Használati útmutató Intermec ScanPlus 1800PDF

Intermec Vonalkód olvasó ScanPlus 1800PDF

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Intermec ScanPlus 1800PDF (171 oldal) a Vonalkód olvasó kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/171
Installation Manual
ScanPlus 1800
Hand-held Scanner
P/N 0-360049-02
2
ScanPlus 1800 - Installation Manual
ScanPlus 1800 - Installation Manual - Edition 1.5 - compatible with EasySet System sp1800en.cmd - 99/07/26
The ScanPlus 1800 ST is a Class 2 Laser Scanner. Fix the laser warning labels onto the product if they are not already
present.
CAUTION - LASER LIGHT WHEN OPEN. DO NOT STARE INTO BEAM.
Regulatory Statements
Intermec hereby declares that the ScanPlus 1800 has been tested and found compliant with the below listed
standards as required by the EMC Directive 89/336/EEC as amended by 92/31/EEC and by the Low Voltage
Directive 73/23/EEC as amended by 93/68/EEC:
EN55022 (1992) EN50082-1 (1998) EN60950 (1993)
USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. It generates, uses and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it
may cause interference to radio communications. If this equipment causes interference, the user will be required to correct the
interference at the user’s own expense.
This equipment complies with the UL 1950 standard.
Canada: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
This equipment complies with the UL 1950 standard.
Cet équipement est conforme à la norme UL 1950.
Australia-New Zealand: This equipment has been tested and found to conform to the Australian EMC
framework concerning Class B digital devices, prescribed by the Australian and New-Zealander standard
AS/NZS 3548.
Mexico: Este equipo cumple con la certificatión NOM.
This equipment complies with the NOM certification.
The information contained in this document is for informational purposes only and is subject to change without notice. No part of
this document may be copied or reproduced in any manner without the prior written permission of Intermec Technologies
Corporation.
© Intermec Technologies Corporation All Rights Reserved
The word Intermec, the Intermec logo, ScanPlus and EasySet are either trademarks or registered trademarks of Intermec.
Throughout this document, trademarked names may be used. Rather than put a trademark ( or  ) symbol in every occurrence
of a trademarked name, we state that we are using the names only in an editorial fashion, and to the benefit of the trademark
owner, with no intention of infringement.
North America / Asia Pacific / Latin America
6001 36th Avenue West
PO Box 4280
Everett WA 98203-9280
Tel : +1 425 348 2600
Fax : +1 425 348 2833
U.S. service and technical support, tel: 1.800.755.5505
Canadian service and technical support, tel: 1.800.688.7043
Europe / Middle East / Africa
Sovereign House
Vastern Road
Reading RG1 8BT
England
Tel : +44 118 987 9420
Fax : +44 118 987 9416
Internet :
http://www.intermec.com
E-mail :
info@intermec.com
Support :
http://datacapture.intermec.com
N309
Contents
ScanPlus 1800 - Installation Manual
3
Contents
1. Using EasySet .............................................................................................. 9
online setup with RS-232 cable 0-364032-00 ........................................ 10
2. Reset all parameters ................................................................................... 11
3. Terminal / cash register used in your application .......................................... 13
connections.......................................................................................... 14
keyboard wedge........................................................................ 14
RS-232 ..................................................................................... 15
laser emulation .......................................................................... 16
wand emulation ......................................................................... 17
IBM 46xx cash registers............................................................. 18
OCIA cash registers................................................................... 18
predefined terminal selections .............................................................. 19
keyboard wedge........................................................................ 19
RS-232 ..................................................................................... 21
laser emulation .......................................................................... 24
wand emulation ......................................................................... 24
IBM 46xx cash registers............................................................. 26
OCIA cash registers................................................................... 27
custom interface number ...................................................................... 28
4. Data transmission settings........................................................................... 29
keyboard wedge................................................................................... 30
preamble................................................................................... 30
symbology identifier ................................................................... 31
postamble ................................................................................. 36
special keys interpretation (Code 39) ......................................... 38
special keys transmission .......................................................... 41
inter-character delay .................................................................. 43
inter-message delay .................................................................. 44

Termékspecifikációk

Márka: Intermec
Kategória: Vonalkód olvasó
Modell: ScanPlus 1800PDF

Szüksége van segítségre?

Ha segítségre van szüksége Intermec ScanPlus 1800PDF, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Vonalkód olvasó Intermec

Intermec

Intermec ScanPlus 1800 Útmutató

2 Szeptember 2024
Intermec

Intermec CN70e Útmutató

24 Augusztus 2024
Intermec

Intermec SR61B Útmutató

19 Augusztus 2024
Intermec

Intermec SR31T HP Útmutató

14 Augusztus 2024
Intermec

Intermec CN4E Útmutató

5 Augusztus 2024
Intermec

Intermec CK31 Útmutató

2 Augusztus 2024
Intermec

Intermec SR61TL Útmutató

1 Augusztus 2024
Intermec

Intermec CK70 Útmutató

31 Július 2024
Intermec

Intermec SR61T2D Útmutató

30 Július 2024
Intermec

Intermec SR61THP Útmutató

29 Július 2024

Útmutatók Vonalkód olvasó

Legújabb útmutatók Vonalkód olvasó

M3 Mobile

M3 Mobile Black Útmutató

2 Április 2025
M3 Mobile

M3 Mobile Smart Útmutató

2 Április 2025
Datalogic

Datalogic Magellan 1500i Útmutató

26 Március 2025
Zebra

Zebra LS7808 Útmutató

15 Január 2025
Hamlet

Hamlet HBCS-2D360 Útmutató

15 Január 2025
Hamlet

Hamlet HBCS2D120U Útmutató

15 Január 2025
Hamlet

Hamlet HBCS-2DUWB Útmutató

15 Január 2025
Newland

Newland NFT10 Pilot Pro Útmutató

12 Január 2025
Newland

Newland HR2180 Útmutató

12 Január 2025
Datalogic

Datalogic Magellan 8302 Útmutató

12 Január 2025