M18 BDD Útmutató

30 December 2025
Milwaukee

Milwaukee M12 BDD Útmutató

30 December 2025
Netter Vibration

Netter Vibration PKL 740 Útmutató

29 December 2024