Használati útmutató Lexmark X945

Lexmark nincs kategorizálva X945

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lexmark X945 (31 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/31
Lexmark ™ X94x
Troubleshooting
Guide
Troubleshooting
Checking an unresponsive
printer
If your printer is not responding, make sure:
•The power cord is plugged into the printer and a properly
grounded electrical outlet.
•The electrical outlet is not turned off by any switch or breaker.
•The (GFCI) has not tripped.Ground Fault Circuit Interrupter
From the back of the printer, press the GFCI buttonReset
located above the printer power cord.
•The printer is not plugged into any surge protectors,
uninterrupted power supplies, or extension cords.
•Other electrical equipment plugged into the outlet is working.
•The printer is turned on.
•The printer cable is securely attached to the printer and the
host computer, print server, option, or other network device.
Once you have checked each of these possibilities, turn the printer
off and then back on. This often fixes the problem.
Door A will not shut properly
Make sure the green paper jam clearance lever behind Door A is
in place:
1Press down on the white release lever beneath Door A at the
top of the printer, and then open the door.
2Press the A1 green lever down to its normal position.
3Close Door A.
Solving printing problems
Multiple-language PDFs do not print
The documents contain unavailable fonts.
1Open the document you want to print in Adobe Acrobat.
2Click the printer icon.
The Print dialog appears.
3Select .Print as image
4Click OK.
Control panel display is blank or
displays only diamonds
The printer self test failed. Turn the printer off, wait about 10
seconds, and then turn the printer back on.
If Performing Self Test and Ready do not appear, turn the
printer off and contact Customer Support.
1
Error message about reading USB
drive appears
Make sure the USB drive is supported. For information regarding
tested and approved USB flash memory devices, visit the Lexmark
Web site at .www.lexmark.com
Jobs do not print
These are possible solutions. Try one or more of the following:
M AKE SURE THE PRINTER IS READY TO PRINT
Make sure or appears on the displayReady Power Saver
before sending a job to print.
C HECK TO SEE IF THE STANDARD EXIT BIN IS FULL
Remove the stack of paper from the standard exit bin.
C HECK TO SEE IF THE PAPER TRAY IS EMPTY
Load paper in the tray.
M AKE SURE THE CORRECT PRINTER SOFTWARE IS
INSTALLED
•Verify that you are using the correct printer software.
•If you are using a USB port, make sure you are running
Windows Vista, Windows XP, Windows Server 2003, or
Windows 2000/Me/98 and using compatible printer
software.
M AKE SURE THE INTERNAL PRINT SERVER IS INSTALLED
PROPERLY AND WORKING
•Make sure the internal print server is properly installed and
that the printer is connected to the network.
•Print a network setup page and check that the status shows
Connected Not Connected. If the status is , check the
network cables, and then try printing the network setup
page again. Contact your system support person to make
sure the network is functioning correctly.
Copies of the printer software are also available on the Lexmark
Web site at .www.lexmark.com
M AKE SURE YOU ARE USING A RECOMMENDED
USB, SERIAL, EOR THERNET CABLE
For more information, visit the Lexmark Web site at
www.lexmark.com.
M AKE SURE PRINTER CABLES ARE SECURELY
CONNECTED
Check the cable connections to the printer and print server to
make sure they are secure.
For more information, see the setup documentation that came
with the printer.
Confidential and other held jobs do
not print
These are possible solutions. Try one or more of the following:
H ?AS A FORMATTING ERROR OCCURRED
If so, delete the job and try printing it again. Only part of the
job may print.
M AKE SURE THE PRINTER HAS SUFFICIENT MEMORY
Free up additional printer memory by scrolling through the list
of held jobs and deleting some of them.
C HECK TO SEE IF THE PRINTER HAS RECEIVED INVALID
DATA
Delete invalid jobs.
Job takes longer than expected to
print
These are possible solutions. Try one or more of the following:
R EDUCE THE COMPLEXITY OF THE PRINT JOB
