Használati útmutató LifeGear Dynasty Elliptical Cross Trainer 93800

LifeGear Szobakerékpár Dynasty Elliptical Cross Trainer 93800

Olvassa el alább 📖 a magyar nyelvű használati útmutatót LifeGear Dynasty Elliptical Cross Trainer 93800 (22 oldal) a Szobakerékpár kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/22
DYNASTY
ELLIPTICAL CROSS TRAINER
ITEM NO: 93800
OWNER’S MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain this
owner’s manual for future reference.
The specifications of this product may vary from this photo, subject to change without notice.
2014, May
1
TABLE OF CONTENTS
WARRANTY ------------------------------------------------------------------------------- 2
IMPORTANT SAFETY INSTRUCTIONS ------------------------------------------- 3
PARTS LIST ------------------------------------------------------------------------------- 4
HARDWARE LIST ----------------------------------------------------------------------- 6
TOOLS -------------------------------------------------------------------------------------- 6
OVERVIEW DRAWING ----------------------------------------------------------------- 7
ASSEMBLY INSTRUCTIONS --------------------------------------------------------- 8
OPERATING THE COMPUTER ------------------------------------------------------ 16
ADJUSTMENTS -------------------------------------------------------------------------- 18
MAINTENANCE -------------------------------------------------------------------------- 19
TROUBLESHOOTING ------------------------------------------------------------------ 19
WARM UP AND COOL DOWN ROUTINE ----------------------------------------- 20
2
ONE YEAR LIMITED WARRANTY
LifeGear Inc. warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the conditions that it
has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's
obligation under this warranty is limited to replacing or repairing free of charge, any parts
which may prove to be defective under normal home use. This warranty does not include
any damage caused by improper operation, misuse or commercial application.
From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.
This warranty is offered only to the original owner and is not transferable. Proof of
purchase is required.
When ordering replacement parts please have the following information ready:
1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
3
IMPORTANT SAFETY INSTRUCTIONS
Basic precautions should always be followed, including the following important
safety instructions when using this equipment. Read all instructions before using
this equipment.
1. Read all instructions and follow it carefully before using this equipment. Make sure the
equipment is properly assembled and tightened before use.
2. Before exercise, in order to avoid injuring the muscle, warm-up exercises are
recommended.
3. Please make sure all parts are not damaged and fixed well before use. This
equipment should be placed on a flat surface when using. Using a mat or other
covering material on the ground is recommended.
4. Please wear proper clothes and shoes when using this equipment; do not wear clothes
that may catch any part of the equipment.
5. Do not attempt any maintenance or adjustments other than those described in this
manual. Should any problems arise, discontinue use and consult your local dealer.
6. Be careful when step on or leave the pedal always hold the handlebars first. Make the
pedal at your side at the lowest position, step on the pedal, and stride over the main
