Használati útmutató Icy Box IB-2213SSK

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Icy Box IB-2213SSK (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
1. Package Content
1x IB-2213SSK, 2x keys, 1x screws , 1x manual et
2. Key Features
Anvibraon Mobile Rack 2.5" HDD/SSD to 3.5" bay
For 1x 2.5" SATA I/II/III & SAS HDD/SSD -15 mm) (7
Date transfer rate up to 6 Gbit/s
Key lock & Hot Swap
Windows, Mac compable
3. Front view
1. Tray release latch
2. LED indicator
3. Lock
4. Back view
1. SATA power port (15 pin)
2. SATA data port (7 pin)
5. Installaon HDD/SSD
6 stallaon in Computer . In
Turn OFF the power to your computer and any other connected peripheral devices.
Unplug the power cord from the back of the computer and remove your computer's
cover.
Put the Mobile rack in one free 3.5" bay and x it with the screws.
Connect the SATA connector to the referring connectors on the main board.
Connect the 15 pin SATA power cable to the power supply of your PC. Replace the
computer cover and reconnect the power cord.
© Copyright 2017 by RaidSonic Technology GmbH. All Rights Reserved
The information contained in this manual is believed to be accurate and reliable. RaidSonic
Technology GmbH assumes no responsibility for any errors contained in this manual. RaidSonic
Technology GmbH reserves the right to make changes in the specicaons and/or design of the
above menoned product without prior noce. The diagrams contained in this manual may also
not fully represent the product that you are using and are there for illustraon purposes only.
RaidSonic Technology GmbH assumes no responsibility for any dierences between the product
menoned in this manual and the product you may have.
1. Verpackungsinhalt
1x IB- SSK, 1x Schraubensatz, 2x Schlüssel, 1x Handbuch 2213
2. Merkmale
Anvibraon Wechselrahmen 2,5" HDD/SSD 3,5" Einbauschacht in
Für 1x 2,5" SATA I/II/III & SAS Festplae (7-15mm)
Datenübertragungsrate bis zu 6 Gbit/s
Abschließbares Schloß & Hot Swap
Windows, Mac kompabel
3. Frontansicht
1. Entriegelungshebel
2. LED-Anzeige
3. Schloß
4. Rückansicht
1. SATA Stromverbindung (15 Pin)
2. SATA Datenverbidung (7 Pin)
5. Installaon der Festplaen
6 Einbau im Computer .
Schalten Sie Ihren Computer und alle angeschlossenen Geräte aus.
Enernen Sie das Stromkabel an der Rückseite Ihres Computers und die
Gehäuseabdeckung.
Setzen Sie das Gerät in einen freien 3,5" Einbauschacht und befesgen diesen mit
den entsprechenden Schrauben.
Verbinden Sie die SATA Kabel mit dem entsprechenden Anschluss auf dem
Mainboard.
Verbinden Sie die internen 15-Pin SATA Stromkabel mit dem Netzteil des PCs.
Schließen Sie das Computergehäuse und verbinden das Stromkabel wieder.

Termékspecifikációk

Márka: Icy Box
Kategória: nincs kategorizálva
Modell: IB-2213SSK

Szüksége van segítségre?

Ha segítségre van szüksége Icy Box IB-2213SSK, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Icy Box

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025