Eliminate the number and size of fonts, the number and
complexity of images, and the number of pages in the job.
C P P OHANGE THE AGE ROTECT SETTING TO FF
1Make sure the printer is on and appears.Ready
2On the home screen, touch .
3Touch .Settings
4Touch .General Settings
5Touch repeatedly until appears.Print Recovery
6Touch until appears.Off
7Touch .Submit
8Touch .
Job prints from the wrong tray or on
the wrong paper
C HECK THE P T APER YPE SETTING
Make sure the Paper Type setting matches the paper loaded in
the tray.
Incorrect characters print
Cause Solution
Printer is in Hex Trace mode. If appears on theReady Hex
display, you must exit Hex Trace
mode before you can print your job.
Turn the printer off and back on to
exit Hex Trace mode.
Tray linking does not work
A RE THE SAME SIZE AND TYPE OF PAPER LOADED IN
EACH TRAY ?
•Load the same size and type of paper in each tray.
•Move the paper guides to the correct positions for the paper
size loaded in each tray.
2
ARE THE PAPER SIZE AND PAPER TYPE SETTINGS THE
SAME FOR EACH TRAY ?
•Print a menu settings page and compare the settings for
each tray.
•If necessary, adjust the settings from the Paper Size/Type
menu.
Note: The multipurpose feeder does not automatically sense
the paper size. You must set the size from the Paper Size/Type
menu.
Large jobs do not collate
These are possible solutions. Try one or more of the following:
M OAKE SURE COLLATE IS SET TO N
From the Finishing menu or Print Properties, set Collate to On.
Note: Setting Collate to Off in the software overrides the
setting in the Finishing menu.
R EDUCE THE COMPLEXITY OF THE PRINT JOB
Reduce the complexity of the print job by eliminating the
number and size of fonts, the number and complexity of
images, and the number of pages in the job.
M AKE SURE THE PRINTER HAS ENOUGH MEMORY
Add printer memory or an optional hard disk.
Unexpected page breaks occur
Increase the Print Timeout value:
1Make sure the printer is on and appears.Ready
2On the home screen, touch .
3Touch .Settings
4Touch .General Settings
5Touch repeatedly until appears.Timeouts
6Touch .Timeouts
7Touch the next to Print Timeout repeatedly until the
desired value appears.
8Touch .Submit
9Touch .
Solving copy problems
Copier does not respond
These are possible solutions. Try one or more of the following:
A ?RE THERE ANY ERROR MESSAGES ON THE DISPLAY
Clear any error messages.
C HECK THE POWER
Make sure the printer is plugged in, the power is on, and
Ready appears.
Scanner unit does not close
Make sure there are no obstructions:
1Lift the scanner unit.
2Remove any obstruction keeping the scanner unit open.
3Lower the scanner unit.
Poor copy quality
These are some examples of poor copy quality:
•Blank pages
•Checkerboard pattern
•Distorted graphics or pictures
•Missing characters
•Faded print
•Dark print
•Skewed lines
•Smudges
•Streaks
•Unexpected characters
•White lines in print
These are possible solutions. Try one or more of the following:
A RE THERE ANY ERROR MESSAGES ON THE DISPLAY ?
Clear any error messages.
I ?S THE TONER LOW
When appears or when the print88 <color> Toner Low
becomes faded, replace the toner cartridge(s).
I ?S THE SCANNER GLASS DIRTY
Clean the scanner glass with a clean, lint-free cloth dampened
with water.
I ?S THE COPY TOO LIGHT OR TOO DARK
Adjust the density of the copy.
C HECK THE QUALITY OF THE ORIGINAL DOCUMENT
Make sure the quality of the original document is satisfactory.
C HECK THE DOCUMENT PLACEMENT
Make sure the document or photo is loaded facedown on the
scanner glass in the upper left corner.
U NWANTED TONER IS IN THE BACKGROUND
•Increase the background removal setting.
•Adjust the darkness to a lighter setting.
P ATTERNS ( ) MOIRÉ APPEAR IN THE OUTPUT
•On the copy screen, touch the Text/Photo or Printed Image
icon.
•Rotate the original document on the scanner glass.
•On the copy screen, adjust the scale setting.
B LACK TEXT IS LIGHT OR DISAPPEARING
•On the copy screen, touch the Text icon.
•Decrease the background removal setting.
•Increase the contrast setting.
•Decrease the shadow detail setting.
3
THE OUTPUT APPEARS WASHED OUT OR OVEREXPOSED
•On the copy screen, touch the Printed Image icon.
