Használati útmutató Invicta Bolt 31948

Invicta óra Bolt 31948

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Invicta Bolt 31948 (31 oldal) a óra kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/31
INSTRUCT ON MANUALI AND WARRANTY
THANK YOU FOR CHOOSING AN I TNVIC A TIMEPIECE
Long ago, we set out to continue Invicta’s original 1837 mission – to offer
magnificent Swiss timepieces at modest prices. In doing so, we gave birth
to a movement in the watch industry that is turning the balance of power
over to the consumer.
We hope you enjoy your new timepiece and carefully read the easy-to-use
instructions pertaining to it. By doing so, you will help give it a long life and
keep it operating at the high quality standards by which it was crafted.
These timepieces have been tested for water resistance. In order to maintain
the water resistance, be sure to always close the crown tightly after setting.
We also recommend having your timepiece checked every year by a certified
watchmaker to ensure the gaskets are in proper condition. This will help to
assure the precise operation and longevity of the piece. Please refer to our
Service Center information on our web site www.invictawatch.com.
QUARTZ, A MUTO AT
QUARTZ, A M IC, UTO AT
AN IND W MANUAL D WATCHES
A Quartz Watch is battery powered and does not require winding.
Eventually the battery will need to be replaced.
An Automatic Watch is a mechanical watch that winds itself and does
not require a battery. When worn daily, the movement of your wrist causes
the mainspring to wind progressively, eliminating the need for additional
winding. To start your automatic, you can hand wind it by rotating the
crown clockwise a number of turns while in its normal operating position
(screw down crowns will need to be unscrewed first), or by swinging it side
to side for 30 seconds. We recommend housing an automatic in a watch
winder box.
A Manual Wind Watch is a mechanical watch that does not require a
battery, but can only be wound by hand. To wind it, turn the crown clock-
wise while it is in its normal operating position until you feel resistance.
This type of watch should be wound daily.
2
W T DOES THISHA INDICATE?
Many Invicta watches are equipped with features that go beyond the
telling of time and date. These functions are displayed on what are called
subdials, indicators, counters or zones. Your watch may have one or more
of these. Knowing them will be useful when identifying which instructions
pertain to your watch.
!
PLE NOTE . ASE Since dial designs and shapes vary, not all subdials
are perfectly round, or positioned in the same place.
4
W T DOES THISHA INDICATE?
24-Hour: often called a GMT or second time zone indicator,
the hand of this counter makes a full rotation in a 24-hour
period, thereby also indicating whether it is a.m. or p.m.
I Sun/Moon display.t is often coupled with a
Sun/Moon: indicates a.m. or p.m. through the
display of the sun or moon. It is often coupled
with a 24-hour indicator.
Moonphase: this display assures near perfect
synchronization with the lunation period, and only
needs adjusting every two and a half years, should
the watch never stop in that time.
Power Reserve: found on automatic watches,
this zone displays the hours of autonomy
remaining of a movement after it has reached
its winding peak.
6
WHICH I
w w w. i nv ic t aw a t ch . c o m
8
WATCHES WITH TIME ONLY
Setting the imeT
1. Pull out the crown to position 1. The watch stops.
2. Turn the crown until the correct time appears.
3. Push the crown back into position 0. The watch will begin running again.
10
WATCHES WITH D TIME AN DATE
Setting the ime and ateT D
1. Pull out the crown to position 1. The watch stops.
2. Turn the crown until you reach the correct date.
3. Pull out the crown to position 2.
4. Turn the crown until you reach the correct time.
5. Push the crown back into position 0. The watch will begin running again.
12
WATCWATCHES WITH , D TIME DAY AN DATE
Setting the ay and ateTime, D D
1. Pull out the crown to position 1.
2. Turn the crown clockwise until you reach the correct day.
3. Turn the crown counter clockwise until you reach the correct date.
4. Pull out the crown to position 2.
5. Turn the crown until you reach the correct time.
6. Push the crown back into position 0. The watch will begin running again.
14
WATCHES WITH ALARM
Setting the ime and ateT D
1. Pull out the crown to position 1. The watch continues to run.
2. Turn the crown until yesterday’s date appears.
3. Pull out the crown to position 2. The second hand stops. The display
changes from alarm time to reference time.
4. Turn the crown until the correct date appears. Observe A PM clock M/
rhythm.
5. Continue to turn the crown until the correct time appears.
6. Push the crown back into position 0. The display changes from
reference to alarm time.
! PLE NOTE . ASE Resetting the time also requires the identical correction of
the reference time. Please refer to “setting the reference time”.
16
WATCHES WITH ALARM
Setting the imeReference T
Parallel to the current time, the reference time runs in the background: the
alarm time refers itself to this reference time. Thus, resetting the time also
requires the identical correction of the reference time.If the reference time
is not synchronized with the current time, this results in the alarm signal
being emitted at a different time than the set alarm time.
1. Pull out the crown to position 2 . The second hand stops. The display
changes from alarm time to reference time. To set your watch to the
exact
second, the crown must be pulled out when the second hand is
in position 0.
18
WATCHES WITH ALARM
Setting the Alarm
1. Press the push-button for at least 2 seconds. Until the small minute
hand jumps forward one minute and setting mode is activated.
Short pressing: Less than 1 second:
The reference time is moved forward by the minute.
Medium pressing: 1-2 seconds:
The reference time is moved forward by the hour.
Long pressing: Longer than 2 seconds:
The reference time is moved forward until the push-button is released.
2. Switch alarm O ON/ FF: Press the push-button briefly.
2 beeps: Alarm switched ON
1 beep: FFAlarm switched O
20
CHRONOGRAPHS
Built-in stopwatch feature
A chronograph is a timepiece with a built-in stopwatch feature. With few
exceptions, Invicta chronographs tell the time, date and include three
subsidiary dials. These dials are often referred to as sub-dials, indicators,
counters, eyes or zones. Typically, they measure minutes, seconds and
tenths of a second.
The sub-dials that measure minutes and tenths of a second are part of the
stopwatch feature. The sub-dial that measures 60 seconds is in a constant
rotation and is also known as the small seconds.
22
CHRONOGRAPHS
Setting the ime and ate . fterT D A a Battery Change
1. Pull out the crown to position 1. The watch continues to run.
2. Turn the crown until you reach yesterday’s date. If you are setting the
date between 9pm and 12pm, the date must be set to the following day as
dates set between these hours do not automatically change at midnight.
3. Pull out the crown to position 2. To set the time to the exact second,
it must be pulled out when the second hand is in position 0. The watch
stops.
4. Turn the crown until you reach the correct date.
5. Continue to turn the crown until you reach the correct time.
6. Push the crown back into position 0. To set the time to the exact second,
it must be pushed back into position 0 at the exact second.
24
CHRONOGRAPHS
Adjusting the Chronograph Hands to Zero Position
1. Pull out the crown to position 2. All three chronograph hands are in
their correct or incorrect zero position.
2. Keep push-button A and B depressed simultaneously for at least 2
seconds. The center stop-second rotates 360º and corrective mode is
activated.
Adjusting the center stop second
S Pingle step: ress push-button A 1 x short
C Pontinuous: ress push-button A 1 x long
26
CHRONOGRAPHS
Measuring ccumulated imeA T
1. Start: Press push-button A Start timing..
2. Stop: Press push-button A.
3. Restart: Press push-button A. Timing is resumed.
4. Stop: Press push-button A Final time is displayed. Accumulation of .
timing can be continued by pressing push-button A.
5. Reset: Press push-button B. The chronograph hands will be reset to their
zero positions.
28
CHRONOGRAPHS
Setting the imeT
1. Pull out the crown to position 2.
To set the time to the exact second, it must be pulled out when the second
hand is in position 0. The watch stops.
2. Turn the crown until you reach the correct time.
3. Push the crown back into position 0.
To set the time to the exact second, it must be pushed back into position
0 at the exact second.
30
CHRONOG
CHRONOGRAPHS WITH BIG DATE DAYAND
Invicta is one of the first companies to use the Swiss-made Startech
5050.C, the world’s first big date and day chronograph with three eyes. It
features small seconds at 3 o’clock, tenths of a second at 6 o’clock, and
30 minutes and, in some, 12 hours at 9 o’clock.
32
CHRONOG
CHRONOGRAPHS WITH BIG DATE DAYAND
Setting the Time, D Day and ate
1. Pull out the crown to position 1.
2. Turn the crown until you reach the correct date. If you change the date
between 9:00pm and 12:00pm, it must be set to the following day as
dates set between these hours do not automatically change at midnight.
3. Pull out the crown to position 2.
4. Turn the crown clockwise until you reach the correct time.
5. Turn the crown counterclockwise until you reach the correct day.
6.
Push the crown back into position 0.
The watch will begin running again.
34
CHRONOG
CHRONOGRAPHS WITH BIG DATE DAYAND
Adjusting the Chronograph Hands to Zero Position
Before using the chronograph functions, please ensure that the crown is
in position 0 and the 4 chronograph hands are precisely at zero position
following activation of push-button B. Should this not be the case, the
positions of the hands must be adjusted.
1. Pull out the crown to position 1. All three chronograph hands are in
their correct or incorrect zero position.
2. Keep push-button A and B depressed simultaneously for at least 2
seconds. The center stop-second rotates 360º and corrective mode is
activated.
Adjusting the center stop second
S Pingle step: ress push-button A 1 x short
C Pontinuous: ress push-button A 1 x long
36
CHRONOG
CHRONOGRAPHS WITH BIG DATE DAYAND
Measuring Elapsed imeT
1. Start: Press push-button A. The center sweep hand will begin measuring
seconds.
2. Stop: Press push-button A how much time has elapsed. and read
3. Reset: Press push-button B. The chronograph hands will be reset to their
zero positions.
! PLE NOTE . ASE The center sweep hand should be used only as a function
of the chronograph and should not be kept running constantly in place
of the small seconds.
38
CHRONOG
CHRONOGRAPHS WITH BIG DATE DAYAND
Measuring ccumulated imeA T
1. Start: Press push-button A. The center sweep hand will begin measuring
seconds.
2. Stop: P A Read the 3 chronograph counters.ress push-button .
3. Resume timing: Press push-button A again.
4. Stop: P A Read the 3 chronograph counters.ress push-button .
5. Repeat this process as many times as needed.
6. Reset: Press push-button B. The chronograph hands will be reset to their
zero positions.
40
CHRONOGRAP
CHRONOGRAPHS WITH DATE DAY M, AND ONTH
Setting the Time, D Date and ay
1. Pull out the crown to position 1.
2. Turn the crown until you reach the correct date. If you change the date
between 9:00pm and 12:00pm, it must be set to the following day as
dates set between these hours do not automatically change at midnight.
3. Pull out the crown to position 2.
4. Turn the crown clockwise until you reach the correct time.
5. Turn the crown counterclockwise until you reach the correct day.
6.
Push the crown back into position 0.
The watch will begin running again.
44
CHRONOGRA
CHRONOGRAPHS WITH DATE DAY M, AND ONTH
Adjusting the Chronograph Hands to Zero Position
Before using the chronograph functions, please ensure that the crown is
in position 0 and the 4 chronograph hands are precisely at zero position
following activation of push-button B. Should this not be the case, the
positions of the hands must be adjusted.
1. Pull out the crown to position 1. All three chronograph hands are in
their correct or incorrect zero position.
2. Keep push-button A and B depressed simultaneously for at least 2
seconds. The center stop-second rotates 360º and corrective mode is
activated.
Adjusting the center stop second
S Pingle step: ress push-button A 1 x short
C Pontinuous: ress push-button A 1 x long
46
CHRONOGRA
CHRONOGRAPHS WITH DATE DAY M, AND ONTH
Measuring ccumulated imeA T
1. Start: Press push-button A Start timing..
2. Stop: P A.ress push-button
3. Restart: Press push-button A. Timing is resumed.
4. Stop: P A Final time is displayed. Accumulation of ress push-button .
timing can be continued by pressing push-button A.
5. Reset: P The three chronograph hands will be reset ress push-button B.
to their zero positions.
48

