Használati útmutató Keurig K-Duo

Keurig Kávéfőző K-Duo

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Keurig K-Duo (8 oldal) a Kávéfőző kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
Get the most from your
new Keurig® brewer
Use & Care Guide
Remove packing tape from brewer
and plug into an outlet.
Single Cup - Place a large mug
(12oz minimum) on the drip tray.
Carafe - Rinse the carafe and
place it on the heating plate.
Remove the water reservoir lid, then lift
the reservoir straight up to remove it.
If you have a Keurig
®
Water Filter,
install it now. Refer to your Water Filter
Starter Kit for instructions.
Fill the reservoir with fresh water to the
MAX fill line.
Replace water reservoir, making sure
the lock tabs engage with the brewer.
Press the POWER button.
Use the H/M buttons to set
the clock, then press the
blinking buttonBREW to
confirm the time.
NOTE: The clock must be set in order to use
the Auto Brew functionality.
1
3
5
2
Before You Brew
Do not fill the filter basket
with coffee grounds. Press
the button - the CARAFE
4 brew size buttons will
blink, press the 8 button.
The brew indicator light
will blink. Press the BREW
button to start the
cleansing brew.
The button CARAFE
will illuminate red to
indicate the heating
plate is on when the
cleansing brew
is complete. Press and
hold the CARAFE button
to turn the heating plate
off, and pour the hot
water into the sink.
Plug & Place Rinse & Fill
Power On & Set Clock
Press the POD button -
the 4 brew size buttons
will blink. Do not insert
a K-Cup® pod. Press the
8 button - the brew
indicator light will blink.
Press the BREW button
to start the cleansing
brew.
The cleansing brew will
begin once the brewer
is heated. The initial
heating process will take
about 4 minutes. The
brew indicator light will pulse slowly on and off while the
brewer is heating, and the light will turn solid once the brew
begins.
The brew is complete when the brew indicator light is no
longer illuminated. Pour the hot water into
the sink.
NOTE: Between brew cycles, the brewer may take about a minute to reheat
4Cleansing Brew - Single Cup
Cleansing Brew - Carafe
12
10
8
6
AUTO
STRO NG
H M
O Z
10:30
ADD TERWA
D EESCAL
CUPS PM
12
10
8
6
AUTO
STRONG
H M
OZ
10:30
ADD TEWA R
DESCALE
CUPSP M
108
6
AUT O
10:30
STRONG
H M
1
2
BREW
BUTTON
3
12
108
6
AUT O
10:30
STRONG
H M
12
1
8
6
AUTO
H M
OZ
10:30
ADD TERWA
D EESCAL
CUPS PM
8
12
8
6
AUTO
H M
10:30
ADD TERWA
D EESCAL
CUPSPM
8
HEATING
PLATE ON
Place a mug on the drip tray. If
using a travel mug, remove the
drip tray and place the mug on the
drip tray base. Lift the handle and
place a K-Cup® pod in the K-Cup®
pod holder. Lower the handle
completely to close the lid.
High Altitude Brewing: While
holding the brewer handle up, push
down slowly on the K-Cup® pod in
the pod holder until the bottom of
the K-Cup® pod is punctured by the
exit needle.
Press the POWER button.
The and POD CARAFE
buttons will blink. Select
POD, then select your
brew size. Press the
BREW button to initiate
brewing. For a bolder
coffee, press the STRONG
button before pressing
the button. BREW
Brewing is complete when
the brew indicator light is no longer illuminated.
We recommend using a Keurig® Rinse Pod or running a
cleansing brew immediately after brewing hot cocoa or other
sweetened pods to keep the needles clean.
NOTE:
After 5 minutes, the brewer will go into Auto Off mode.
To reactivate, press the POWER button.
1
1
2
2
Brew Your First Single Cup
Brew Your First Carafe
Press the POWER button.
The and POD CARAFE
buttons will blink. Select
CARAFE, then select
your brew size. Press the
BREW button to initiate
brewing.
Once the brew is complete,
the heating plate will
automatically turn on and
remain on for 2 hours -
the CARAFE button will
illuminate red. To turn off the heating plate, press and hold the
CARAFE button until the light is no longer illuminated.
If you accidentally shut the heating plate off, press and hold
the button until the red light illuminates to turn it CARAFE
back on.
Fill the water reservoir
to the fill line. MAX
Lift the filter basket
cover up and insert a
12 cup paper filter into
the filter basket.
Add the desired
amount of ground
coffee (1 tablespoon
of ground coffee per
cup is recommended).
Close the filter basket
cover completely and
make sure the carafe
is on the heating plate.
NOTE: The maximum capacity for regular ground coffee is 15 tablespoons and 12
tablespoons for decaf. Exceeding this amount may cause overflow.
Place Mug & Pod Brew & Enjoy!
Place Carafe & Fill Basket Brew & Enjoy!
Smart Start heats then brews in one simple process. No need
to wait for the brewer to heat before selecting brew size.
Power on your brewer, add coffee, select your brew type, then
select your brew size. Press the button. The brewer will BREW
heat, then automatically begin brewing.
Single Cup Auto Off automatically turns your brewer off 5
minutes after the last brew for energy savings.
Carafe Auto Off automatically turns your heating plate off 2
hours after the last brew for energy savings.
Auto Brew programs the carafe to brew at a specific time up
to 24 hours in advance.
Strong Brew increases your coffee strength and intensity for a
single cup. For bolder coffee, press the button.STRONG
High Altitude To ensure your brewer works properly at higher
altitudes (5,000 feet), enable the High Altitude setting by
pressing and holding the and POD CARAFE button for 3
seconds. When enabled, a mountain icon will appear on
the display screen.
Brewer Features
12
108
6
AUTO
10:30
STRONG
HM
3BREW
BUTTON
5
2
(OPTIONAL)
4
1
12
108
6
AUTO
10:30
STRONG
H M
3BREW
BUTTON
4
2
1
Pause & Pour a cup mid-brew while brewing a carafe using
the 20 second automatic pause feature.
NOTE: Removing the carafe for more than 20 seconds may cause the filter basket to
overflow.
Auto Brew Instructions
Fill the water reservoir to MAX fill line and load the paper
filter and coffee grounds.
1. buttonsPress the button. Use the AUTO H/M to set the
time for auto brew to begin, press the blinking BREW
button to confirm the time.
2. Choose your brew size, then press the blinking BREW
button to confirm the size.
The AUTO brew setup is now complete.
A clock icon will appear on the screen and the AUTO button will
be illuminated to signal AUTO is on.
Note: Once AUTO brew is enabled, you will only be able to brew a single cup. To disable
AUTO brew, press the AUTO button once. The clock icon will disappear from the screen.
12
10
8
6
AUTO
STRONG
H M
OZ
10:30
ADD TERWA
D EESCAL
CUPSP M

