Használati útmutató Kodak ScanMate i940

Kodak Scanner ScanMate i940

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kodak ScanMate i940 (60 oldal) a Scanner kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/60
Safety
User precautions
Do not install the scanner in a location subject to dust, humidity or steam. This
may cause electrical shock or fire.
Make sure the electrical power outlet is located within 1.52 meters (5 feet) of
the scanner and is easily accessible.
Be sure the power adapter is securely plugged into the wall outlet.
Use only the AC adapter that is supplied with the scanner.
Leave sufficient space around the power outlet so it can be easily unplugged in
case of an emergency.
Do not use the scanner if it becomes inordinately hot, has a strange odor, emits
smoke, or makes unfamiliar noises. Immediately stop the scanner and
disconnect the power adapter from the power outlet. Contact Kodak Alaris
Service.
Do not disassemble or modify the scanner or the AC power adapter.
Do not move the scanner with the power adapter and USB cable attached. This
may cause damage to the adapter/cable. Remove the power adapter from the
wall outlet before moving the scanner.
Material Safety Data Sheets (MSDS) for chemical products are available on the
Kodak Alaris website at: www.kodakalaris.com/go/msds. When accessing the
MSDSs from the website, you will be required to provide the catalog number or
keyword of the consumable you want the Material Safety Data Sheet for. See
the section entitled, “Supplies and consumables” later in this guide for supplies
and catalog numbers.

Termékspecifikációk

Márka: Kodak
Kategória: Scanner
Modell: ScanMate i940

Szüksége van segítségre?

Ha segítségre van szüksége Kodak ScanMate i940, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Scanner Kodak

Útmutatók Scanner

Legújabb útmutatók Scanner