Termékspecifikációk

Márka: Invicta
Kategória: óra
Modell: Bolt 31948

Szüksége van segítségre?

Ha segítségre van szüksége Invicta Bolt 31948, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók óra Invicta

Invicta

Invicta Specialty 31308 Útmutató

12 Január 2025
Invicta

Invicta Bolt 33183 Útmutató

4 Szeptember 2024
Invicta

Invicta Bolt Útmutató

4 Szeptember 2024
Invicta

Invicta Bolt 31978 Útmutató

4 Szeptember 2024
Invicta

Invicta Quartz Útmutató

23 Augusztus 2024
Invicta

Invicta Sea Hunter Útmutató

22 Augusztus 2024
Invicta

Invicta 21687 Just For Her Útmutató

22 Augusztus 2024
Invicta

Invicta Sea Spider Útmutató

22 Augusztus 2024
Invicta

Invicta Coalition Forces 26498 Útmutató

19 Augusztus 2024
Invicta

Invicta Angel 18796 Útmutató

19 Augusztus 2024

Útmutatók óra

Legújabb útmutatók óra

Casio

Casio EFR-571DB Útmutató

30 Március 2025
Citizen

Citizen Zenshin Three-hand AW0130-85A Útmutató

26 Március 2025
Citizen

Citizen Weekender BM8595-16H Útmutató

26 Március 2025
Casio

Casio Collection LTP-2069L-7A2VEF Útmutató

23 Március 2025
Casio

Casio Edifice EFS-S560DB-1AVUEF Útmutató

23 Március 2025
Casio

Casio Edifice EFR-564D-1AVUEF Útmutató

23 Március 2025
Casio

Casio EQB-700D-1AER Útmutató

23 Március 2025
Casio

Casio GA-100L-8ADR Útmutató

23 Március 2025
Casio

Casio STR300C-1V Útmutató

23 Március 2025
Casio

Casio G-Shock GA-110C-7AER Útmutató

23 Március 2025