Használati útmutató Joy-It RB-Case+19

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Joy-It RB-Case+19 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
RB-CASE+19
Transparent tower case for Raspberry Pi
1. GENERAL INFORMATION
Dear customer,
thank you for choosing our product. in the following, we will show you how
to use your product.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
This case is perfect for all maker and handicra enthusiasts because it
protects the Raspberry during experiments and test setups.
2. ASSEMBLY
First of all, you should remove the protective lm from both sides gently.
Aer that four synthetic spacers must be pinned and attached with synthetic
nuts.
Now you can apply the Raspberry Pi on the spacers and screw it tight with
four synthetic screws.
First of all, screw together the base plate (plate with wall mount) and the
spacers with threads. You should use the spacers with threads that you can
add the next plate on top of the other.
Repeat the previous steps as oen as the number of Raspberry Pis you wish
to install in the case.

Termékspecifikációk

Márka: Joy-It
Kategória: nincs kategorizálva
Modell: RB-Case+19

Szüksége van segítségre?

Ha segítségre van szüksége Joy-It RB-Case+19, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Joy-It

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva