Használati útmutató Jung MAGCR1112

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Jung MAGCR1112 (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/5
Multimedia connection system
- MA.. Ref. no.:
Stand: Sep-19
Operating Instructions
Multimedia connection system
1. Safety instructions
Electrical equipment must only be installed and assembled by
qualied electricians.
Always follow the relevant accident prevention regulations.
Failure to comply with these instructions may ult in damage to res
the device, re or othe hazards. r
Proper signal transmission is only ensured when the appropriate
accessories are used and the specied maximum cable lengths are
observed, as well as the minimum permissible distance of 0.3 m
from current-carrying cables and sources of interference (electronic
ballasts, dimmers, ESLs, etc.) are observed.
These operating instructions are an integral component of the
product, and must be retained by the end user.
2. Function
The multimedia connection system serve to connect input and output
devices for transmission of audio/ video signals and data.
The available functions depend on the devices that are
connected. To select the suitable socket, note the information
from the manufacturer of the connected devices.
Intended use
Only suitable for use in indoor areas
Can be used in multiple combinations
Flush-mounting in wall box according to DIN VDE 0606
Connection of audio/video devices via „Plug & Play“
3. ration Ope
CAUTION!
The use of non-standardised connecting cables and connectors can
cause device malfunctions.
The devices may be destroyed.
Use only approved connecting cables and connectors.
Multimedia connection system
- .: MA.. Ref. no
2
3.1. Connecting multimedia devices
Insert connector of the connecting cable from the signal source,
e.g. from a DVD or MP3 player, into the jack of multimedia socket.
sert connector of the connecting cable from a playback device, In
e.g. from an LCD/plasma television or stereo system, into the jack
of a second multimedia socket.
Insert connectors into the jacks straight and without using force.
Twisting or tilting the connector may deform the contacts.
Application examples
Connection
Devices
Cinch
Audio systems, AV receivers, active loudspeakers
S-Video
SAT receivers, televisions, projectors, iPod
docking stations, video cameras
USB
iPods, printers, storage media, digital cameras
TRS
3.5 mm
MP3 players, CD/DVD players, sound cards,
audio systems
VGA
PCs/laptops, projectors, monitors
HDMI
High denition plasma/LCD televisions, SAT
receivers, projectors, game consoles, DVD/Bluray
players, DVD/HDD recorders, video cameras
Information for electricians
4. Assembly
4.1. Connecting and installing the multimedia connection
system
The connecting cable has been laid, the wall box is installed in the wall.
Recommendation: use Kaiser „Electronics Box“ (Art. no. 1068-02
or 9062-74) in order to maintain the permissible bending radii.
Insert connector of the connecting cable into the corresponding jack
on the rear of the multimedia connection system.
Screw insert to the wall box in the tight orientation via the
supporting ring.
Place centre plate into the frame.
Mount centre plate together with the frame on the insert using
screwless terminals.
The multimedia connection system can be commissioned.
5. Commissioning
CAUTION!
Short- rcuit if devices that are switched on are connected. ci
Devices may be destroyed.
Switch all devices o before connecting them.
Multimedia connection system
- .: MA.. Ref. no
3
5.1. Carrying out a functional test
Multimedia connection system is connected.
Activate the desired functions and check the signal transmission at
the signal sources and the playback device, e.g. play a DVD and
check picture/sound reproduction on a television set.
The multimedia connection system is ready for operation.
6. Appendix
6.1. Technical data
Cinch Audio
Rated voltage: DC 50 V
Frequency ranges: 20 Hz ... 20 kHz
Contact resistance: ≤ 20 mΩ
Insulation resistance: ≥ 100
Electric strength: AC 500 V~ (50/60 Hz)
for 1 min 2 mA
Insertion and removal forces: 3 ... 25 N
Insertion cycles: ≥ 1000
Gender changer: white (left) red (right) ,
Contact material: gold-plated
Installation depth: 14 mm
Ambient temperature: -5 ... +45 °C
TRS 3.5 mm
Rated voltage: DC 50 V
Frequency ranges: 20 Hz ... 20 kHz
Contact resistance: ≤ 20 mΩ
Insulation resistance: ≥ 100
Electric strength: AC 500 ... 2000 V~
DC 800 V
Insertion and removal forces: 4.9 ... 14.7 N
Insertion cycles: ≥ 2000
Gender changer: 3.5 mm Audio Stereo, 180 °
Contact material: gold-plated
Ambient temperature: -5 ... +45 °C
Composite Video
Rated voltage: DC 50 V
Frequency ranges: ≤ 160 MHz
Contact resistance: ≤ 20 mΩ
Insulation resistance: ≥ 100
Electric strength: AC 500 V~ (50/60 Hz)
for 1 min 2 mA
Insertion and removal forces: 3 ... 25 N
Insertion cycles: ≥ 1000
Gender changer: yellow
Contact material: gold-plated
Installation depth: 14 mm
Ambient temperature: -5 ... +45 °C

Termékspecifikációk

Márka: Jung
Kategória: nincs kategorizálva
Modell: MAGCR1112

Szüksége van segítségre?

Ha segítségre van szüksége Jung MAGCR1112, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Jung

Jung

Jung AL5232F Útmutató

8 Október 2024
Jung

Jung SL5232MS Útmutató

7 Október 2024
Jung

Jung A1751B Útmutató

7 Október 2024
Jung

Jung IPZ1000REG Útmutató

7 Október 2024
Jung

Jung A5232MSAL Útmutató

4 Október 2024
Jung

Jung MALS1082 Útmutató

3 Október 2024
Jung

Jung GCR1561.07F Útmutató

29 Szeptember 2024
Jung

Jung LS5232T3LG Útmutató

28 Szeptember 2024
Jung

Jung ME5232MS Útmutató

27 Szeptember 2024
Jung

Jung CD5232MS Útmutató

23 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva