Használati útmutató IFM VSP02A

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM VSP02A (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/3
Operating instructions
Ex protection related part
Vibration sensor category I M1
VSP02A
80007503/00 06/2018
UK
2
Remarks for safe use in hazardous areas
Functions and features
Use in hazardous areas according to the classification
I M1
(Group I, category M1, apparatus for mines susceptible to firedamp).
Complies with the requirements of IEC 60079-0:2011 and IEC 60079-11:2011.
EC type examination certificate
Baseefa12ATEX0247
IEC Ex type examination certificate
IECEx BAS 12.0132
Marking (see unit or technical data sheet)
I M1
Ex ia I Ma
(-55 ºC < Ta < +90 ºC)
Certified Temperature Range
-55 °C < Ta < +90 °C
Installation / Set-up
The units must only be installed, connected and set up by qualified staff. The qualified staff
must have knowledge of types of protection, regulations and provisions for apparatus in
hazardous areas.
Check whether the classification ( "Functions and features" and marking on the unit) is
suitable for the application.
Connection only to intrinsically safe circuits which are approved with the type examination
certificate and do not exceed the following maximum values:
Ui = 28 V, Ii = 93 mA, Pi = 0.65 W
3
UK
Installation remarks / Installation
Adhere to the respective national regulations and provisions as well as the relevant
installation regulations.
Protect the units and the cables efficiently against damage.
Fix the cable directly behind the sensor mounting position.
For the connections and the electrical characteristics please see the unit marking or the
technical data sheet.
Mounting drawing
Non-hazardous area Hazardous area
2
134
+
-
1: Non-hazardous area apparatus
(diagnostic unit)
2: Isolator / Barrier Box
3: Junction box
4: VSP02A
Special conditions for safe operation
The unit must be connected to the external diagnostic unit via a certified isolated barrier.
Maintenance / Repair
The unit must not be modified nor can it be repaired. In case of a fault please contact the
manufacturer.
If required, the technical data sheets, type examination certificates and EC declarations of
conformity can be obtained from the manufacturer. Indicate the article number.

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: VSP02A

Szüksége van segítségre?

Ha segítségre van szüksége IFM VSP02A, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva IFM

IFM

IFM PE2599 Útmutató

23 Március 2025
IFM

IFM MK5312 Útmutató

23 Március 2025
IFM

IFM RU6035 Útmutató

18 Március 2025
IFM

IFM SF3210 Útmutató

18 Március 2025
IFM

IFM RU6045 Útmutató

18 Március 2025
IFM

IFM KI0200 Útmutató

18 Március 2025
IFM

IFM PT2400 Útmutató

16 Január 2025
IFM

IFM O2D532 Útmutató

16 Január 2025
IFM

IFM PA3027 Útmutató

16 Január 2025
IFM

IFM TW2001 Útmutató

14 Január 2025

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva