Használati útmutató Kogan KAM236TMSFA

Kogan hűtőszekrény KAM236TMSFA

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kogan KAM236TMSFA (24 oldal) a hűtőszekrény kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/24
236L TOP MOUNT FRIDGE
( ) KAM236TMSFA & KAM236TMSFB
2
Safety & Warnings 3
Overview 7
Installation 9
Operation 15
Functions 16
Cleaning & Care 18
Troubleshooting 21
Notes 23
3
Thank you for buying this Kogan product. Please read all safety instructions before using
t . his refrigerator
Warning:
Warning: Risk of fire / flammable materials
THIS appliance is intended to be used in household and similar applications such as staff
kitchen areas in shops, offices and other working environments; farm houses and by clients
in hotels, motels and other residential type environments; bed and breakfast type
environments; catering and similar nonretail applications.
THIS appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.) Children should be supervised to ensure that they do not play with the
appliance.
IF the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
DO NOT store explosive substances such as aerosol cans with a flammable propellant in
this appliance.
THE must appliance be unplugged after use and before carrying out user maintenance on
the appliance.
WARNING: -Keep ventilation openings, in the appliance enclosure or in the built in structure,
clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
SAFETY & WARNINGS
WARNING: Before using this product, read this user guide carefully and
keep it for future reference. The design and specifications are subject to
change without prior notice for product improvement.
6
2. The fact that effervescent drinks should not be stored in food freezer
compartments or cabinets or in low- temperature compartments or cabinets and
that some products such as water ices should not be consumed too cold;
3. The need to not exceed the storage time(s) recommended by the food
manufacturers for any kind of food and particularly for commercially quick-frozen
food in food- - freezer and frozen food storage compartments or cabinets;
4. The precautions necessary to prevent an undue rise in the temperature of the
frozen food while defrosting the refrigerating appliance, such as wrapping the
frozen food in several layers of newspaper.
5. The fact that a rise in temperature of the frozen food during manual defrosting,
maintenance or cleaning could shorten the storage life.
6. The necessity that, for doors or lids fitted with locks and keys, the keys be kept out
of the reach of children and not in the vicinity of the refrigerating appliance, in
order to prevent children from being locked inside.
Meaning : of safety warning symbols
Prohibition s ymbol
This is a prohibition symbol. Any incompliance with
instructions marked with this symbol may result in damage to
the product or endanger the personal safety of the user.
Warning s ymbol
This is a warning symbol. It is required to operate in strict
observance of instructions marked with this symbol; or
otherwise damage to the product or personal injury may be
caused.
Caution s ymbol
This is a cautioning symbol. Instructions marked with this
symbol require special caution. Insufficient caution may result
in slight or moderate injury or damage to the product.
This user guide contains important safety information which shall be observed by the users.
11
1. Ensure the appliance is powered off before conducting this operation. Remove all
food from door shelves.
2. Remove hole cap, the upper hinge cover, fitting crews of upper hinge and sleevs e
pipe, then light up the freezer door until it is separated from cabinet completely
Upper
hinge cover
Screw
Upper hinge
Hole Cover
12
3. Unscrew the middle hinge screws, remove the middle hinge and remove the two-
hole plug, a screw, a screw cap on the middle beam, then remove the refrigerator
door.
4. Remove the adjusting feet, lower hinge screw and lower hinge assembly, then
install the lower hinge assembly on the other side of the box and install the
adjusting feet on the side of the adjusting feet opening.
Middle hinge
Screw
Hole plug
Screw
Screw cap
Lower hinge
assembly
Adjusting feet
Screw
16
A Setting button LED 3 Temp 3 (M -l ) id ow
LED 1 Temp 1 (Cold) LED 4 Temp 4 (Coldest)
LED 2 Temp 2 (M -id high) LED 5 Super cool mode
Temperature setting
Every time you press After 15 . Setting button, the mode changes once seconds if no
further changes have been made, the refrigerator will run according to the setting value.
Mode adjustment press cycle ( ” b mode): Setting utton to cycle to next
FUNCTIONS
SETTING
COLD COLDEST
SUPER
COOL
Notes:
The images above are only for reference and the actual product may differ.
A 1 2 4 3 5
Temp 1 Temp 2 Temp 3 Temp 4 Super
Cold
17
Display
When the refrigerator is on power, the display screen all LED light for 3 seconds, the default
temperature is Temp 3 (mid- . low)
When there is a failure, the LED light shows the fault code (loop display), the LED light
displays as following table:
Error code Error description
LED 4 + 5 flashing Temperature sensor failure of refrigerating chamber
LED 3 + 5 flashing Defrost temperature sensor failure of freezing chamber
LED 2 + 5 flashing The ambient temperature sensor failure
