Használati útmutató Kathrein HDZ 66 Skew

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kathrein HDZ 66 Skew (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
1 / 2
Installation kit for the BAS 66 and BAS 66 Skew planar
antenna
Installation to the BAS 66 and BAS 66 Skew LNB ca-
sing with just a few movements of the hand
Easy alignment of the antenna in conjunction with the
UFS 940/UFS 946/CAP-Konverter
Display of target elevation and actual elevation in the
receiver menu/control unit HDS 50/CAPcontrol app
Elevation can also be displayed with the skew set
Display of the adjusted skew in the control unit
HDS 50/app CAPcontrol
No additional wiring between antenna and receiver/
CAP converter
Elevation indicator
for the BAS 66 and BAS 66 Skew planar antenna
Features
The device described is exclusively for installation in a BAS 66 or BAS 66 Skew planar antenna.
Any other use, or failure to comply with these instructions, will result in voiding of warranty cover.
During installation, comply with the safety instructions in the BAS 66 or BAS 66 Skew user instructions
and the installation instructions. If you no longer have the respective documentation at hand,
you can download the latest version of the documentation from the Internet
(https://www.kathrein-ds.com/support/downloadbereich/).
Installation and safety instructions
Installation
Undo the two knurled screws and take o the LNB
protective cover
Now disconnect the coaxial cables und from the  
LNB connection
Guide frame HDZ 66 Skew
HDZ 66 Skew 204500002
NEIGU SMESSERNG
HDZ 66 Skew
204500002
LNB
950-2150MHz
14/18V
max. 400mA
CAP-Konverter/TV
Place the inclinometer as shown on the right, into the
guide frame of the fl at antenna
Fix the inclinometer using the supplied bracket and
screws
Connect the F-type connector of cable to the
remaining socket of the LNB (upper socket, torque 3.4)
Refit the LNB protective cover and secure it with the
twoknurled screws.
Connect the inclinometer HDZ 66 Skew (connection:
“LNB”) to one end of the supplied coaxial cable and
the other end to the lower F-Type connector of the LNB
(max torque 3.4 Nm)
With the cable marked (of the appropriate HDZ 66
Skew receiver) make a loop in the cable under the LNB
and screw on the HDZ 66 Skew (connection: “CAP-Kon-
verter/TV”) (max torque 3.4 Nm)
Electronic equipment
Electronic equipment is not domestic waste – in accordance with directive 2012/19/EC OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL dated 04th July 2012 concerning used electrical and electronic appliances,
it must be dis- posed of properly. At the end of its service life, take this unit for disposal at a designated pub-
lic collection point.
www.kathrein-ds.com 936500022/a/STM/0220/GB Ι Subject to change. Ι support@kathrein-ds.com
KATHREIN Digital Systems GmbH Ι Anton-Kathrein-Str. 1 3 Ι 83022 Rosenheim Ι Germany Ι Phone +49 731 270 909 70

Termékspecifikációk

Márka: Kathrein
Kategória: nincs kategorizálva
Modell: HDZ 66 Skew

Szüksége van segítségre?

Ha segítségre van szüksége Kathrein HDZ 66 Skew, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Kathrein

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025