frame then step on the other pedal. When using, please hold the handlebar by hands,
make the pedals running smoothly by push or pull handlebars, then run the equipment
regularly by cooperation of hands and feet. After exercise, please also make one
pedal at the lowest position and leave your foot on the higher pedal first and then
another.
7. Do not use the equipment outdoors.
8. This equipment is for household use only. It is not a commercial model.
9. Only one person at a time should use this equipment.
10. If you feel any chest pains, nausea, dizziness, or short of breath, you should stop
exercising immediately and consult your physician before continuing.
11. Care should be taken in mounting or dismounting the equipment.
12. Do not allow children to use or play on the equipment. Keep children and pets away
from the equipment while in use. This machine is designed for adults use only. The
minimum free space required for safe operation is not less than two meters.
13. The maximum weight capacity for this product is 120 kgs.
WARNING: Before beginning any exercise program consult your physician.
This is especially important for the people who are over 35 years old or who have
pre-existing health problems. Read all instructions before using any fitness
equipment.
CAUTION: Read all instructions carefully before operating this product.
Retain this Owner’s Manual for future reference.
4
PARTS LIST
No. Description Qty No. Description Qty
001 Handrail End Cap Ø32x1.5 2 019 Hexagon Socket Pan Head Cap
Bolt Ø10x46 2
002L Left Handrail Ø32x1.5 1 020 Big Washer Ø6xØ18x1.5 2
002R Right Handrail Ø32x1.5 1 021 Cross Recessed Pan Head Bolt
M6x15 6
003 Handrail Foam Grip
Ø31xØ37x480 2 022 Hexagon Bolt M6x40 6
004 Cross Recessed Pan Head
Tapping Screw ST4.2x12 8 023L Left Foot Pedal 1
005 Left Handrail Arm Cover-A 1 023R Right Foot Pedal 1
006 Nylon Nut M6 16 024 Washer Ø6xØ12x1 7
007 Curve Washer Ø6xØ12x1 4 025 Hexagon Bolt M8x50 2
008 Carriage Bolt M6x35 4 026 Powder Metal Bushing
Ø18xØ8x10 4
009 Screw ST4.2x20 18 027L Left Foot Bar 40x25x1.5 1
010 Left Handrail Arm Cover-B 1 027R Right Foot Bar 40x20x1.5 1
011 Hexagon Socket Pan Head Cap
Bolt M8x20 4 028 Washer Ø16xØ8x1.5 2
012 Spring Washer Ø8 10 029 Nylon Nut M8 2
013 Big Washer Ø8xØ25x2 4 030 Foot Bar Bracket Cover 2
014 Washer Ø38x16.5xδ3 4 031 Handlebar End Cap Ø28.6x1.5 2
015 Powder Metal Bushing
Ø38xØ32xØ19x14 8 032 Hand Pulse Sensor with Wire
L=750 mm 2
016L Left Handrail Arm Ø32x1.5 1 033 Hexagon Socket Pan Head Cap
Bolt M8x15 10
016R Right Handrail Arm Ø32x1.5 1 034 Curve Washer Ø16xØ8x1.5 4
017 Powder Metal Bushing
Ø14xØ10x10 4 035 Cross Recessed Pan Head
Tapping Screw ST4.2x20 2
018L Front Foot Bar Cover-A 2 036 Handlebar Foam Grip
Ø33xØ27x360 2
018R Front Foot Bar Cover-B 2 037 Handlebar Ø28.6x2 1
6
PARTS LIST
No. Description Qty No. Description Qty
086 Hexagon Socket Pan Head Cap
Bolt M8x25 1 092 Rear Left Stabilizer End Cap 1
087 Idler Arm 1 093 Rear Stabilizer 55x50x1.5 1
088 Hexagon Socket Pan Head Cap
Bolt M8x10 1 094 Rear Right Stabilizer End Cap 1
089 Belt Pulley Ø260 1 095 Hexagon Nut M10 2
090 Belt PJ400 1 096 Tablet and Water Bottle Holder 1
091 Plastic Screw Anchor Ø8x32 1 097 Tablet and Water Bottle Holder
Frame 1
HARDWARE LIST
TOOLS
(4) Cross Recessed Pan Head
Tapping Screw ST4.2x12
8 PCS
(6) Nylon Nut M6
10 PCS
(7) Curve Washer Ø6xØ12x1
4 PCS
(8) Carriage Bolt M6x35
4 PCS
(22) Hexagon Bolt M6x40
6 PCS
(24) Washer Ø6xØ12x1
6 PCS
(48) Big Curve Washer
Ø8xØ20x2
4 PCS