Memory unction f
The refrigerator can keep memory of following running status when power off.
Damper slider
The initial position of the damper adjusting slider is on the far right- side.
For better user experience, it is recommended to push the slider to right position and press
the Setting button to Temp 3 position. If it is not enough cool inside the refrigerator
compartment, check the slider to ensure the position is set correctly.
Colder fridge
Colder freezer
18
Overall cleaning
Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the
cooling effect and energy saving.
Check the door gasket regularly to make sure there are no debris. Clean the door
gasket with a soft cloth dampened with soapy water or diluted detergent.
The interior of the refrigerator should be cleaned regularly to avoid odour.
Turn off the power before cleaning interior, remove all foods, drinks, shelves, drawers,
etc.
Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons
of baking soda and a quart of warm water. Then rinse with water and wipe clean. After
cleaning, open the door and let it dry naturally before turning on the power.
For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps
or corners), it is recommended to wipe them regularly with a soft rag, soft brush, etc.
and when necessary, combined with some auxiliary tools (such as thin sticks) to ensure
no contaminants or bacterial accumulation in these areas.
Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause
odours in the interior of the refrigerator or contaminated food.
Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy
water or diluted detergent. Dry with a soft cloth or dry naturally. Wipe the outer surface
of the refrigerator with a soft cloth dampened with soapy water, detergent, etc., and
Wipe the outer surface of the refrigerator with a soft cloth dampened with soap water,
detergent, etc. and then wipe dry.
Do not use hard brushes, clean steel balls, wire brushes,
abrasives (such as toothpastes), organic solvents (such as
alcohol, acetone, banana oil, etc.), boiling water, acid or
alkaline items, which may damage the fridge surface and
interior. Boiling water and organic solvents such as benzene
may deform or damage plastic parts.
Do not rinse directly with water or other liquids during
cleaning to avoid short circuits or affect electrical insulation
after immersion.
CLEANING & CARE
19
Cleaning the glass shelf
L ift the front of glass shelf and then pull out;
Remove the glass shelf and clean as needed;
The reverse operation is for installation of glass shelf
Defrosting
The refrigerator is made based on the air-cooling principle and thus has automatic
defrosting function. Frost formed due to change of season or temperature may also be
manually removed by disconnection of the appliance from power supply or by wiping
with a dry towel.
WARNING: Ensure refrigerator luggedis unp defrost during ing
and cleaning.
20
Out of operation
Power failure: In case of power failure, even if it is in summer, foods inside the appliance
can be kept for several hours; during the power failure, the times of door opening shall
be reduced and no more fresh food shall be put into the appliance.
Long-time -non use: The appliance shall be unplugged and then cleaned; then the
doors are left open to prevent odour.
Moving: Before the refrigerator is moved, take all objects inside out, fix the glass
partitions, vegetable holder, freezing chamber drawers etc. with tape and tighten the
levell ing feet; close the doors and fix them with tape.
During moving, the appliance shall not be laid upside down or horizontally or be
vibrated; the inclination during movement shall be no more than 45°.
WARNING: The appliance shall run continuously once it is started.
Generally, the operation of the appliance shall not be interrupted;
otherwise the service life may be impaired.
22
Water pan
overflows
There is too much food in the chamber or food stored
contains too much water, resulting in heavy defrosting.
The doors are not closed properly, resulting in frosting due to
entry of air and increased water due to defrosting.
Hot housing
Heat dissipation of the built-in condenser via the housing,
which is normal.
When housing becomes hot due to high ambient
temperature and storage of too much food, it is
recommended to provide sound ventilation to facilitate heat
dissipation.
Surface
condensation
Condensation on the exterior surface and door seals of the
refrigerator is normal when the ambient humidity is too high. Wipe
the condensate with a clean towel.
Abnormal noises
Buzz: The compressor may produce buzzes during operation
and the buzzes are loud particularly upon start or stop. This is
normal.
Creak: Refrigerant flowing inside of the appliance may
produce creak, which is normal.
C ontact help.kogan.com for further assistance.
Disposal
This marking indicates that this appliance should not be disposed with
other household wastes. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.

Termékspecifikációk

Márka: Kogan
Kategória: hűtőszekrény
Modell: KAM236TMSFA

Szüksége van segítségre?

Ha segítségre van szüksége Kogan KAM236TMSFA, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hűtőszekrény Kogan

Útmutatók hűtőszekrény

Legújabb útmutatók hűtőszekrény