Használati útmutató Konig CSBTTRNSM100

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Konig CSBTTRNSM100 (81 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/81
CSBTTRNSM100
MANUAL (p. 2)
ANLEITUNG (S. 5)
MODE D’EMPLOI (p. 8)
GEBRUIKSAANWIJZING (p. 11)
MANUALE (p. 14)
MANUAL DE USO (p. 17)
MANUAL (p. 20)
HASZNÁLATI ÚTMUTATÓ (o. 23)
KÄYTTÖOHJE (s. 26)
BRUKSANVISNING (s. 29)
NÁVOD K POUŽITÍ (s. 32)
MANUAL DE UTILIZARE (p. 35)
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 38)
BRUGERVEJLEDNING (s. 41)
VEILEDNING (s. 44)
ИНСТРУКЦИЯ (47 стр.)
KILAVUZ (s. 50)
KASUTUSJUHEND (lk. 53)
NÁVOD (s. 56)
ROKASGRĀMATA (lpp. 59)
NAUDOJIMO VADOVAS (62 p.)
PRIRUČNIK (str. 65)
РЪКОВОДСТВО (p. 68)
INSTRUKCJA OBSŁUGI (str. 71)
PRIROČNIK (str. 74)
Audio transmitter with Bluetooth® Wireless Technology for headphones
ENGLISH
2
Product view
Pairing button
USB power connector
Audio input for TV or audio device
Setup
1. Connect the 3.5mm connector to the CSBTTRNSM100.
2. Connect the other 3.5mm connector to the headphone output of a TV or
audio device.
3. Connect the USB connector to the USB port of the TV or audio device (or
connect the USB connector to a USB power adapter)
Operation
Connect the rst set of headphones or music receiver:
1. Take your Bluetooth® headphones or Bluetooth® music receiver.
2. Press the pairing button (check the device manual).
ENGLISH
3
3. After being connected for the rst time, the two devices will recognise each
other next time.
Connect the second set of headphones or music receiver:
1. Take the second set of Bluetooth® headphones or Bluetooth® music
receiver.
2. Press the pairing button (check the device manual).
3. Press the pairing button on the CSBTTRNSM100 once for approx.
1~2seconds. The LED light starts blinking while the transmitter searches
for the second set of headphones or music receiver. The device that was
connected rst, is muted.
4. If the devices are connected, the LED light is constantly switched on.
Note
The CSBTTRNSM100 features the option to connect two Bluetooth® A2DP
devices at the same time. If you would like to connect a second A2DP device,
you need to reset the CSBTTRNSM100 to establish a new connection.
Reset
Press the pairing button on the CSBTTRNSM100 and release it again. The LED
light on the CSBTTRNSM100 starts blinking while the transmitter is searching
for A2DP devices nearby.
LED indication
Indication Meaning Description
Flash every 5seconds Pairing Searching for a device in pairing mode
Constantly switched on Connected CSBTTRNSM100 and device are
connected
Troubleshooting
If you do not hear any sound coming from your headphones or music receiver,
check the following:
- make sure the CSBTTRNSM100 is powered;
- make sure the audio cable is correctly connected to the CSBTTRNSM100;
- make sure that the audio source is working properly;
- make sure the volume of the audio source is set correctly;
- make sure your device is at a maximum distance of 10metres of the audio
transmitter.

Termékspecifikációk

Márka: Konig
Kategória: nincs kategorizálva
Modell: CSBTTRNSM100

Szüksége van segítségre?

Ha segítségre van szüksége Konig CSBTTRNSM100, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Konig

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva