Használati útmutató Juki AK-154

Juki varrógép AK-154

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Juki AK-154 (9 oldal) a varrógép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/9
INSTRUCTION MANUAL
AK-154
i
CONTENTS
1. FEATURES 1 ..............................................................................................
2. INSTALLATION 2 .......................................................................................
3. HOW TO SELECT THE FUNCTION OF AUTO-LIFTER 5 .......................
4. OTHERS (Advanced edition) 6 ................................................................
4-1.
Function for reducing the presser foot pressure at the beginning of sewing
....6
4-2. Presser foot lifting height setting function in the case the sewing machine
stops with its needle-bar up. 7 ................................................................................
4-3. Presser operating speed changing function 7 ......................................................
This is the auto-lifter incorporating the cam which is driven by the stepping motor.
After the presser foot is lifted by the auto-lifter, it is retained at its upper position by the cam. As a
result, the power consumption is reduced.
Since this auto-lifter does not produce solenoid-like impact noise, the comfortable work environment
is maintained.
Function for reducing the presser foot pressure at the beginning of sewing
If the needle thread is not properly drawn down under the material fabric while the thread presser
(NB device) is used, the assist function for reducing the presser foot pressure at the beginning of
sewing to help the needle thread to be smoothly drawn under the material fabric can be enabled.
* The AK device operates with the factory-set value by turning it ON.
Presser-foot lifting height setting function
The lifting height of the presser foot can be set in two different stages. When the back part of pedal
is depressed during sewing, the thread trimmer trims thread, then the presser foot automatically
goes up to its 1st lifting height.
When the back part of pedal is strongly depressed while the sewing machine is at rest or after the
completion of thread trimming, the presser foot goes up to its 2nd lifting height.
Factory-set amount of lift of the
presser foot at the time of shipment
Features
1st lifting height of presser foot 5.0 mm 0.1 to 8.5 mm
2nd lifting height of presser foot 8.5 mm 8.5 to 13.5 mm
1. FEATURES
Presser operating speed changing function
For reducing the operating noise or further reducing the material damage by the presser foot when
it is lowered to contact the material, the presser operating speed can be changed appropriately.
– 1 –

Termékspecifikációk

Márka: Juki
Kategória: varrógép
Modell: AK-154

Szüksége van segítségre?

Ha segítségre van szüksége Juki AK-154, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók varrógép Juki

Juki

Juki MS-1190 Útmutató

12 Január 2025
Juki

Juki LK-1903BN Útmutató

31 December 2025
Juki

Juki MH-380 Útmutató

31 December 2025
Juki

Juki MH-382 Útmutató

31 December 2025
Juki

Juki LU-1509N Útmutató

14 Október 2024
Juki

Juki HZL-30Z Útmutató

5 Október 2024
Juki

Juki DSC-244 Útmutató

2 Október 2024
Juki

Juki S161 Útmutató

27 Szeptember 2024
Juki

Juki L121 Útmutató

18 Szeptember 2024
Juki

Juki AK141 Útmutató

17 Szeptember 2024

Útmutatók varrógép

Legújabb útmutatók varrógép