(54) Cap Nut M8
4 PCS
(56) Carriage Bolt
M8x65
4 PCS
Allen Wrench S6
1 PC
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
1 PC
7
75 76
69 70 71
72
69
71
678
21
89
68 67
9
65 15 64 15 14 13 12 11
63R
66
74
74
9
62 61
73L
9
73R 9
68
61
11 12 13 14 15 64 15 65
62
9
9
60
60
63L
60
60
60
60
67
66
56
95
48
54 94
93
92
95
55 55
54
48
57
58
59
652 53
53
56
9
9
52 6
16L
16R
37
36
36
48 12 33
43 44
46
31 32
11 12 13 14 15
15 14 13 12 11
17
17
17
21
19
20
21
82
77 78 79 80 81
77 78 79 80
81
83 24 84 85 85 84
88
87
2L
1
2R 3
1
3
4
67
8
5
9
9
10
67
8
450
9
51 9
9
24
6
15
20
19
18L
9
18R 4
17
22
25
26
27L
26
28
29
25
26
27R
26
28
29
30
9
23L
23R
33 34 35
32
39
40
38
4
41
42
39
45
47
46
49
15
49
24
6
22
18R 4
18L
9
30
9
86
90
91
4
9
60
75
33 34
97
96
OVERVIEW DRAWING
8
ASSEMBLY INSTRUCTIONS
1. Front and Rear Stabilizers Installation
Position the Front Stabilizer (58) in front of Main Frame (72) and align bolt holes.
Attach the Front Stabilizer (58) onto the front curve of the Main Frame (72) with two
Ø8xØ20x2 Big Curve Washers (48), two M8 Cap Nuts (54), and two M8x65 Carriage Bolts
(56). Tighten cap nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Position the Rear Stabilizer (93) behind the Main Frame (72) and align bolt holes.
Attach the Rear Stabilizer (93) onto the rear curve of the Main Frame (72) with two
Ø8xØ20x2 Big Curve Washers (48), two M8 Cap Nuts (54), and two M8x65 Carriage Bolts
(56). Tighten cap nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
(48) Big Curve Washer
Ø8xØ20x2
4 PCS
(54) Cap Nut M8
4 PCS
(56) Carriage Bolt
M8x65
4 PCS
Tool:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
54
72
93
48
56
54
48
58
56
9
2. Front Post Installation
Remove six M8x15 Hexagon Socket Pan Head Cap Bolts (33), six Ø8 Spring Washers (12),
and six Ø8xØ20x2 Big Curve Washers (48) from the Main Frame (72). Remove bolts with
the S6 Allen Wrench provided.
Insert the Tension Cable (46) through into the bottom hole of Front Post (47) and pull it out
from the square hole of Front Post (47).
Connect the Sensor Wire (75) from the Main Frame (72) to the Extension Sensor Wire (39)
from the Front Post (47).
Insert the Front Post (47) onto the tube of the Main Frame (72) and secure with six M8x15
Hexagon Socket Pan Head Cap Bolts (33), six Ø8 Spring Washers (12), and six Ø8xØ20x2
Big Curve Washers (48) that were removed. Tighten bolts with the S6 Allen Wrench
provided.
Remove the M5x55 Cross Recessed Pan Head Bolt (43) and Ø5xØ19xδ1 Curve Washer
(44) from the Tension Control Knob (45). Remove bolt with the Multi Hex Tool with Phillips
Screwdriver provided.
Put the cable end of resistance cable of Tension Control Knob (45) into the cable lock of
Tension Cable (46), see Figure A.
Pull the resistance cable of Tension Control Knob (45) up and force it into the slot of metal
bracket of Tension Cable (46), see Figure B.
Insert the metal fitting on the resistance cable of Tension Control Knob (45) into the hole at
the end of the slot in the metal bracket of Tension Cable (46), see Figure C.
Connect the resistance cable of Tension Control Knob (45) to Tension Cable (46) complete,
see Figure D.
Attach the Tension Control Knob (45) onto the Front Post (47) with the M5x55 Cross
Recessed Pan Head Bolt (43) and Ø5xØ19xδ1 Curve Washer (44) that were removed.
Tighten bolt with the Multi Hex Tool with Phillips Screwdriver provided.
48 12 33
43
44
46
39
47
75
45
72
39
46
33 12 48
Allen Wrench S6
Tools:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
