Használati útmutató Konig HAV-PR22

Konig rádió HAV-PR22

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Konig HAV-PR22 (56 oldal) a rádió kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/56
HAV-PR22
MANUAL (p. 2 )
World Receiver
ANLEITUNG (s. 5 )
Weltempfänger
MODE D’EMPLOI (p. 9 )
World Receiver
GEBRUIKSAANWIJZING (p. 13)
Wereldontvanger
MANUALE (p. 17 )
World Receiver
MANUAL DE USO (p. 21 )
Receptor mundial
HASZNÁLATI ÚTMUTATÓ (o. 25.)
Világvevő
KÄYTTÖOHJE (s. 29 )
Maailmanradio
BRUKSANVISNING (s. 32 )
World Receiver
NÁVOD K POUŽITÍ (s. 36 )
Světový přijímač
MANUAL DE UTILIZARE (p. 40 )
Receptor universal
ΕΓΧΕΙΡΙ∆ΙΟ XPHΣ ΣH (σελ. 44 )
Φορητό Ραδιόφωνο με παγκόσμιο δέκτη
BRUGERVEJLEDNING (p. 48 )
World Radiomodtager
VEILEDNING (p. 52 )
Verdensmottaker
2
ENGLISH
World Receiver
AM/FM/SW Digital Tuning Radio with Built-in Mono Speaker
1. Telescopic antenna
2. Light button
3. LCD
4. Stand (the rear of the radio)
5. Power on button
6. Carrying strap
7. Sleep/snooze button
8. Tuning up/hour set
9. Volume +/- control
10. Tuning down/min set
11. Lock switch
12. Preset 0......9
13. Meter button
14. Enter button
15. Band/wake button
16. Mode button
17. Time/set/memory
18. Reset (in battery compartment)
19. 9k/10k selector (in battery compartment)
20. Battery compartment
21. DC IN jack
22. Earphone jack
23. Ext. Ant. jack
24. Volume indicator
SLEEP FM.ST LOCK
ALARM
BAND
Battery Caution
Memory Function
Memory Address
Frequency Unit
Frequency / Time
POWER SOURCE
BATTERY OPERATION
1. Open the battery compartment.
2. Correctly Insert 3 “AA” size batteries.
To prevent possible damage make sure you
Insert batteries according to the indicated polarity
Do not apply heat to the batteries
3
Remove the batteries if you are not going to use the radio for a long time
Remove empty batteries immediately
Do not use old and new batteries together
TO USE AC ADAPTER
Connect the plug to the radio and the schuko plug to an AC wall outlet. The DC input is 4.5 V
outer + inner -.
CLOCK FUNCTION
1. To set the time press the “POWER” button to go into standby mode.
2. Press “TIME/SET/MEMORY” and use the “HOUR/+” and “MIN/-” to set the correct time.
3. After you are finished press the “TIME/SET/MEMORY BUTTON” again to save the settings.
4. Press “MODE” to view the time on the display.
RADIO OPERATION
1. Move the lock switch to the UP position.
2. Turn on the radio with the “POWER BUTTON”.
3. Adjust the volume with the “VOLUME +/-” button.
4. Select the desired band using the “BAND/WAKE” button.
5. Tune to the desired station using the “HOUR/+” or “MIN/-” buttons. The frequency is displayed on
the display.
6. To improve reception, move the antenna.
7. To switch off the radio use the “POWER BUTTON”.
HEADPHONE
If you want to listen via a headphone, lower the volume, connect the headphone and set the volume to
the desired level again.
NOTE: When the received signal is weak, or the batteries are low, the FM ST indicator may not show
up on the display, even though the sound can still be heard via the headphones.
AUTOMATIC TUNING
To automatically tune to the desired station press and hold “HOUR/+” or “MIN/-” for more than 2
seconds. The radio will then search for the next available station. For SW press the “METER” button
repeatedly to select a station.
DIRECT TUNING
To directly input the desired frequency, press the “ENTER” button and type in the frequency of the
desired station. Press “ENTER” to confirm.
PRESETS
This radio is able to store 40 preset stations, with a maximum of 10 on each band. When you are
listening to the station you want to store, follow these steps:
1. Press “TIME/SET/MEMORY”, MEMO will blink in the display.
2. Press a preset number (0-9).
3. Press the “TIME /SET/MEMORY” button again and the station will be stored.
NOTE: Storing a station needs to be completed in succession without any pauses.
To select a stored preset station, first select the desired band and then press the numerical key which
corresponds with the stored station.
ALARM SETTINGS
TO SET THE ALARM
1. Switch to standby mode.
2. Press the “BAND/WAKE” button repeatedly to select the desired alarm (OFF, BUZZ, RADIO).
3. Hold the “BAND/WAKE” button until the time starts flashing.
4. Set the desired alarm time using “HOUR/+” or “MIN/-” and press “BAND/WAKE” to confirm.

Termékspecifikációk

Márka: Konig
Kategória: rádió
Modell: HAV-PR22

Szüksége van segítségre?

Ha segítségre van szüksége Konig HAV-PR22, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók rádió Konig

Konig

Konig HAV-IR20 Útmutató

18 Szeptember 2024
Konig

Konig HAV-TR1100 Útmutató

10 Szeptember 2024
Konig

Konig HAV-PR40 Útmutató

10 Szeptember 2024
Konig

Konig SAS-DVRSG11 Útmutató

1 Szeptember 2024
Konig

Konig HAV-DABR100BU Útmutató

30 Augusztus 2024
Konig

Konig HAV-TR710PI Útmutató

6 Augusztus 2024
Konig

Konig HAV-SR42 Útmutató

4 Augusztus 2024
Konig

Konig HAV-TR710BR Útmutató

3 Augusztus 2024
Konig

Konig HAV-TR200BL Útmutató

1 Augusztus 2024
Konig

Konig HAV-TR710BL Útmutató

1 Augusztus 2024

Útmutatók rádió

Legújabb útmutatók rádió

Denver

Denver CRQ-110 Útmutató

2 Április 2025
Muse

Muse MF-060 VB Útmutató

1 Április 2025
Muse

Muse MF-060 AG Útmutató

1 Április 2025
Difrnce

Difrnce DBB300 Útmutató

31 Március 2025
RoadKing

RoadKing 56 Útmutató

29 Március 2025
Bush

Bush DS982 Útmutató

26 Március 2025
DeWalt

DeWalt DCA2203C Útmutató

25 Március 2025
Albrecht

Albrecht DR-330 Útmutató

16 Január 2025
Thomson

Thomson WKR60BT Útmutató

14 Január 2025