Használati útmutató Klipsch iFi

Klipsch hangszóró iFi

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Klipsch iFi (6 oldal) a hangszóró kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/6
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with
the manufacturer's instructions.
8. DO NOT install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding
type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wider blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where the pparay exit from the a tus.
11. ONLY USE attachments/accessories specified by the
manufacturer.
12. bracket, or table specified USE only with a cart, stand, tripod,
by the manufacturer, tus. When a cart is or sold with the appara
used, cart/apparause caution when moving the tus
combina void injurtion to a y from tip-over.
13. UNPLUG this a tus during lightning storms or when unused ppara
for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is
required when the appara ged in any watus has been dama y,
such as power-suppl ged, y cord or plug is dama liquid has been
spilled or objects have fallen into the a tus, tus ppara the appara
has been exposed to rain or moisture, te does not opera
normally, or has been dropped.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
To reduce the risk of fire or electrical shock, do not expose this
product to rain or moisture. The product must not be exposed to
dripping and splashing and no object filled with liquids - such as a
vase of flowers - should be placed on the product.
No naked flame sources - such as candles - should be placed on the
product.
WARNING: The AC main plug should be located such that it remains
readily operable by the user.
WARNING: Voltages in this equipment are hazardous to life. No
user-serviceable parts inside. Refer all servicing to qualified
service personnel.
CAUTION: Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate this device.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
ABOUT YOUR KLIPSCH MANUAL
Thank you for your purchase of the Klipsch iFi
™Speaker System.
After reading this manual and connecting your system, you will
hear the result of over 55 years of stringent engineering and class-
leading research and development. Like all Klipsch products, your
system features Klipsch horn-loaded technology – the guiding
design for the first Klipschorn
®developed in 1946 and for every
product that has followed. Horn loading allows your speakers to
deliver high-sensitivity, low distortion, flat frequency response and
wide dispersion, which translate to unequaled power, detail and
dynamics, the hallmarks of the “Klipsch Sound.” Please be sure
to fill out the enclosed warranty card or register online at
www.klipsch.com so we are better able to serve you. Again, thank
you for allowing Klipsch to bring life to your music and movies for
many years.
PACKAGE CONTENTS
Two RSX-3 satellite speakers
One 8-inch long-throw
subwoofer with slotted port
One iFi control dock
Five dock adapters
Two pairs 6-foot speaker cables
One radio-frequency (RF)
handheld remote control
One AC po wer cord
iFi SPEAKER SYSTEM
SYSTEM SETUP
Control Dock
The iFi system comes with five adapters that allow different model
iPods to work with the control dock. Each adapter is labeled to
identify the “size” iPod it is meant to fit. Depending on the age of
your iPod, the model that you have may not correspond to the size
as listed on the bottom of the adapters. The guide below will help
in choosing the appropriate insert for your particular model of iPod.
Choose the adapter that matches your iPod and insert it into the
top of the dock until it is snugly in place with the slot centered over
the multipin docking connector.
Your iPod should now fit easily but securely into the top of the dock
with the multipin connector at the base of the slot sliding into the
socket along the iPod’s bottom edge. The iFi dock will flex slightly
to relieve stress on the connector when you insert your iPod.
To avoid damage, do not apply excessive force when inserting
the iPod.
All iPod functions are available when it is in the iFi dock.
Basic System Connections
The control dock and the two satellite speakers connect to the
amplifier on the rear of the subwoofer which powers the
entire system.
• Turn the Power switch on the subwoofer’s back panel Off and
unplug the AC power cord.
• The control dock has an attached cable. Connect the end of
that cable to the matching jack on the subwoofer.
• Use the supplied twin-conductor speaker cables to connect
the satellite speakers to the binding-post output terminals on
the subwoofer’s back panel. Follow these directions carefully
to ensure correct operation. Loosen the nuts on the speaker
binding posts until the holes through the metal posts are
fully exposed. For each conductor, insert the bare wire at the
end through one of the binding post holes and screw the nut
on the post down finger-tight against the wire. Make
sure that no strands of bare wire touch between adjacent
black and red binding posts as this may cause amplifier
malfunction or damage. Also be sure that the conductor
attached to the black (negative) terminal on each satellite is
attached to the matching black spring clip on the subwoofer
panel and that the red (positive) terminal on each satellite is
connected to the matching red spring clip on the subwoofer
panel. Reversing these connections (black to red and red to
black) will reduce bass output and impair overall sound quality.
The dashed line on the speaker cable will help in making
a correct connection.
• Attach the female end of the power cord to the matching
socket on the subwoofer and the male end to an AC
wall outlet.
• The speakers can be used with or without their grilles
attached. The grilles are held in place by magnetic catches.
To remove a grille, pull it forward; to replace, line its edges
up with the speaker’s front panel and let it snap into position.
WARNING: Do not attempt to remove the subwoofer
grille as it is permanently attached.
40GB
40GB Touch Wheel, 40GB Click Wheel
40GB Photo, 60GB Photo
20GB
20GB Touch Wheel
MINI
First and Second Generation iPod Mini
10GB/15GB
10GB Touch Wheel, 15GB Touch Wheel
20GB Click Wheel, 30GB Photo
30GB
30GB Touch Wheel
iFi SPEAKER SYSTEM
Auxiliary Audio Input
The control dock also has a 3.5mm stereo minijack auxiliary audio
input on its back panel. It allows you to listen to an external source
(a portable CD player, for example) through the system. When a
plug is inserted in this jack, the system automatically switches to
the auxiliary input. To switch back to the iPod, disconnect the
auxiliary input.
A similar input on the subwoofer’s back panel can also be used
with an external source, but it is primarily intended to connect to
the audio output of a computer. This input is mixed with the
signal from the dock, whether from the iPod or from the
auxiliary input so that both sources are heard simultaneously.
This allows for, as an example, the sound from your computer to
be heard while music is playing from an iPod in the dock.
Subwoofer and Speaker Placement
Although you can place the components of the iFi system almost
any way that is convenient, speaker location will affect sound
quality. The subwoofer will generally perform best when placed on
the floor in a corner. A good second option is to place it 6 to 12
inches from a wall. The farther it is moved toward the middle of
the room, the lower the bass output will be.
You will get the best stereo effect with the satellite speakers
placed equidistant from the listening position. Wide separation will
tend to make the sound more spacious. If possible, avoid locating
either satellite closer than two feet from a side wall. Place them at
seated ear height. If that is not practical, adjust the stands’ ball
joints to aim the satellites up or down toward the listening position.
Stand Adjustment and Wall Mounting
The speakers attach to their stands via a ball joint that allows them
to be swiveled over a wide range.To adjust the angle, un-snap the
supplied hex wrench from underneath the base, loosen the four
screws in the clamp plate that surrounds the ball joint.Position the
speakers as desired and tighten the four clamp screws. Do not
over tighten! Each stand also incorporates an adjustable down stop
to prevent the speaker from drooping after its angle is adjusted.
You can access the head of this down stop from the bottom side
of the stand.
Also on the underside of the base are three (3) keyholes that
enable the stand to function as a wall mount. To install, follow the
instructions below:
1. Using a #2 Philips screwdriver, remove the four (4) screws
that attach the oval metal plate to the bottom the
speaker base.
2. Using the metal plate as a template, mark the screw
locations for the three (3) keyhole slots in the desired
location on the wall. The single keyhole slot must be located
at the top.
3. Screw #8 pan head wood screws (at least two inches/
51mm long) into a wood stud or dry wall anchors with a 20
pound (9 kg) or g ting. ve the screw heads reater load ra Lea
protruding from the wall surface a y 1/4" (~7mm).pproximatel
4. Make sure the small rubber feet are facing the wall and
place the oval metal plate onto the screws through the key
hole slots. Slide the metal plate down into position and
adjust the tightness of the screws for a snug fit.
5. f Remove the metal plate from the wall by sliding it up and of
the screws.
6. Remove the logo from the speaker base by compressing its
split post on the underside and rotate it 180° for
proper orientation.
7. Replace the oval metal plate onto the base of the speaker
using the four (4) screws removed in Step #1. Do
not over-tighten!
8. Remove the included hex wrench from the underside of the
speaker base. Loosen the four hex head screws on the
speaker’s ball joint assembly and rotate the base up and
behind the speaker.
9. y tighten the four ball joint screws to secure the Gentl
speaker’s position. You may need to fine-tune the speaker’s
angle after mounting it to the wall.
10. Hook the speaker base keyholes on the screw heads
protruding from the wall. Slide the base downward onto the
screws to lock the speaker in place.
11. If the speaker will be mounted over the location where the
speaker wire emerges from the wall, thread the wire through
the hole in the speaker base by removing the cosmetic plug.
12. Connect the speaker wire to the speakers binding posts.
13. Fine tune the speaker’s angle and tighten the ball socket
hex screws with the wrench. Do not over-tighten!
14. Store the hex wrench in the bottom of the base cover by
snapping it into the speaker base.

Termékspecifikációk

Márka: Klipsch
Kategória: hangszóró
Modell: iFi

Szüksége van segítségre?

Ha segítségre van szüksége Klipsch iFi, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Klipsch

Klipsch

Klipsch Synergy KSB-S1 Útmutató

3 Április 2025
Klipsch

Klipsch Synergy KSF-10.5 Útmutató

3 Április 2025
Klipsch

Klipsch kO-R1 Útmutató

3 Április 2025
Klipsch

Klipsch Synergy SB-1 Útmutató

3 Április 2025
Klipsch

Klipsch Reference RB-5 II Útmutató

3 Április 2025
Klipsch

Klipsch Contractor CS-800-R Útmutató

3 Április 2025
Klipsch

Klipsch Synergy SC-1 Útmutató

3 Április 2025
Klipsch

Klipsch Synergy SC-3 Útmutató

3 Április 2025
Klipsch

Klipsch Reference RC-3 II Útmutató

3 Április 2025
Klipsch

Klipsch Synergy SS-3 Útmutató

3 Április 2025

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Crestron

Crestron SAROS ICE4T Útmutató

7 Április 2025
Crestron

Crestron SAROS ICI6T Útmutató

7 Április 2025
Focal

Focal K2 Power M FRAK Útmutató

5 Április 2025
Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025
Turbosound

Turbosound PQ12-SB Útmutató

3 Április 2025
Trust

Trust Tytan GXT 658 Útmutató

3 Április 2025
Turbosound

Turbosound PQ15-YB Útmutató

3 Április 2025
JL Audio

JL Audio M3 Útmutató

3 Április 2025
Metra

Metra JP-1020 Útmutató

3 Április 2025
Turbosound

Turbosound PQ15-SB Útmutató

3 Április 2025