A
B
C
D
46
45
46
46
46
45
45
45
10
3. Left/Right Handrail Arms, Left/Right Foot Bars, Left/Right Foot Pedals, Foot Bar
Covers-A/B, and Foot Bar Bracket Covers Installation
Remove one M8x20 Hexagon Socket Pan Head Cap Bolt (11), one Ø8 Spring Washer (12),
one Ø8xØ25x2 Big Washer (13), and one Ø38x16.5xδ3 Washer (14) from the left horizontal
axis of the Front Post (47). Remove bolts with the S6 Allen Wrench Tool provided.
Attach the Left Handrail Arm (16L) onto the left horizontal axis of the Front Post (47) with
one M8x20 Hexagon Socket Pan Head Cap Bolt (11), one Ø8 Spring Washer (12), one
Ø8xØ25x2 Big Washer (13), and one Ø38x16.5xδ3 Washer (14) that were removed.
Tighten bolt with the S6 Allen Wrench provided.
Remove one M8x20 Hexagon Socket Pan Head Cap Bolt (11), one Ø8 Spring Washer (12),
one Ø8xØ25x2 Big Washer (13), and one Ø38x16.5xδ3 Washer (14) from the left Crank (67).
Remove bolt with the S6 Allen Wrench provided.
Attach the left Foot Bar Bracket (64) to the left Crank (67) with one M8x20 Hexagon Socket
Pan Head Cap Bolt (11), one Ø8 Spring Washer (12), one Ø8xØ25x2 Big Washer (13), and
one Ø38x16.5xδ3 Washer (14) that were removed. Tighten bolt with the S6 Allen Wrench
Allen Wrench S6
Tools:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
9
24
6
18L
9
18R 4
22
23L
11 12 13 14
16L
49
16R
47
11 12 13 14
9
64
27L
65
27R
23R
67
30
11
provided.
Attach the Left Foot Pedal (23L) onto the Left Foot Bar (27L) with three M6 Nylon Nuts (6),
three Ø6xØ12x1 Washers (24), and three M6x40 Hexagon Bolts (22). Tighten nylon nuts
with the Multi Hex Tool with Phillips Screwdriver provided.
Remove two ST4.2x20 Screws (9) from the front end of the Left Foot Bar (27L). Remove
screws with the Multi Hex Tool with Phillips Screwdriver provided.
Attach the Front Foot Bar Covers-A/B (18L, 18R) onto the front end of the Left Foot Bar (27L)
with two ST4.2x20 Screws (9) and one ST4.2x12 Cross Recessed Pan Head Tapping Screw
(4). Tighten screws with the Multi Hex Tool with Phillips Screwdriver provided.
Remove one ST4.2x20 Screw (9) from the rear end of the Left Foot Bar (27L). Remove
screw with the Multi Hex Tool with Phillips Screwdriver provided.
Attach the Foot Bar Bracket Cover (30) onto the rear end of the Left Foot Bar (27L) with one
ST4.2x20 Screw (9). Tighten screw with the Multi Hex Tool with Phillips Screwdriver
provided.
Repeat the same procedure for attaching the Right Handrail Arm (16R) onto the right
horizontal axis of the Front Post (47) and right Foot Bar Bracket (64) to the right Crank (67).
Hardware:
(22) Hexagon Bolt M6x40
6 PCS
(24) Washer Ø6xØ12x1
6 PCS
(6) Nylon Nut M6
6 PCS
(4) Cross Recessed Pan Head
Tapping Screw ST4.2x12
2 PCS
12
4. Left and Right Handrails Installation
Attach the Left/Right Handrails (2L, 2R) onto the Left/Right Handrail Arms (16L, 16R) with
four M6 Nylon Nuts (6), four Ø6xØ12x1 Curve Washers (7), and four M6x35 Carriage Bolts
(8). Tighten nylon nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
(6) Nylon Nut M6
4 PCS
(7) Curve Washer Ø6xØ12x1
4 PCS
(8) Carriage Bolt M6x35
4 PCS
Tool:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
6
16L 16R
7
8
2L 2R

Termékspecifikációk

Márka: LifeGear
Kategória: Szobakerékpár
Modell: Dynasty Elliptical Cross Trainer 93800

Szüksége van segítségre?

Ha segítségre van szüksége LifeGear Dynasty Elliptical Cross Trainer 93800, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Szobakerékpár LifeGear

Útmutatók Szobakerékpár

Legújabb útmutatók Szobakerékpár