Termékspecifikációk

Márka: Keurig
Kategória: Kávéfőző
Modell: K-Duo

Szüksége van segítségre?

Ha segítségre van szüksége Keurig K-Duo, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Kávéfőző Keurig

Keurig

Keurig K-Cup 2.0 Brewer K350 Útmutató

12 Január 2025
Keurig

Keurig K-Mini Go Útmutató

31 Augusztus 2024
Keurig

Keurig K•Café Útmutató

28 Augusztus 2024
Keurig

Keurig K-10 Mini Plus Brewer Útmutató

24 Augusztus 2024
Keurig

Keurig Vue V 1200 Útmutató

24 Augusztus 2024
Keurig

Keurig 2.0 K450 Brewer Útmutató

24 Augusztus 2024
Keurig

Keurig Vue V 700 Útmutató

24 Augusztus 2024
Keurig

Keurig K-45 Elite Brewer Útmutató

24 Augusztus 2024
Keurig

Keurig Vue V 500 Útmutató

24 Augusztus 2024
Keurig

Keurig K-Cup K45 Elite Brewer Útmutató

16 Augusztus 2024

Útmutatók Kávéfőző

Legújabb útmutatók Kávéfőző

Bravilor Bonamat

Bravilor Bonamat RLX 131 Útmutató

7 Április 2025
Aroma

Aroma AEM-108 Útmutató

7 Április 2025
Cloer

Cloer 5021 Útmutató

6 Április 2025
Electra

Electra Micro Casa Útmutató

5 Április 2025
Bodum

Bodum 1928-18 Útmutató

4 Április 2025
Jura

Jura IMPRESSA XJ9 Professional Útmutató

2 Április 2025
Gerlach

Gerlach GL 4411 Útmutató

2 Április 2025
Harper

Harper HCM702 Útmutató

2 Április 2025
ProfiCook

ProfiCook KA 1137 Útmutató

1 Április 2025
AEG

AEG KF5110 Útmutató

1 Április 2025