Használati útmutató James SPL6LCR-BEQ

James hangszóró SPL6LCR-BEQ

Olvassa el alább 📖 a magyar nyelvű használati útmutatót James SPL6LCR-BEQ (2 oldal) a hangszóró kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
INSTALLATION GUIDE
Spacers have been provided to elevate
the SPL bracket high enough to clear any
protrusions on the display that my interfere
with the bracket mounting process. We
recommend using the minimal amount of
spacers required to clear any protrusion.
Determine the screw size, M6 or M8,
required to mount your wall bracket to the
display. Select either the M6 or M8
hardware bag. 3 lengths are provided,
35mm, 45mm, and 50mm. Select the
correct length to match the spacer quan-
tity (height) and then loosely mount the
brackets to the rear of the display.
45
®
SPL6 UNIVERSAL MOUNTING BRACKET
Installation guide for James Loudspeakers SPL6 SoundBar universal mounting bracket.
BRACKETS SUPPLIED HARDWARE
Part # QTY Screws
#1 28 VESA Spacers (1.25˝ x 0.125˝)
#2 4 M8-50mm Pan Head Philips Screws
4 M8-45mm Pan Head Philips screws
4 M8-35mm Pan Head Philips screws
#3 4 M6-50mm Pan Head Philips Screws
4 M6-45mm Pan Head Philips screws
4 M6-35mm Pan Head Philips screws
#4 4 UNC 1/4-20˝ Pan Head Philips Screws
4 Sealing Washers (0.625˝ x 0.275˝)
2 UNC 10-24 Flat Head
After the bracket has been inserted into the
channel of the SoundBar, slide the bracket
left to right to align them to the VESA
pattern on the rear of the display.
Place the display on a padded flat surface. Loosen screws on bracket and
pre-assembled swivel joints, so that they
can slide/pivot with little resistance.
If extra support is desired on the sliding
portion of the bracket, then use the
additional screws and washers provided.
123Before mounting the bracket to the rear
of the display, first insert the bracket into
the channel located on the rear of the
SoundBar.
Part A (Pre-Assembled)
(2) VESA rails, (2) Bracket rails,
(2) Long swivel joints (part B)
Non James TV bracket shown for illustration
6
- Slide the adjustable portion of the
holding tab into the bottom slot of
the SoundBar.
- Tighten the two screws on each of
the holding plates
A
B
James Loudspeaker | 535 Airpark Road, Napa, CA94558 | 707.265.6343 | www.JamesLoudspeaker.com
®
20180305
SPL6 UNIVERSAL MOUNTING BRACKET
Connect wires to terminals, ensuring
correct polarity, before mounting to wall.
10
Follow the manufacturer’s instruction
for the wall mount installation.
(Will require 2 or more people).
11
89
Make all final adjustments to swivel
joints and bracket tabs, make sure to
avoid stressed positions/alignments.
Lastly, tighten all screws on joints & tabs
while applying constant pressure on the
SoundBar so that it’s snug against the
display while tightening fasteners.
7
A
B
If desired, tightening the set screws
located in the bracket’s trusses will make
micro adjustment’s to the SoundBar’s tilt
angle.

Termékspecifikációk

Márka: James
Kategória: hangszóró
Modell: SPL6LCR-BEQ

Szüksége van segítségre?

Ha segítségre van szüksége James SPL6LCR-BEQ, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró James

James

James 62ow Útmutató

26 Augusztus 2024
James

James 816BE Útmutató

26 Augusztus 2024
James

James SPL8LCR-BEQ Útmutató

17 Július 2024
James

James SPL6LCR-BEQ Útmutató

17 Július 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Phonic

Phonic SAFARI 1000 LITE Útmutató

12 December 2024
Phonic

Phonic iSK 8 Deluxe Útmutató

12 December 2024
Phonic

Phonic aSK215 Útmutató

12 December 2024
Phonic

Phonic JUBI 12A LITE Útmutató

12 December 2024
Kanto

Kanto REN Útmutató

12 December 2024
Phonic

Phonic ASK15 Útmutató

12 December 2024
Phonic

Phonic ASK10 Útmutató

12 December 2024
Phonic

Phonic iSK 215 Deluxe Útmutató

12 December 2024
Phonic

Phonic ISK 12 Útmutató

12 December 2024
Phonic

Phonic iSK 10 Deluxe Útmutató

12 December 2024