Használati útmutató Konig IR-URC34

Konig távirányító IR-URC34

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Konig IR-URC34 (44 oldal) a távirányító kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/44
1
IR-URC33 +
IR-URC34
MANUAL (p. 2)
Universal Remote Control
MODE D’EMPLOI (p. 8)
Télécommande universelle
MANUALE (p. 16)
Telecomando universale
BRUKSANVISNING (s. 29)
Universal fjärrkontroll
MANUAL DE UTILIZARE (p. 36)
Telecomandă universală
HASZNÁLATI ÚTMUTATÓ (o. 23.)
Egyetemes távirányító
KÄYTTÖOHJE (s. 26)
Universaali kaukosäädin
GEBRUIKSAANWIJZING (p. 12)
Universele Afstandsbediening
ANLEITUNG (s. 5)
Universal-Fernbedienung
MANUAL DE USO (p. 19)
Mando a distancia universal
NÁVOD K POUŽITÍ (s. 33)
Univerzální dálkové ovládání
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 39)
Γενικό Τηλεχειριστήριο
2
ENGLISH
Operation:
The 4/8-in-1 universal remote control is suitable for all TV sets (TV), DVD
players (DVD), digital and analogue satellite receivers and cable receivers
(CBL/SAT), video recorders (VCR), tuners (TUNER), CD players (CD), cassette
recorders (TAPE), ampliers and other audio devices (AMP) from common
manufacturers. The universal remote control can execute almost all basic device
functions.
Button description
Some button functions may be different for different models.
SET - For setting the remote.
TV, VCR, CBL/SAT, CD, DVD, TUNER, TAPE, AMP – Device button
Power – On and Off
0-9 - Number buttons for selecting channels or entering the device code during
setup.
AV/TV - TV/Video button on your TV remote control or the TV/SAT button on
your SAT remote control or A/B in cable and CD mode.
Menu - Menu or OSD (On-Screen Display) or memory.
CH + /- - Channel up and down
VOL +/- - Volume up and down
Mute – Mute the sound
(fast reverse)REW
► PLAY (operate your DVD, CD etc)
(fast forward)FFWD
(Record)REC
(terminate your operation)STOP
PAUSE
Red, Green, Yellow Blue and for TV Teletext.
Television video
TV and text mixed
Teletext mode
Page hold
Displays info on the selected channel
Up, Down, Left, Right, OK, Exit -- Functions like the UP, DOWN, LEFT, RIGHT,
OK, EXIT, menu functions.
Setup
Make sure that fresh batteries have been inserted correctly into the remote
control.
To make your remote control ready for use, you need to carry out one of the
following steps:
A. Setup by Brand Code
1. Switch on the device for which you wish to use the remote control.
2. Find the code number of your device brand in the code list from the
respective device group.
3. Press the SET button and the device button at the same time.
Release the two buttons as soon as LED lights up.
4. Enter the 3-digit device code within 10 seconds. If no entry within 10
seconds, the setup mode is automatically terminated.
5. The LED turns off if the code has been accepted by the remote control. If
the LED ashes twice, that means the code may be wrong, and the remote
control remains in setup mode, enter the correct code from the list again in
good time.
6. Check the function of the buttons on remote control. If it does not function
correctly, try another 3-digit device code (e.g. 010…) from the list under the
3
same brand. Repeat the steps 3 to 6 until all the basic functions operate
correctly.
Note: Exit the setup mode by pressing the device button, or the setup mode is
automatically terminated if no button is pressed for 10 seconds.
B. Setup by Automatic Search
1. Switch on the device that you like to control. If it is a VCR insert a cassette.
2. Point the remote control at the device. Simultaneously press the SET and
Device buttons for three seconds. The LED should start ashing, that means
it is in Automatic Search now.
3. The OFF signal is automatically transmitted from the remote control to the
device (code scan). As soon as the device switches off, immediately press
any key (except SET key) to stop the Automatic Search.
4. Switch on the device again by pressing the “POWER” key. Check the
function of the other buttons on the remote control. If none of the buttons
function (i.e. the search cannot be stopped at the correct time) or the majority
of the buttons do not function correctly, restart the search (see steps 2 to 4)
to nd a suitable code. If the majority of the buttons function correctly, setup
has been successful. Re-press the device button to save the code and to
terminate the setup mode.
Note: To automatically terminate the search, press any button (except the SET
button). The LED turns off and the search is terminated.
C. Setup by Manual Search
1. Switch on the device that you like to control. (If it is a VCR, please insert a
cassette).
2. Point the remote control at the device. Press and hold down the set button
and then press the device button. (For less than 3 seconds, otherwise Auto
search is started) Then release the two buttons.
3. The LED lights up and the remote is in setup mode.
4. Press the Power button (On/Off button) approx. every 1.5 seconds. (If
the device you are searching for is a VCR, DVD player, CD player, Tuner,
cassette recorder, etc., you can also press the play button.) The LED light
should start ashing, i.e. the device is in Manual Search Mode.
5. As soon as the device you are searching for switches off (or is reactive),
check whether the other buttons on the remote control function correctly (do
not press Power button, or else it will move to next code). If the majority of
the buttons does not function correctly, press the button approx. every 1.5
seconds to initiate the reactive code (manual search is continued, see steps
4 to 5). If the majority of the buttons on the remote control functions correctly,
save the code by pressing the Device button to terminate the manual search.
Note: The Manual Search is automatically terminated if no entry occurs during a
30 seconds period.
D. Setup by learning function
The learning function is used to extend the pre-programmed codes. A fully
functional original remote control is required for learning programming.
1. Press down and hold the Learn button and press the device (e.g. DVD) that
you want to learn-in, then release both pressed keys. The LED starts ashing
and then the remote control is in learning mode for DVD codes.
2. Press and release the target button which you want to learn in(e.g. POWER),
the LED lights up.
3. Point the original remote control to the receiver LED (the same as transmitter
LED). Ensure that both remotes are approx. 30mm apart and facing each
other.
4. Press and hold the source button on your original remote control until the
LED ashes 2 times and lights up for 2 seconds, and then ashes again. If
an error occurs, the LED ashes four times, lights up for two seconds and
then ashes again.
5. Repeat Step 2 to 4 to learn in more buttons.

Termékspecifikációk

Márka: Konig
Kategória: távirányító
Modell: IR-URC34

Szüksége van segítségre?

Ha segítségre van szüksége Konig IR-URC34, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók távirányító Konig

Konig

Konig KN-WLHDMI20 Útmutató

15 Szeptember 2024
Konig

Konig SAS-ASRC300 Útmutató

11 Szeptember 2024
Konig

Konig SEC-ARC10 Útmutató

8 Szeptember 2024
Konig

Konig KN-RCU10B Útmutató

4 Augusztus 2024
Konig

Konig KN-SMARTPRO10 Útmutató

2 Augusztus 2024
Konig

Konig IR-URC30 Útmutató

28 Július 2024
Konig

Konig IR-URC32 Útmutató

24 Július 2024
Konig

Konig KN-RCU80B Útmutató

23 Július 2024
Konig

Konig KN-RCU40B Útmutató

22 Július 2024
Konig

Konig KN-URC10B Útmutató

21 Július 2024

Útmutatók távirányító

Legújabb útmutatók távirányító

Conrad

Conrad src 9200 Útmutató

3 Április 2025
Hama

Hama 40095 - 5in1 Útmutató

2 Április 2025
Hama

Hama 20312 - Easytip S9 Útmutató

1 Április 2025
Hama

Hama 20320 - Zapman 4in1 Útmutató

31 Március 2025
Sonos

Sonos Controller for iPhone Útmutató

29 Március 2025
Universal Remote Control

Universal Remote Control UR4U Útmutató

29 Március 2025
ELV

ELV SRC-7000 Útmutató

27 Március 2025
Metronic

Metronic ZAP 2 - 495383 Útmutató

27 Március 2025
Metronic

Metronic 495405z Útmutató

27 Március 2025
Autel

Autel Smart Controller SE Útmutató

27 Március 2025