Használati útmutató Lorex LDC6081

Lorex Térfigyelő kamera LDC6081

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lorex LDC6081 (2 oldal) a Térfigyelő kamera kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
Contents
• Weatherproof IR dome camera
• Mounting screws x 4
• 60ft. BNC / power extension cable
• BNC female / RCA male adapter
• Power adapter
Features
• Advanced Sony Super HAD™ II image sensor
• Video image processor produces sharp and clear video at
600 TV lines of resolution
• 4–9mm manual zoom lens for flexible viewing angle
(39–93º diagonal)
• ClearNight imaging technology ensures clear night vision and
improves recording efficiency up to 30%
• Night vision up to 75ft. (23m) away in total darkness*
• Split glass design minimizes IR reflection
• IP66 rated aluminum housing for indoor / outdoor
installations**
Disclaimers:
* Infrared illumination range under ideal conditions. Actual range and clarity may vary depending on
scene / object reflection and camera application.
** Not intended for submersion in water. Installation in a sheltered location recommended.
Warning/Caution
• Read this guide carefully and keep it for future reference
• Follow all instructions for safe use of the product
• Use the camera within given temperature, humidity and voltage
levels noted in Camera Specifications
• Do not disassemble the camera
• Do not point the camera directly towards the sun or a source of
intense light
• Use only the supplied regulated power supply. Use of a non-
regulated, non-conforming power supply can damage this
product and voids the warranty
• The supplied extension cable is rated for surface mounting only
• Cables for in-wall / floor-to-floor installations are sold
separately
Installation Tips
• Point the camera where there is the least amount of obstructions
(i.e. tree branches)
• Install the camera in a location that is difficult for vandals to
reach
• Secure cabling so that it is not exposed or easily cut
• Camera rated for outdoor use. Installation in a sheltered
location recommended
WARNING - A REGULATED UL / CSA APPROVED power supply is
REQUIRED for use with this camera. Use of a non-regulated, non-
conforming power supply can damage this product and voids the
warranty.
Camera Specifications
* IR Illumination Range under ideal conditions. Objects at or beyond this range may be partially or
completely obscured, depending on the camera application.
** Not intended for submersion in water. Installation in a sheltered location recommended.
Dimensions
Copyright © 2011 Lorex Technologies Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE
Image Sensor 1/3” Sony Super HAD™ II
Video Format NTSC
Effective Pixels H: 768 V: 494
Resolution 600 TV Lines
Scan System 2:1 Interlace
Sync System Internal
S / N Ratio 50dB (AGC Off)
Iris AES
AES Shutter Speed 1/60 ~ 1/100,000 sec.
Min. Illumination 0.2 Lux without IR LED
0 Lux with IR LED
Video Output Composite 1.0Vpp @ 75ohm
Lens / Lens Type 4–9mm F1.4 / Varifocal
FOV (Diagonal) 39–93°
Termination BNC Type
IR LED Qty. / Type 28 pieces / 850nm
Night Vision Range* 75ft / 23m
Power Requirement 12V DC ±10%
Power Consumption Max. 400mA (w / IR)
Operating Temp. Range 14° ~ 122°F / –10° ~ 50°C
Operating Humidity Range < 90% RH
Environmental Rating** IP66
Weight (including stand) 1.6lbs. / 0.7kg
120mm / 4.8"
102mm / 4.1”
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
LDC6081
SUPER RESOLUTION WEATHERPROOF
VARIFOCAL NIGHT VISION DOME CAMERA
FOR SUPPORT AND INFORMATION,
VISIT WWW.LOREXTECHNOLOGY.COM
QUICK START GUIDE
English Version 1.0
Installing The Camera
Before installing the camera:
• Decide whether to run the cables
through the wall / ceiling
(drilling required), or along the
wall / ceiling.
• If you run the cables along the
wall / ceiling, you must run the
cable through the cable notch on
the base. This will keep the
camera base flush to the wall /
ceiling when mounted.
To install the camera:
1. Rotate the camera base counterclockwise to separate
it from the ball camera and dome cover.
2. Feed the BNC / power cable through the camera base.
If you are running the cables against a wall or ceiling,
make sure to pass the cable through the cable notch as
shown above.
3. Connect the video and power cable as shown in the
next section ‘Connecting The Camera‘.
4. Mount the camera base to the wall or ceiling using the
included screws.
5. Position the dome cover over the camera and screw it
clockwise halfway onto the camera base.
6. Move the ball camera to the desired position. While
holding the ball camera firmly in place, screw the dome
cover the rest of the way to secure it to the camera base.
Holding the camera prevents it from moving while
installing the dome cover.
ATTENTION - Test all connections and ensure the camera is working
correctly prior to permanent installation by temporarily connecting the
camera(s) and cable(s) to the viewing / recording solution.
Cable notch
Connecting The Camera
Lens Adjustment
Use a flathead screwdriver to adjust the Focus and Zoom control
screws on the camera if necessary.
Note: Have a second person verify the camera image when you
adjust the focus and zoom.
BNC to RCA Adapter
Setup Diagram
Connect the BNC and power
connectors to the camera.
Connect the BNC connector to
the video input of the monitor /
DVR, and connect the included
power connector to a power
adapter. See Setup Diagram
below for details.
Male power
BNC
To Camera: To Monitor / DVR:
Female power
Zoom
Focus
DVR / CCTV MONITOR
Video IN
TV / VCR
Video IN
BNC to RCA Adapter
Attach the included BNC to RCA adapter to connect the
extension cable to RCA inputs (i.e. for a TV connection).
Cable Extension Options
Extend the cable run for your camera up to 300ft. or more
depending on the cable type used. See table below:
Notes:
1. For optimal performance, consider using option 2 or 3. It is best
to use the same cable type for the entire distance.
2. Cable run recommendation based on typical camera power
consumption (up to 500mA). For specialty cameras with higher
current consumption, maximum cable run may be reduced.
Consider providing power to the camera at the camera side,
rather then at the end of the extension cable.
3. Indicators that your cable run may be too long:
• Video is permanently black & white (even during day time)
• Video is distorted
Troubleshooting
Option Cable Type Max Cable
Run Distance
Max. # of
Extensions
1 Regular BNC (supplied with
camera)
180ft. / 55m 3
2 'RG59' or 'Coax' or ' Coaxial'
BNC (sold separately) 300ft. / 92m 5
3 Lorex Universal Cable
(sold separately) 300ft. / 92m 3
Problem Solution
No Picture / Signal • Ensure your TV is on the correct input channel.
Common terms of an input channel: INPUT, AV
CHANNEL, LINE1, LINE2, AUX.
• If your camera is connected to a VCR / DVR,
ensure it is properly connected to your TV /
Monitor.
• Ensure connections are properly connected.
• Ensure the camera power supply is plugged in.
Picture is too bright • Ensure your camera isn’t pointed directly at a
source of light (e.g sun or spot light).
• Slide the sunshade (bullet cameras only)
forward to block excess light.
• Move your camera to a different location.
Picture is too dark • If using during the day, the camera may not be
getting enough light. Slide the sunshade (bullet
cameras only) backwards to let in more light.
• Check the brightness and contrast settings of
the device your camera connects to (TV /
Monitor / DVR).
Night vision is not
working • The night vision activates when light levels
drop. The area may have too much light.
Picture is not clear • Check the camera lens for dirt, dust, and
spiderwebs. Clean the lens with a soft, clean
cloth.
• Make sure that the cable run is within the
limitations specified in the section ' Cable
Extension Options'.
Bright spot in video
when viewing camera
at night
• Night vision reflects when pointing a camera to
a window. Move the camera to a different
location.
BNC connection does
not connect to my TV
• Use a BNC to RCA adapter at the end of the
extension cable.
Camera Base

Termékspecifikációk

Márka: Lorex
Kategória: Térfigyelő kamera
Modell: LDC6081

Szüksége van segítségre?

Ha segítségre van szüksége Lorex LDC6081, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Térfigyelő kamera Lorex

Lorex

Lorex LNZ43P4A Útmutató

8 Január 2025
Lorex

Lorex C221NA Útmutató

8 Január 2025
Lorex

Lorex C221NC Útmutató

8 Január 2025
Lorex

Lorex W463AQ Útmutató

2 Január 2025
Lorex

Lorex E891AB Útmutató

7 Október 2024
Lorex

Lorex DP181-42NAE Útmutató

29 Szeptember 2024
Lorex

Lorex Baby BB2411AC1 Útmutató

8 Szeptember 2024
Lorex

Lorex E842CA Útmutató

2 Szeptember 2024
Lorex

Lorex E842CAWP Útmutató

2 Szeptember 2024
Lorex

Lorex E842CAB Útmutató

2 Szeptember 2024

Útmutatók Térfigyelő kamera

Legújabb útmutatók Térfigyelő kamera

Hikvision

Hikvision DS-2CE10DF8T-FSLN Útmutató

6 Április 2025
Hikvision

Hikvision DS-2CE56C0T-IRPF Útmutató

5 Április 2025
Hikvision

Hikvision DS-2CD2141G1 Útmutató

5 Április 2025
Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Útmutató

15 Január 2025
Toshiba

Toshiba IKS-WR7412 Útmutató

14 Január 2025
Flir

Flir FC-610 O Útmutató

13 Január 2025
AVerMedia

AVerMedia FC1320-P Útmutató

13 Január 2025
Digitus

Digitus OptiMax DN-16037 Útmutató

13 Január 2025
Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Útmutató

13 Január 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Útmutató

13 Január 2025