•Decrease the background removal setting.
Partial document or photo copies
These are possible solutions. Try one or more of the following:
C HECK THE DOCUMENT PLACEMENT
Make sure the document or photo is loaded facedown on the
scanner glass in the upper left corner.
C HECK THE P S APER IZE SETTING
Make sure the Paper Size setting matches the paper loaded in
the tray.
Solving scanner problems
Checking an unresponsive scanner
If your scanner is not responding, make sure:
•The three cables located on the back of the scanner are
attached to the printer securely.
•The printer is turned on.
•The printer cable is securely attached to the printer and the
host computer, print server, option, or other network device.
•The power cord is plugged into the printer and a properly
grounded electrical outlet.
•The electrical outlet is not turned off by any switch or breaker.
•The printer is not plugged into any surge protectors,
uninterrupted power supplies, or extension cords.
•Other electrical equipment plugged into the outlet is working.
Once you have checked each of these possibilities, turn the printer
off and then back on. This often fixes the problem with the scanner.
Scan was not successful
These are possible solutions. Try one or more of the following:
C HECK THE CABLE CONNECTIONS
Make sure the network or USB cable is securely connected to
the computer and the printer.
A N ERROR MAY HAVE OCCURRED IN THE PROGRAM
Turn off and then restart the computer.
Scanning takes too long or freezes the
computer
These are possible solutions. Try one or more of the following:
D O YOU HAVE ANY OTHER SOFTWARE PROGRAMS
RUNNING?
Close all programs not being used.
T HE SCAN RESOLUTION MAY BE SET TOO HIGH
Select a lower scan resolution.
Poor scanned image quality
These are possible solutions. Try one or more of the following:
A RE THERE ANY ERROR MESSAGES ON THE DISPLAY ?
Clear any error messages.
I ?S THE SCANNER GLASS DIRTY
Clean the scanner glass with a clean, lint-free cloth dampened
with water.
A DJUST THE SCAN RESOLUTION
Increase the resolution of the scan for a higher quality output.
C HECK THE QUALITY OF THE ORIGINAL DOCUMENT
Make sure the quality of the original document is satisfactory.
C HECK THE DOCUMENT PLACEMENT
Make sure the document or photo is loaded facedown on the
scanner glass in the upper left corner.
Partial document or photo scans
These are possible solutions. Try one or more of the following:
C HECK THE DOCUMENT PLACEMENT
Make sure the document or photo is loaded facedown on the
scanner glass in the upper left corner.
C HECK THE P S APER IZE SETTING
Make sure the Paper Size setting matches the paper loaded in
the tray.
Cannot scan from a computer
These are possible solutions. Try one or more of the following:
A RE THERE ANY ERROR MESSAGES ON THE DISPLAY ?
Clear any error messages.
C HECK THE POWER
Make sure the printer is plugged in, the power is on, and
Ready appears.
C HECK THE CABLE CONNECTIONS
Make sure the network or USB cable is securely connected to
the computer and the printer.
Solving fax problems
Caller ID is not shown
Contact your telecommunications company to verify that your
telephone line is subscribed to the caller ID service.
4

Termékspecifikációk

Márka: Lexmark
Kategória: nincs kategorizálva
Modell: X945

Szüksége van segítségre?

Ha segítségre van szüksége Lexmark X945, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Lexmark

Lexmark

Lexmark Clinical Assistant Útmutató

27 Szeptember 2024
Lexmark

Lexmark Cloud Services Útmutató

24 Szeptember 2024
Lexmark

Lexmark CS927 Útmutató

19 Szeptember 2024
Lexmark

Lexmark MC3224 Útmutató

3 Szeptember 2024
Lexmark

Lexmark E234 Útmutató

17 Augusztus 2024
Lexmark

Lexmark Solution Composer Útmutató

14 Augusztus 2024
Lexmark

Lexmark Multi-Send Útmutató

11 Augusztus 2024
Lexmark

Lexmark Prospect Pro208 Útmutató

4 Augusztus 2024
Lexmark

Lexmark CS622 Útmutató

3 Augusztus 2024
Lexmark

Lexmark Prestige Pro808 Útmutató

1 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
Soundstream

Soundstream VRN-64HBL Útmutató

10 Április 2025
Panasonic

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025
Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025