Használati útmutató IFM E33341

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM E33341 (11 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/11
Installation Instructions
Universal process adapter RD52
E33341
80257514 08/2016
UK
2
C
B
A
HX XXXXXXX
Grease the sensor thread with a suitable
paste (A). The lubricating paste must
be suitable and approved for the given
application and compatible with the
elastomers used.
Place the sealing ring (B) in the groove
(C) of the sensor.
The adapter is supplied with an EPDM
O-ring. More sealing rings are available as
accessories:
FKM O-ring.
PEEK sealing ring.
Use a new adapter when changing from a
PEEK seal to O-ring sealing.
D
HX XXXXXXX
F
E
Screw the sensor (D) into the adapter
(E) until it is hand-tight. When doing
so, avoid mechanical effects on the
sealing areas, the hygienic area and the
pressure measuring cell.
Make sure that the O-ring (F) is correctly
positioned.
3
UK
G
HX XXXXXXX
Clamp the sensor and adapter into a
clamping device (G), e.g. vice, and only
tighten slightly so that the adapter is not
deformed.
Tighten the sensor using a spanner
until you can feel the end stop (this
corresponds to a maximum tightening
torque of 35 Nm). Note: Further
tightening may affect the sealing effect.
H
I
A
Grease thread and sealing (H) of the
coupling nut (I) with paste (A).
D
I
HX XXXXXXX
Slip the coupling nut (I) onto the sensor
(D).
Install the premounted unit in a universal RD52 process connection.
Tighten the coupling nut (I) at the universal RD52 process connection.

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: E33341

Szüksége van segítségre?

Ha segítségre van szüksége IFM E33341, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva IFM

IFM

IFM PE2599 Útmutató

23 Március 2025
IFM

IFM MK5312 Útmutató

23 Március 2025
IFM

IFM RU6035 Útmutató

18 Március 2025
IFM

IFM SF3210 Útmutató

18 Március 2025
IFM

IFM RU6045 Útmutató

18 Március 2025
IFM

IFM KI0200 Útmutató

18 Március 2025
IFM

IFM PT2400 Útmutató

16 Január 2025
IFM

IFM O2D532 Útmutató

16 Január 2025
IFM

IFM PA3027 Útmutató

16 Január 2025
IFM

IFM TW2001 Útmutató

14 Január 2025

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva