Használati útmutató IFM DN2002

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM DN2002 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
Technische Änderungen behalten wir uns ohne Ankündigung vor! Stand 04 / 99, Sachnr. 701369
PE
L
N
115/230V
Netzspannungs-
hler
LED 1 grün (Vout)
Vout
Vout
GND
GND
1)
1)
PE (intern)
2)
Gerät von
der Schiene
abnehmen:
Hier nach unten
ziehen!
Schnapp-
Mechanik
für DIN-
Tragschiene
Sekundär-
Seite
Primär-
Seite
Luftrichtung
Luftdurchzug nicht behindern!
Montageanleitung / Installation instructions
Power supply DN 2002
Abmessungen und Anschlußbelegung
Dimensions and connections
Geschlossenes Aluminiumgeuse; Maße in mm
Closed aluminium housing; dimensions in mm
1) Die Nippelhöhe oben und unten am Get be-
trägt zusammen 3,5mm.
2) Die PE-Schraube steht max. 3,5mm heraus und
darf von außen nicht gelöst werden.
1) The heihgt of the nipples situated on the top
and the bottom of the unit is 1.75mm each.
2) The PE screw protudes up to max. 3.5mm and
must not be unscrewed from the outside.
Anschlußklemmen:
max. 4 mm2 (starrer Draht)
max. 2,5 mm2 (Litze)
Draht min. 9mm, max. 15mm abisolieren.
Connection terminals:
max. 4 mm2 (rigid wire)
max. 2.5 mm2 (exible wires)
Strip the isolation of the wire (min. 9mm, max.
15mm).
Hinweis:
Keine Geuseschrauben ohne Rücksprache ent-
fernen, da interne Schutzleiterverbindungen ge-
löst werden könnten!
Note:
The housing srews should not be removed
without contacting the manufacturer because in-
ternal PE connections could be interrupted!
Betriebslage
DIN Tragschiene TS 35 (7,5) horizontal befestigen, Gerät auf-
schnappen; Beschriftung muß lesbar sein. Für andere Einbau-
lagen bitte Rücksprache halten.
Sicherung
Das Netzteil ist elektronisch gegen externe Kurzschlüsse abge-
sichert. Die interne Schmelzsicherung trennt bei einem Defekt
das Netzteil vom Netz. Sie ist nicht zugänglich, da vor einem
Austausch das Netzteil aus Sicherheitsgründen beim Hersteller
untersucht werden soll.
ACHTUNG
Gerät nie ohne Erdung betreiben!
Nicht öffnen, wenn Gerät unter Spannung steht -
LEBENSGEFAHR!
Nach dem Önen interne Schutzleiterverbindung wiederher-
stellen!
Lüftungsöffnungen freihalten!
Mounting position
Mount DIN rail TS 35 (7.5) horizontally, snap on the unit. The in-
scription must be legible. Please contact manufacturer for other
mounting positions.
Fuse
The power supply is electronically protected against short-
circuits. The internal fuse isolates the power supply in case of a
failure. For safety reasons the fuse is not accessible. The unit
should be checked by the manufacturer if fuse blows.
N.B.
Never operate the unit without ground connection!
Do not open when the unit is live - danger to life!
After opening the unit restore the internal PE connection!
Keep the ventilation holes free!

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: DN2002

Szüksége van segítségre?

Ha segítségre van szüksége IFM DN2002, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva IFM

IFM

IFM E40581 Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025
IFM

IFM PG1704 Útmutató

9 Április 2025
IFM

IFM PE2599 Útmutató

23 Március 2025
IFM

IFM MK5312 Útmutató

23 Március 2025
IFM

IFM RU6035 Útmutató

18 Március 2025
IFM

IFM SF3210 Útmutató

18 Március 2025
IFM

IFM RU6045 Útmutató

18 Március 2025
IFM

IFM KI0200 Útmutató

18 Március 2025
IFM

IFM PT2400 Útmutató

16 Január 2025

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva