Használati útmutató IFM AC1314

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM AC1314 (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
Installation instructions
AS-i CONTROLLERe
AC1308/AC1314
7390396 / 02 03 / 2004
UK
1 2 3 4 5
2
Contents
Function and features ���������������������������������������������������������������������� 3
Programming interface RS232C������������������������������������������������������ 3
DeviceNet interface ������������������������������������������������������������������������� 3
Installation ��������������������������������������������������������������������������������������� 3
Electrical connection������������������������������������������������������������������������ 4
Operating and indicating elements �������������������������������������������������� 4
LED indicators and pin connection �������������������������������������������������� 6
Contrast setting ������������������������������������������������������������������������������� 7
Operation ����������������������������������������������������������������������������������������� 7
Menu overview �������������������������������������������������������������������������������� 8
Menu navigation ������������������������������������������������������������������������������ 9
Scale drawing �������������������������������������������������������������������������������� 12
3
UK
Function and features
The controller• e (AC1308/AC1314) integrates one or two AS-i masters (both
in accordance with the AS-i version 2�1), a mini controller and a DeviceNet
interface
It controls the exchange of data to the sensor / actuator level•
processes the peripheral data in the integrated processor (signal •
preprocessing)
works as stand-alone controller with exchange of data to the PC (visualisation)•
communicates with the higher control level (in the gateway mode)•
Programming interface RS232C
Baud rate 4800 to 115,200 baud•
Max� distance between controllere and host: 20 m•
Potential separation from the controller• e power supply
Programming cable E70320 for connection to host required•
DeviceNet interface
Baud rate 125 k, 250 k and 500 kbit / s•
Max� distance between controller• e and host: depending on the baud rate
Potential separation from the controller• e power supply
Up to 64 controllers connected in parallel•
Pin connection: Pin 1: V-; Pin 2: CAN_L; Pin 3: Shield; Pin 4: CAN_H; Pin 5: V+•
Installation
Fix the controllere onto a 35mm rail� The protection rating of the unit is IP20,
therefore it should be mounted in a protected location (e�g� control cabinet)�
Ensure a condensation-free environment� Avoid excessive dust,
vibration and shock� The air circulation through the vents must not be
impeded�
Avoid installation in direct vicinity of frequency converters�
4
Electrical connection
Disconnect the installation from power� Connect the unit as indicated on the
terminals� Never connect the minus potentials to each other or the minus
potentials to the FE connection� Ensure an electrically safe ground connection
between AS-i controllere (terminal FE) and ground of the unit�
Supply the DeviceNet controllere with a 24 V DC voltage (20���30 V DC)�
Connection is made to the terminals +24 V and 0 V
The DeviceNet controllere has the cULus approval when supplied by a certified
class 2 source�
Examples of the power supplies available from ifm electronic gmbh:
Power supply DN2112 for applications that require the cULus approval�
Power supply DN2011 for applications that require cULus approval�no
Operating and indicating elements
Information concerning the state of the master (AC1308) / master AC1314) and
the connected system is given via three diagnostic LEDs on the controllere
LED PWR/COM lights: AS-i voltage present, at least one slave was
detected
LED PWR/COM flashes: AS-i voltage present, but no slave was detected
correctly
LED PROJ lights: Projection mode active, the configuration
monitoring is deactivated
LED PROJ flashes: Projection mode active, changeover to protected
mode not possible as a slave with the address 0
is connected
LED CONF/PF lights: Projected and current configuration do not match
LED CONF/PF flashes: Periphery fault on at least one connected slave
5
UK
DeviceNet status LEDs (Network Status)
LEDs off: DeviceNet voltage not ok
LED green lights: online, connected
LED green flashes: online, not connected
LED red lights: BUS OFF
LED red flashes: timeout error during data transmission
DeviceNet status LEDs (module status)
LEDs off: no supply voltage
LED green lights: controllere online
LED red lights: unrecoverable system error
LED red flashes: system error
6
LED indicators and pin connection
 
















   

 
 
display1:
pushbuttons2:
only AC 13143:
LED Network Status4:
LED Modul Status5:
reserved6:
reserved7:
7
UK
Contrast setting
The contrast can be directly changed by simultaneously pressing the right button
and the
-button (too bright) or the
-button (too dark)�
 
 




1
2
increase contrast1:
decrease contrast2:
Operation
To operate an AS-i system a special AS-i power supply is required� Connection is
made to the terminals AS-i + and AS-i -�
Disconnect the power supply before connecting the controllere
The AS-i system is operated ungroundedAS-i + and AS-i - are to be symmetrical
to the ground potential of the installation� Ensure a low resistance connection of
the symmetry point of the AS-i power supply (terminal shield) to the ground of the
installation

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: AC1314

Szüksége van segítségre?

Ha segítségre van szüksége IFM AC1314, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva IFM

IFM

IFM E40581 Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025
IFM

IFM PG1704 Útmutató

9 Április 2025
IFM

IFM PE2599 Útmutató

23 Március 2025
IFM

IFM MK5312 Útmutató

23 Március 2025
IFM

IFM RU6035 Útmutató

18 Március 2025
IFM

IFM SF3210 Útmutató

18 Március 2025
IFM

IFM RU6045 Útmutató

18 Március 2025
IFM

IFM KI0200 Útmutató

18 Március 2025
IFM

IFM PT2400 Útmutató

16 Január 2025

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva