Használati útmutató IFM E37450

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM E37450 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
Installation instructions
Welding thermowell
E30403
E374x1
E374x0
80257707 / 00 01 / 2018
UK
ifm electronic gmbh • Friedrichstr. 1 • D 45128 Essen
http://www.ifm.com • e-mail: info@ifm.com
2
1 Welding the thermowell
The welding should only be carried out by qualified personnel.
Use materials and welding operations that are suitable for the housing material.
Use welding techniques according EHEDG requirements (Doc 9) to ensure a
good weld. In order to apply the required 3 mm radius to the inner surface a
second fillet weld is necessary.
Ensure the careful preparation of the components:
- Grind and polish the inside weld to achieve a minimum radius of 3 mm.
- Ensure the surface roughness of Ra ≤ 0.8 μm for optimised cleanability.
2 Welding operation
Apply the fixing points of the thermowell at equal distance (crosswise) with a
sufficient adhesive force.
Apply the welding seams crosswise between the fixing points.
Observe the cooling phases between the individual welding operations.
> They avoid glowing through / warping of the thermowell due to overheating.
Ensure full weld penetration to have no crevice where the weld seam is in
contact with the medium according to EHEDG requirements (Doc 9).
3 After completion of the welding process
Let the workpiece cool down.
Slightly grease the thread using a lubricating paste which is suitable and
approved for the application.
Screw the sensor into the adapter and tighten. Tightening torque: 30...50 Nm.

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: E37450

Szüksége van segítségre?

Ha segítségre van szüksége IFM E37450, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva IFM

IFM

IFM E40581 Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025
IFM

IFM PG1704 Útmutató

9 Április 2025
IFM

IFM PE2599 Útmutató

23 Március 2025
IFM

IFM MK5312 Útmutató

23 Március 2025
IFM

IFM RU6035 Útmutató

18 Március 2025
IFM

IFM SF3210 Útmutató

18 Március 2025
IFM

IFM RU6045 Útmutató

18 Március 2025
IFM

IFM KI0200 Útmutató

18 Március 2025
IFM

IFM PT2400 Útmutató

16 Január 2025

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva