Használati útmutató Lightware HDMI-TPS-TX210
Lightware
AV hosszabbító
HDMI-TPS-TX210
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lightware HDMI-TPS-TX210 (92 oldal) a AV hosszabbító kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/92
HDMI-TPS-TX210
HDMI-TPS-TX220
DVI-HDCP-TPS-TX210
DVI-HDCP-TPS-TX220
DP-TPS-TX210
DP-TPS-TX220
SW4-TPS-TX240
User’s Manual
HDBaseTTM Multimedia Extender
HDMI-TPS-TX200 series – User's Manual 2
Important Safety Instructions
Class II apparatus construction.
The equipment should be operated only from the power source
indicated on the product.
To disconnect the equipment safely from power, remove the power
cord from the rear of the equipment, or from the power source. The
MAINS plug is used as the disconnect device, the disconnect device
shall remain readily operable.
There are no user-serviceable parts inside of the unit. Removal of the
cover will expose dangerous voltages. To avoid personal injury, do not
remove the cover. Do not operate the unit without the cover installed.
The appliance must be safely connected to multimedia systems.
Follow instructions described in this manual.
Ventilation
For the correct ventilation and to avoid overheating ensure enough
free space around the appliance. Do not cover the appliance, let the
ventilation holes free and never block or bypass the ventilators (if any).
WARNING
To prevent injury, the apparatus is recommended to securely attach to
the oor/wall or mount in accordance with the installation instructions.
The apparatus shall not be exposed to dripping or splashing and that
no objects lled with liquids, such as vases, shall be placed on the
apparatus. No naked ame sources, such as lighted candles, should
be placed on the apparatus.
Waste Electrical & Electronic Equipment
WEEE
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material
resources. Household users should contact either the
retailer where they purchased this product, or their local government
ofce, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for
disposal.
Common Safety Symbols
Symbol Description
Direct current
Alternating current
Double insulation
Caution, possibility of eletric shock
Caution
HDMI-TPS-TX200 series – User's Manual 3
Symbol Legend
The following symbols and markings are used in the document:
WARNING! Safety-related information which is highly
recommended to read and keep in every case!
ATTENTION! Useful information to perform a successful procedure;
it is recommended to read.
INFO: A notice which may contain additional information. Procedure
can be successful without reading it.
DEFINITION: The short description of a feature or a function.
TIPS AND TRICKS: Ideas which you may have not known yet but can
be useful.
Navigation Buttons
Go back to the previous page. If you clicked on a link peviously,
you can go back to the source page by the button.
Navigate to the Table Contents.
Step back one page.
Step forward to the next page.
Document Information
This User’s Manual applies to the following versions of the mentioned
software, rmware, and hardware:
Item Version
Lightware Device Controller (LDC) software 1.17.1.b3
Lightware Device Updater (LDU) software 1.5.0b8
Controller rmware 1.1.1
Hardware 1.2
Document revision: 2.1
Release date: 31-10-2018
Editor: Laszlo Zsedenyi
HDMI-TPS-TX200 series – User's Manual 5
Table of Contents
6.3.4. Lock Output ..................................................................................... 44
6.3.5. Unlock Output ................................................................................. 44
6.3.6. View Connection State on the Output ........................................... 45
6.3.7. View Crosspoint Size ...................................................................... 45
6.3.8. Change Video Autoselect Mode .................................................... 45
6.3.9. Change Audio Autoselect Mode .................................................... 45
6.3.10. Change the Video Input Priorities ................................................ 46
6.3.11. Change Audio Input Priority ......................................................... 46
6.4. Network Configuration .............................................................46
6.4.1. Query the Current IP Status ........................................................... 46
6.4.2. Set the IP Address .......................................................................... 46
6.4.3. Set the Subnet Mask ...................................................................... 46
6.4.4. Set the Gateway Address ............................................................... 47
6.4.5. Apply Network Settings .................................................................. 47
6.5. GPIO Configuration....................................................................47
6.5.1. Set Level and Direction for Each Pins ........................................... 47
6.6. LW2 Commands – Quick Summary ..............................................48
7. LW3 PROGRAMMER'S REFERENCE 49 ...............................................
7.1. Overview .....................................................................................49
7.1.1. Elements of the Tree Structure ...................................................... 49
7.1.2. Escaping .......................................................................................... 51
7.1.3. Error Messages ............................................................................... 51
7.1.4. Prefix Summary .............................................................................. 51
7.2. The Tree Structure of the Transmitter ...................................51
7.3. LW3 Commands ...........................................................................52
7.3.1. Get Command ................................................................................. 52
7.3.2. Set Command ................................................................................. 53
7.3.3. Invocation ....................................................................................... 53
7.3.4. Manual ............................................................................................ 54
7.3.5. Signature ......................................................................................... 54
7.3.6. Subscription .................................................................................... 54
7.3.7. Notifications about the Changes of the Properties ..................... 55
7.4. Formal Definitions .....................................................................55
7.5. System Commands ...................................................................... 56
7.5.1. Query the Product Name ................................................................ 56
7.5.2. Set the Device Label ....................................................................... 56
7.5.3. Query the Serial Number ................................................................ 56
7.5.4. Query the Firmware Version .......................................................... 56
7.5.5. Resetting the Device ....................................................................... 56
7.5.6. Restore the Factory Default Settings ............................................ 56
7.6. Video Port Settings ...................................................................57
7.6.1. Query the Status of Source Ports .................................................. 57
7.6.2. Query the Status of Destination Port ............................................ 58
7.6.3. Query the Video Crosspoint Setting .............................................. 58
7.6.4. Switching Video Input .................................................................... 58
7.6.5. Query the Video Autoselect Settings............................................. 58
7.6.6. Change the Autoselect Mode ........................................................ 58
7.6.7. Query the Input Port Priority .......................................................... 59
7.6.8. Change the Input Port Priority ....................................................... 59
7.6.9. Mute an Input Port .......................................................................... 59
7.6.10. Unmute an Input Port ................................................................... 59
7.6.11. Lock an Input Port ........................................................................ 59
7.6.12. Unlock an Input Port ..................................................................... 59
7.6.13. Mute Output .................................................................................. 59
7.6.14. Unmute Output ............................................................................. 60
7.6.15. Lock Output .................................................................................. 60
7.6.16. Unlock Output ............................................................................... 60
7.6.17. HDCP Setting (Input Port) ............................................................ 60
7.6.18. HDCP Setting (Output Port) ......................................................... 60
7.6.19. Test Pattern Generator ................................................................. 60
7.6.20. HDMI Mode Settings (Output Port) ............................................. 61
7.6.21. Query the Recent TPS Mode ........................................................ 61
7.6.22. TPS Mode Settings ....................................................................... 61
7.7. Audio Port Settings ...................................................................62
7.7.1. Query the Status of Source Ports .................................................. 62
7.7.2. Query the Status of Destination Port ............................................ 62
7.7.3. Query the Audio Crosspoint Setting .............................................. 63
7.7.4. Switching Audio Input .................................................................... 63
7.7.5. Query the Audio Autoselect Settings ............................................ 63
7.7.6. Change the Autoselect Mode ........................................................ 63
7.7.7. Query the Input Port Priority .......................................................... 64
7.7.8. Change the Input Port Priority ....................................................... 64
7.7.9. Mute an Audio Input ....................................................................... 64
7.7.10. Unmute an Audio Input ................................................................ 64
7.7.11. Lock an Input Port ........................................................................ 64
7.7.12. Unlock an Input Port ..................................................................... 64
7.7.13. Mute Audio Output ....................................................................... 64
7.7.14. Unmute Audio Output ................................................................... 65
7.7.15. Lock Output .................................................................................. 65
7.7.16. Unlock Output ............................................................................... 65
7.7.17. Analog Audio Input Level Settings .............................................. 65
7.8. Network Configuration .............................................................65
7.8.1. Query the DHCP State .................................................................... 65
7.8.2. Change the DHCP State ................................................................. 66
7.8.3. Query the IP Address ...................................................................... 66
7.8.4. Change the IP Address (Static) ..................................................... 66
7.8.5. Query the Subnet Mask .................................................................. 66
7.8.6. Change the Subnet Mask (Static) .................................................. 66
7.8.7. Query the Gateway Address .......................................................... 66
7.8.8. Change the Gateway Address (Static) .......................................... 66
7.9. RS-232 Port Configuration .......................................................66
7.9.1. Protocol Setting .............................................................................. 66
7.9.2. BAUD Rate Setting .......................................................................... 67
7.9.3. Databit Setting ................................................................................ 67
7.9.4. Stopbits Setting .............................................................................. 67
7.9.5. Parity Setting................................................................................... 67
7.9.6. RS-232 Operation Mode ................................................................. 67
7.10. Infrared Port Configuration ..................................................68
7.10.1. Enable Command Injection Mode ............................................... 68
7.10.2. Enable/Disable Output Signal Modulation .................................. 68
7.11. Sending Message via the Communication Ports .....................68
7.11.1. Sending Message via TCP Port ................................................... 68
7.11.2. Sending Message via UDP Port ................................................... 68
7.11.3. Sending Message via an RS-232 Port ......................................... 69
7.12. GPIO Port Configuration ......................................................... 69
7.12.1. Set the Direction of a GPIO Pin .................................................... 69
7.12.2. Set the Output Level of a GPIO Pin .............................................. 70
7.12.3. Toggle the Level of a GPIO Pin .................................................... 70
7.13. EDID Management ..................................................................... 70
7.13.1. Query the Emulated EDIDs ........................................................... 70
7.13.2. Query the Validity of a Dynamic EDID ......................................... 70
7.13.3. Query the Preferred Resolution of an User EDID ........................ 70
7.13.4. Emulating an EDID to an Input Port ............................................. 70
7.13.5. Emulating an EDID to All Input Ports ........................................... 70
7.13.6. Copy an EDID to User Memory .................................................... 70
7.13.7. Deleting an EDID from User Memory .......................................... 71
7.13.8. Resetting the Emulated EDIDs ..................................................... 71
7.14. LW3 Commands - Quick Summary .............................................72
8. FIRMWARE UPGRADE 75 ......................................................................
8.1. About the Firmware Package (LFP file) .....................................75
8.2. Short Instructions .................................................................... 75
8.3. Install and Upgrade ..................................................................75
8.4. Detailed Instructions ................................................................76
8.4.1. Establish the Connection ............................................................... 76
8.4.2. Start the LDU and Follow the Instructions .................................... 76
8.5. Keeping the Configuration Settings .........................................79
8.6. Remote Firmware Upgrade of Connected Lightware Devices ...80
2. Installation HDMI-TPS-TX200 series – User's Manual 10
2
Installation
The chapter is about the installation of the device and connecting to other
appliances, presenting also the mounting options and further assembly steps
Î
Î
Î
2.1. Mounting Options
To mount the transmitter Lightware supplies optional accessories for
different usage. There are two kinds of mounting kits with similar
on the bottom side; see the bottom view in the Mechanical Drawings
section. Fasten the device by the screws enclosed to the accessory:
Under-desk double mounting kit
1U high rack shelf
The Under-desk double mounting kit makes easy to mount a single
mounting holes for fastening two half-rack or four quarter-rack sized
units. Pocket-sized devices can also be fastened on the shelf. To order
mounting accessories please contact . sales@lightware.com
WARNING! Always use the supplied screws. Using different (e.g.
longer) ones may cause damage to the device.
INFO: The transmitter is half-rack sized.
2.1.1. 1U High Rack Shelf
Allows rack mounting for half-rack, quarter-rack and pocket sized
units.
1U high rack shelf provides mounting holes for fastening two half-
rack or four quarter-rack sized units. Pocket sized devices can also be
fastened on the self.
Autoselect
HDCP
AUDIO IN
SHOW
ME
AUDIO
SELECT
RESET
AUDIOAUDIOVIDEO
HDMI IN
Autoselect
HDCP
DVI- D IN AUDIO IN
SHOW
ME
AUDIO
SELECT
RESET
VIDEO
AUDIO
AUDIO
2.1.2. Under-desk Double Mounting Kit
The UD-kit double makes it easy to mount a single transmitter on any
INFO: The chipboard screws are not supplied with the mounting kit.
SHOW
ME
AUDIO
SELEC T
VIDEO
SELEC T
VIDEO VIDEO VIDEOAUDIO AUDIO AUDIO VIDEO
AUDIO
RESET
Autoselect
HDCP
AUDIO
DP IN HDMI IN HDMI IN DVI-D IN AUDIO IN5
Termékspecifikációk
| Márka: | Lightware |
| Kategória: | AV hosszabbító |
| Modell: | HDMI-TPS-TX210 |
Szüksége van segítségre?
Ha segítségre van szüksége Lightware HDMI-TPS-TX210, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók AV hosszabbító Lightware
12 Január 2025
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
Útmutatók AV hosszabbító
- AV hosszabbító Nedis
- AV hosszabbító Philips
- AV hosszabbító StarTech.com
- AV hosszabbító LogiLink
- AV hosszabbító Roland
- AV hosszabbító Rocstor
- AV hosszabbító Digitus
- AV hosszabbító Crestron
- AV hosszabbító Gigabyte
- AV hosszabbító Tripp Lite
- AV hosszabbító Renkforce
- AV hosszabbító Iogear
- AV hosszabbító Smart-AVI
- AV hosszabbító Trevi
- AV hosszabbító Planet
- AV hosszabbító Black Box
- AV hosszabbító ATen
- AV hosszabbító Edimax
- AV hosszabbító Bogen
- AV hosszabbító Manhattan
- AV hosszabbító Adder
- AV hosszabbító Kindermann
- AV hosszabbító D-Link
- AV hosszabbító Blustream
- AV hosszabbító Monacor
- AV hosszabbító One For All
- AV hosszabbító Peerless-AV
- AV hosszabbító Abus
- AV hosszabbító Vivotek
- AV hosszabbító AG Neovo
- AV hosszabbító Konig
- AV hosszabbító Marmitek
- AV hosszabbító Pyle
- AV hosszabbító MuxLab
- AV hosszabbító AVMATRIX
- AV hosszabbító DataVideo
- AV hosszabbító Atlona
- AV hosszabbító AJA
- AV hosszabbító Lindy
- AV hosszabbító Marshall Electronics
- AV hosszabbító Siig
- AV hosszabbító Gefen
- AV hosszabbító Vivolink
- AV hosszabbító Schwaiger
- AV hosszabbító Comprehensive
- AV hosszabbító Alfatron
- AV hosszabbító Teufel
- AV hosszabbító SWIT
- AV hosszabbító Belkin
- AV hosszabbító Kopul
- AV hosszabbító Sescom
- AV hosszabbító KanexPro
- AV hosszabbító Kramer
- AV hosszabbító Analog Way
- AV hosszabbító AMX
- AV hosszabbító Allnet
- AV hosszabbító Eminent
- AV hosszabbító Vision
- AV hosszabbító Techly
- AV hosszabbító Matrox
- AV hosszabbító Steren
- AV hosszabbító LevelOne
- AV hosszabbító InFocus
- AV hosszabbító Genexis
- AV hosszabbító Audio Pro
- AV hosszabbító Wentronic
- AV hosszabbító Peerless
- AV hosszabbító Monoprice
- AV hosszabbító MIPRO
- AV hosszabbító I3-Technologies
- AV hosszabbító UTEPO
- AV hosszabbító Aitech
- AV hosszabbító Polycom
- AV hosszabbító Advantech
- AV hosszabbító Micro Connect
- AV hosszabbító Extron
- AV hosszabbító ASSMANN Electronic
- AV hosszabbító Avocent
- AV hosszabbító Rose
- AV hosszabbító Intellinet
- AV hosszabbító Ebode
- AV hosszabbító Accell
- AV hosszabbító Ecler
- AV hosszabbító Rose Electronics
- AV hosszabbító Epcom
- AV hosszabbító CYP
- AV hosszabbító TV One
- AV hosszabbító SmartAVI
- AV hosszabbító IMG Stage Line
- AV hosszabbító Oehlbach
- AV hosszabbító HELGI
- AV hosszabbító Liberty
- AV hosszabbító PureTools
- AV hosszabbító Enson
- AV hosszabbító Approx
- AV hosszabbító Hall Research
- AV hosszabbító WyreStorm
- AV hosszabbító Seco-Larm
- AV hosszabbító ConnectPro
- AV hosszabbító Kanex
- AV hosszabbító TechLogix Networx
- AV hosszabbító C2G
- AV hosszabbító SEADA
- AV hosszabbító PureLink
- AV hosszabbító Camplex
Legújabb útmutatók AV hosszabbító
2 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
1 Április 2025
16 Január 2025
14 Január 2025
14 Január 2025
14 Január 2025
14 Január 2025