Használati útmutató Leviton SRJPB

Leviton nincs kategorizálva SRJPB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Leviton SRJPB (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/1
IMPORTANT
INSTRUCTIONS
1. Read and understand all instructions. Follow all
warnings and instructions marked on the product.
2. Do not use this product near water e.g., near a —
tub, wash basin, kitchen sink or laundry tub, in a
wet basement, or near a swimming pool.
3. Never push objects of any kind into this product
through openings, as they may touch dangerous
voltage s.
4. SAVE THESE INSTRUCTIONS.
SAFETY
INFORMATION
1. Never install communications wiring or
components during a lightning storm.
2. Never install communications components in wet
locations unless the components are designed
specifically for use in wet locations.
3. Never touch uninsulated wires or terminals unless
the wiring has been disconnected at the network
interface.
4. Use caution when installing or modifying
communications wiring or components.
The Leviton Secure RJ System consists
of three basic parts:
1. Secure RJ Patch Cord (See Image C) –
available in Category 6 or Category 6A. It is
a regular data patch cord assembly with
Secure Housings covering the plugs at each
end. Standard product is available with red,
white, or blue cable jacket, and in lengths of
5, 10, or 20 feet (approx. 1.5, 3, or 6
meters). The Secure Housings at the ends
of the cords are available in 8 colors. Each
color of housing is uniquely keyed .
Custom length and dierent color cable jacket
Secure RJ Patch Cords are available
through Leviton’s Make- -Order (MTO) to
program. Cords with just one end
congured for Secure RJ are also available.
Please contact your Manufacturer’s
Representative or Leviton Network
Solutions Inside Sales Department
(1.800.722.2082) for a quote on custom
product.
2. Secure RJ Extraction Tool (See Image B) –
The Extraction tool is available in the same
8 colors as the Secure Housings on the
ends of the Secure RJ Patch Cords. The 8
colors of Extraction Tool are each also
uniquely keyed to match the keying patterns
of the Secure Housings. A same-color
Extraction Tool is required to remove a
Secure RJ Patch Cord from the data port
or jack.
Additionally, there is a Master Extraction Tool
available, which is a dierent color than the
other Extraction Tools. The Master
Extraction Tool will allow the removal of any
Secure RJ component from a data port or
jack.
3. Secure RJ Port Blocker (See Image A) –
This port blocking device is available in the
same 8 colors as the other parts. It also
requires a same-color Secure RJ Extraction
Tool (or the Master Extraction Tool) for
removal from a data port or jack.
Use of the Leviton Secure RJ System:
Caution: Before plugging any Secure RJ
component into a data port or jack be sure that
a same- lor extraction tool is available for the co
removal of the Secure RJ device from the jack!
1. Ensure that the correct data-rated patch
cord is being used: Category 6 or
Category 6A. (Use a Category 6 Secure
RJ Patch Cord if Secure RJ functionality is
desired in a Category 5e installation).
2. Use of Secure RJ Patch Cord Plug the –
Secure RJ Patch Cord into any data port
or jack, just as a regular data patch cord
would be used. Use cords with common-
colored Secure Housings to identify or
segregate dierent data networks, to
identify tenants in a shared data facility,
etc.
3. Use of Secure RJ Port Blocker – Plug the
Secure RJ Port Blocker into any data port
or jack. Use the port blocker device to
protect, reserve, identify, or secure unused
ports in a data installation. Example: A
data network is connected with Secure RJ
Patch Cords with red Secure Housings at
the ends. There is a need to reserve ports
for future expansion of the “Red” network.
Use red Secure RJ Port Blockers to
reserve these ports.
4. Use of the Secure RJ Extraction Tool (See
Image D) Observe that the Secure RJ –
Extraction Tool has a “Cord Here”
designation on one side. This side goes
next to the patch cord. Insert the keyed
end of the Extraction Tool into the rear of a
same-color Secure Housing. When the
Extraction Tool clicks into place, gently pull
back to remove the Secure RJ Patch Cord
from the jack. The same tool works for
extracting Secure RJ Patch Cords and
Secure RJ Port Blockers. The Master
Extraction Tool will remove any Secure RJ
device.
SRJ6*, SRJA*, SRJPB,
SRJET, SRJMT
Secure RJ System
Instructions for Use
2011 © Leviton Manufacturing Co., Inc.
Customer Support: 800-824-3005
International: 425-486-2222
Web: www.leviton.com
A
D
C
B

Termékspecifikációk

Márka: Leviton
Kategória: nincs kategorizálva
Modell: SRJPB

Szüksége van segítségre?

Ha segítségre van szüksége Leviton SRJPB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Leviton

Leviton

Leviton 4999K-GLC Útmutató

4 Szeptember 2024
Leviton

Leviton 4999K-LLC Útmutató

4 Szeptember 2024
Leviton

Leviton 4999K-YLC Útmutató

4 Szeptember 2024
Leviton

Leviton 4999K-OLC Útmutató

4 Szeptember 2024
Leviton

Leviton 4999K-ELC Útmutató

4 Szeptember 2024
Leviton

Leviton 4999K-VLC Útmutató

4 Szeptember 2024
Leviton

Leviton 49990-LDL Útmutató

3 Szeptember 2024
Leviton

Leviton 41089-2EP Útmutató

19 Augusztus 2024
Leviton

Leviton 49005-DMB Útmutató

18 Augusztus 2024
Leviton

Leviton 5WSML-02C Útmutató

18 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Roland

Roland SD-20 Útmutató

16 Október 2024
SilverCrest

SilverCrest SRG 1300 C3 Útmutató

16 Október 2024
IFM

IFM TY0058 Útmutató

16 Október 2024
Thule

Thule Kit 186039 Útmutató

16 Október 2024
Blumfeldt

Blumfeldt Solidflor Útmutató

16 Október 2024
Dimplex

Dimplex QRAD200E Útmutató

16 Október 2024
DAS Audio

DAS Audio AX-112-5 Útmutató

16 Október 2024
Ferplast

Ferplast Ergocomfort Freetime Útmutató

16 Október 2024
AEG

AEG MECK52 Útmutató

16 Október 2024
Black Diamond

Black Diamond BD1121530000ALL1 Útmutató

16 Október 2024