Használati útmutató IFM ZZ0057

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM ZZ0057 (7 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/7
Short instructions
Cooling water control panel
ZZ0057
701720 12 / 2018
UK
2
1 System description
7
KWST
ZZ0057
3
4
water out
12
water in
65
Mode
/Enter
Set
SP1
SP2
°F
°C
gph
gpm
m3/h
l/min
7
1 Filter Filters solids to avoid clogging / damage to the system.
2 Flow sensor Monitors and indicates the cooling water flow rate.
The setting of two switch points enables detection of:
excess flow (leakage / burst pipes / lost tips)
low flow (clogged / damaged pipes)
3 Water stop
valve
Closes the water supply to the system in case of failure and
prevents water spillage.
4 Backstop Prevents cooling water loss through the return pipe in case
of failure (broken tip / burst pipe).
3
DE
5 Regulating
valve
Regulation of the flow rate.
Adjustable in 6 steps, preset: step 3.
6 Pressure
sensor
Monitors the operating pressures, very fast response times
are attained if pressure falls (broken tips).
7 Cover Protection against mechanical damage.
2 Functions and features
Pressure Equipment Directive (PED)
The units comply with the Pressure Equipment Directive and are designed
and manufactured for group 2 fluids in accordance with the sound engineering
practice.
Use of group 1 fluids on request.
3 Setting of the flow sensor
The flow sensor monitors the flow rate in the supply pipe by means of a window
function. This is achieved by setting the output function of the two outputs:
OU1 and OU2 = Fno, window / normally open.
With this setting an acceptable range is monitored.
The flow rate depends on the water supply and the set-up of the welding tongs.
The setting of the switch-on points (SP1, SP2) and the switch-off points (rP1, rP2)
depends on the installation.
Optimum monitoring of the start up characteristics as well as processrelated flow
fluctuations during operation is possible via additional monitoring times in the
robot software.

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: ZZ0057

Szüksége van segítségre?

Ha segítségre van szüksége IFM ZZ0057, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva IFM

IFM

IFM E40581 Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025
IFM

IFM PG1704 Útmutató

9 Április 2025
IFM

IFM PE2599 Útmutató

23 Március 2025
IFM

IFM MK5312 Útmutató

23 Március 2025
IFM

IFM RU6035 Útmutató

18 Március 2025
IFM

IFM SF3210 Útmutató

18 Március 2025
IFM

IFM RU6045 Útmutató

18 Március 2025
IFM

IFM KI0200 Útmutató

18 Március 2025
IFM

IFM PT2400 Útmutató

16 Január 2025

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva