Használati útmutató Juki PLC-2760NVM

Juki varrógép PLC-2760NVM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Juki PLC-2760NVM (42 oldal) a varrógép kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/42
PLC-2760NVM
INSTRUCTION MANUAL
CONTENTS
1. Specications ................................................................................................................. 1
2. Threading the machine head ......................................................................................... 2
3. Take-up thread guide ..................................................................................................... 3
4. Pneumatic components (when the pneumatic center guide is used) ....................... 4
5. Setting the incidental device ......................................................................................... 6
5-1. Setting the ON/OFF status of the center guide ................................................... 6
5-2. Setting the optional input for the the center guide ............................................. 8
5-3. Setting the optional output for the center guide ................................................ 9
6. Adjusting the hook needle guard ................................................................................ 10
7. Adjusting the bobbin case opening lever .................................................................. 10
8. Adjusting the timing of the opener ............................................................................. 11
9. How to correct the main shaft reference angle ......................................................... 12
10. Position of the thread trimmer cam .......................................................................... 14
11. Adjusting the position of the moving knife .............................................................. 15
12. Adjusting the position of the clamp spring ............................................................. 16
13. 17 How to adjust the cam timing ....................................................................................
13-1. 17 Timing of the vertical feed cam ........................................................................
13-2. Top feed cam timing .......................................................................................... 18
14. 20 Needle sway (Adjusting the bottom feed amount) ..................................................
15. Tension correction ..................................................................................................... 21
15-1. Tension correction and sewing speed ............................................................. 22
15-2. Tension correction and remaining amount of bobbin thread ........................ 23
16. Thread clamp device .................................................................................................. 25
16-1. How to install the thread clamp device ............................................................ 25
16-2. How to set up the thread clamp device ............................................................ 28
16-3.
How to set the thread clamp operation while the presser foot is in its upper
position.................................................................................................................... 31
17. How to replace the hook cover ................................................................................. 32
18. How to install the oil lter .......................................................................................... 34
19. 35 Counter function .........................................................................................................
19-1. 35 Displaying the sewing screen under the counter display mode ...................
19-2. Types of the counter .......................................................................................... 35
19-3. 36How to set the counter ......................................................................................
19-4. 40How to reset the count-completion state .........................................................
CAUTION
This Instruction Manual for the PLC-2760NVM only describes their differences from the
standard models (PLC-2760V).
For safety-related information, carefully read and fully understand "Safety precautions"
described in the Instruction Manual for the standard models before using your sewing ma-
chine.
– 1 –
1. Specications
PLC-2760NVMA70BBZ
No. Item Application
1 Model PLC-2760NVM
2 Model name 2-needle, post-bed, unison-feed, lockstitch machine with vertical-axis hook
3 Application Medium- to heavy-weight materials, car seat, furniture
4 Sewing speed Max. 2,500 sti/min
(Refer to "10. SEWING SPEED TABLE" in the Instruction Manual for the standard
model.)
5 Needle Ferd. SCHMETZ 134 - 35 (Nm 100 to Nm 180) (Standard : Nm 140)
6 Applicable thread size for sewing #30 to #5 (Europe 60 / 3-20 / 3)
7 Applicable thread size to be cut #30 to #5 (Europe 60 / 3-20 / 3)
8 Stitch length Max. 12 mm (forward/reverse feed)
However, the machine is shipped with its stitch length restricted to 7 mm.
9 Presser foot lift 20 mm
10 Presser foot pressure control Electric control (driven by a pulse motor)
11 Horizontal feed control Electric control (driven by a pulse motor)
12 Alternate vertical feed control Electric control (driven by a pulse motor)
13 Reverse stitch adjusting method Pulse motor driving (with touch-back switch)
14 Number of patterns Sewing pattern ............................ 99 patterns (For the polygonal shape sewing, as
many as 10 patterns can be registered.)
Cycle sewing pattern 9 patterns ...................
Custom-pitch pattern 20 patterns ...................
Condensation custom pattern 9 patterns .....
15 Thread take-up Link thread take-up
16 Needle bar stroke 40 mm
17 Amount of the alternate vertical
movement
MAX. 9 mm
However, the machine is shipped with its stitch length restricted to 6.5 mm.
18 Needle thread tension Electric control (driven by a solenoid)
19 Hook Vertical-axis 1.6-fold hook (Latch type)
20 Feed mechanism Box feed
21 Driv e syst em/Top a nd b otto m
vertical axis drive
Main shaft direct drive system/Timing belt
22 Lubrication Automatic lubrication by semi-dry head plunger pump (with oil gauge)
23 Lubricating oil JUKI New Defrix Oil No. 1 (equivalent to ISO standard VG7)
or JUKI MACHINE OIL No. 7
24 Bed size 643 mm × 178 mm
25 Space under the arm 347 mm × 298 mm
26 Hand wheel size Outer diameter : ø123 mm
27 Motor/Control box DD motor : 800W AC servomotor
Control box : SC-952
28 Machine head weight 88 kg
29 Rated power consumption 600 VA
30 Noise - Equivalent continuous emission sound pressure level (L
pA) at the
workstation:
A-weighted value of 83.5 dB; (Includes K
pA = 2.5 dB); according to ISO
10821- C.6.2 - ISO 11204 GR2 at 2,500 sti/min.
- Sound power level (L
WA);
A-weighted value of 90.5 dB; (Includes K
WA = 2.5 dB); according to ISO
10821- C.6.2 - ISO 3744 GR2 at 2,500 sti/min.

Termékspecifikációk

Márka: Juki
Kategória: varrógép
Modell: PLC-2760NVM

Szüksége van segítségre?

Ha segítségre van szüksége Juki PLC-2760NVM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók varrógép Juki

Juki

Juki MS-1190 Útmutató

12 Január 2025
Juki

Juki LK-1903BN Útmutató

31 December 2025
Juki

Juki MH-380 Útmutató

31 December 2025
Juki

Juki MH-382 Útmutató

31 December 2025
Juki

Juki LU-1509N Útmutató

14 Október 2024
Juki

Juki HZL-30Z Útmutató

5 Október 2024
Juki

Juki DSC-244 Útmutató

2 Október 2024
Juki

Juki S161 Útmutató

27 Szeptember 2024
Juki

Juki L121 Útmutató

18 Szeptember 2024
Juki

Juki AK141 Útmutató

17 Szeptember 2024

Útmutatók varrógép

Legújabb útmutatók varrógép

Pfaff

Pfaff 463H Útmutató

15 Január 2025
Elna

Elna Lotus ZZ Útmutató

14 Január 2025
Brother

Brother Aveneer EV1-LE Útmutató

14 Január 2025
Brother

Brother Aveneer EV1 Útmutató

14 Január 2025
Necchi

Necchi Maximatic 586 Útmutató

13 Január 2025
Pfaff

Pfaff 295-1 Útmutató

12 Január 2025
Brother

Brother Innov-is NV-180 Útmutató

12 Január 2025
Baby Lock

Baby Lock Imagine 2 Útmutató

12 Január 2025
Alfa

Alfa 1412 Útmutató

12 Január 2025
Baby Lock

Baby Lock Ellure - BLR Útmutató

12 Január 2025