Használati útmutató Joy-It SEN-HX711-05

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Joy-It SEN-HX711-05 (7 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/7
LOAD CELL
SEN-HX711
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In following, we will introduce you to what to observe while starting up
and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
For accurate measurements it is important to mount the load cell cor-
rectly.
The cell must be bolted into a solid base plate with the Integrated holes
on one side and the other side bolted to the bearing surface of your mea-
suring point.
Example setup:
2. INSTALLATION OF THE LOAD CELL
3. USE WITH THE ARDUINO
3.1 Wiring
3.2 Installation
To use the load cell, you must install a library. To do this, open your
Arduino IDE and click on:
Tools Manage libraries->
Now enter HX711 Arduino Library in the search field and install the library
HX711 Arduino Library by Bogdan Necula, Andreas Motl.
Arduino Amplifier board Load cell
5 V VCC -
GND GND -
Pin 3 SCK -
Pin 2 DT -
E+ Red
- E Black
- A Green
A+ White

Termékspecifikációk

Márka: Joy-It
Kategória: nincs kategorizálva
Modell: SEN-HX711-05

Szüksége van segítségre?

Ha segítségre van szüksége Joy-It SEN-HX711-05, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Joy-It

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva