Használati útmutató La Crosse Technology 513-1311OTN

Olvassa el alább 📖 a magyar nyelvű használati útmutatót La Crosse Technology 513-1311OTN (6 oldal) a óra kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/6
ATOMIC DIGITAL WALL CLOCK
Model: 513-1311OTN
DC: 102618
POWER UP
1. Insert 2 new “AAA batteries into the outdoor sensor. Observe correct polarity. The red LED will flash
when transmitting.
2. Insert 3 new “C” batteries (not included) into the clock. Observe the correct polarity.
3 After 5 minutes place sensor outside in a shaded location.
WWVB ATOMIC TIME
Page | 2
AAA
AAA
D1: Transmission Indication LED
D2: Outdoor Temperature
D3: Battery Compartment
D4: Wall Mount Hole
D5: “RESET” button
D6: °C/°F” button
D7: Stand
IMPORTANT: When the clock is searching for the WWVB Atomic Time signal, the buttons will not work.
To use the buttons simply hold the button to stop the clock from searching. Buttons will now - °C/°F
work.
• Hold the - °C/°F button to start or stop a manual search for the WWVB Atomic Time signal.
• WWVB Tower Icon will flash when searching.
For information about WWVB Atomic Time visit: http://bit.ly/AtomicTime
SETTINGS
• Hold the MODE/SET button to enter the setting mode.
• Press the + or – buttons to adjust a value.
• Press the MODE/SET button to confirm adjustment and move to the next item.
Setting order:
1. Hour
2. Minutes
3. Seconds
4. Year
5. Month/Date format (M/D or D/M)
6. Month
7. Date
8. DST indicator
Note: Weekday will set automatically when Year. Month and Date are set.
Note: The clock will default back to time display if no buttons are pressed for 30 seconds.
FAHRENHEIT | CELSIUS TEMPERATURE DISPLAY
12/24 HOUR & TIME ZONE SELECTION
• Press the + 12/24 button to select 12 hour or 24 hour time format. Default is 12 hour time.
• Hold the +12/24 button to select the time zone.
• Time zones:
PacificP
M Mountain
C E Central
E Eastern
• Press the - °C/°F button to change the temperature display from Fahrenheit to Celsius.
Page | 3
TIME ALARM
1. Press the MODE/SET button to view alarm time. The letters AL will replace the seconds.
2. Hold the MODE/SET button and the Hour will flash.
3. Use the + or - buttons to adjust the hour.
4. Press the MODE/SET button to confirm and move to the minutes. Minutes will flash.
5. Use the + or - buttons to adjust the minutes. Press the MODE/SET button to confirm and exit.

Termékspecifikációk

Márka: La Crosse Technology
Kategória: óra
Modell: 513-1311OTN

Szüksége van segítségre?

Ha segítségre van szüksége La Crosse Technology 513-1311OTN, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók óra La Crosse Technology

Útmutatók óra

Legújabb útmutatók óra