Használati útmutató ICOM IC-M801E

ICOM Vevő IC-M801E

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ICOM IC-M801E (80 oldal) a Vevő kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/80
MF/HF MARINE TRANSCEIVER
iM801 E
INSTRUCTION MANUAL
i
FOREWORD
Thank you for purchasing this Icom product. The IC-
M801E
MF
/
HF MARINE TRANSCEIVER
is designed and
built with Icom’s superior technology and craftsman-
ship. With proper care, this product should provide you
with years of trouble-free operation.
We want to take a couple of moments of your time to
thank you for making the IC-M801E your radio of
choice, and hope you agree with Icom’s philosophy of
“technology first.” Many hours of research and devel-
opment went into the design of your IC-M801E.
D
FEATURES
❍Standard 4
×
8
″
remote controller
❍
Built-in DSC meets ITU Class E requirement
❍12 and 24 V DC versions are available
❍PC connection capability for remote control
IMPORTANT
READ THIS INSTRUCTION MANUAL
CAREFULLY before attempting to operate the
transceiver.
SAVE THIS INSTRUCTION MANUAL. This
manual contains important safety and operating in-
structions for the IC-M801E.
EXPLICIT DEFINITIONS
RWARNING HIGH VOLTAGE! NEVER at-
tach an antenna or internal antenna connector during
transmission. This may result in an electrical shock or
burn.
RWARNING! NEVER connect the transceiver to
an AC outlet directly. This may pose a fire hazard or
result in an electric shock.
RWARNING! NEVER mount the transceiver
main unit overhead. The weight of the unit is approxi-
mately 8.5 kg, but its apparent weight will increase
several fold due to wave shocks or vibration. The unit
must be mounted on a flat hard surface only.
RNEVER connect a power source of more than
15.6 V DC or 31.2 V DC (depending on the transceiver
version). This connection could cause a fire or ruin the
transceiver.
RNEVER place the transceiver where normal oper-
ation of the ship or vehicle may be hindered or where it
could cause bodily injury.
RNEVER let metal, wire or other objects touch any
internal part or connectors on the rear panel of the
transceiver. This may result in an electric shock.
DO NOT use chemical agents such as benzine or al-
cohol when cleaning, as they can damage the trans-
ceiver surface.
During maritime mobile operation, KEEP the trans-
ceiver and handset or microphone as far away as pos-
sible (at least 1 m) from the magnetic navigation com-
pass to prevent erroneous indications.
Use Icom handset or microphones only
(supplied or op-
tional). Other manufacturer’s handset or microphones
have different pin assignments, and connection to the
IC-M801E may damage the transceiver.
AVOID using or placing the transceiver in areas with
temperatures below –15°C or above +55°C.
AVOID placing the transceiver in excessively dusty en-
vironments or in direct sunlight.
AVOID placing the transceiver against walls or putting
anything on top of the transceiver. This will obstruct
heat dissipation.
Place the unit in a secure place to avoid inadvertent
use by children.
BE CAREFUL! The transceiver main unit will become
hot when operating the transceiver continuously for
long periods.
PRECAUTIONS
WORD DEFINITION
R
R
R
R
RWARNING Personal injury, fire hazard or electric
shock may occur.
CAUTION Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No
risk or personal injury, fire or electric
shock.
Icom, Icom Inc. and the are registered trademarks of
Icom Incorporated (Japan) in the United States, the United
Kingdom, Germany, France, Spain, Russia and/or other
countries.
IBM is a registered trademark of International Business Ma-
chines.
ii
When your ship requires assistance, contact other ships and the Coast Guard by sending a distress call using dig-
ital selective calling on an emergency frequency.
IN CASE OF EMERGENCY
When immediate help is needed
qPush and hold [DISTRESS] for 5 sec. until the
short beeps become one long beep, to send the
distress call.
wAfter 8291 kHz is automatically selected (after an
acknowledgement call is received), push and hold
the PTT switch on the handset or microphone and
send the following information.
1. “MAY DAY, MAY DAY, MAY DAY.”
2. “THIS IS……………” (name of ship)
3. “LOCATED AT ……” (ship’s position)
4. Give the reason for the distress call.
5. Explain what assistance you need.
6. Give additional information:
•Ship type
•Ship length
•Ship color
•Number of people on-board
When potential problems exist
qPush [DSC] to select DSC watch mode, if neces-
sary.
wPush [MODE
SET
] to select DSC menu, rotate [CH]
to select “Geographical” then push [ENT].
eFollow the guidance displayed on the LCD (bottom
line), to set up the category, area, traffic and call-
ing frequencies with [CH], [ENT] and keypad.
rPush and hold [CALL] for 1 sec. until the short
beeps become one long beep.
tTransmit the appropriate information using voice.
• DSC equipped ships may monitor your transmission.
FOREWORD................................................i
IMPORTANT .............................................. i
EXPLICIT DEFINITIONS ........................... i
PRECAUTIONS ......................................... i
IN CASE OF EMERGENCY ......................ii
TABLE OF CONTENTS ............................ ii
QUICK REFERENCE............................. I–V
■How to set a Channel/Group .............. I
■Audio output/squelch adjustment ...... II
■Basic voice transmission and
reception ........................................... III
■Receiving a DSC............................... IV
■Transmitting a distress call................ IV
1 OPERATING RULES AND
GUIDELINES......................................... 1
2 PANEL DESCRIPTION .................... 2–7
■Controller (RC-25E) ........................... 2
■Main unit ............................................. 4
■Handset (HS-98) ............................... 5
■LCD screen ....................................... 6
3 SELECTING A CHANNEL/FREQUENCY
........................................................... 8–9
■Selecting a channel ........................... 8
4 RECEIVE AND TRANSMIT .......... 10–12
■Basic voice transmit and receive .... 10
■Function for transmit ........................ 10
■Functions for receive ....................... 11
■FSK operation ................................. 12
5 CHANNEL NAME PROGRAMMING . 13
6 DSC PREPARATION ................... 14–15
■MMSI code programming ................ 14
■Position and time programming ....... 15
7 CALL PROCEDURE .................... 16–28
■Distress call ..................................... 16
■Individual call ................................... 20
■Group call ........................................ 23
■Geographical call ............................. 24
■Semi/Auto (telephone) call .............. 26
■Test call ........................................... 28
8 WHEN RECEIVING A CALL ........ 29–36
■To receive a DSC call ...................... 29
■Received information ....................... 30
■Deleting a memory .......................... 30
■Distress call ..................................... 31
■Distress relay call ............................ 33
■Semi/Auto (telephone) call .............. 34
■Group call ........................................ 35
■Geographical area call .................... 35
■Individual call ................................... 36
9 MEMORY OPERATION ..................... 37
■Memory description ......................... 37
■Memory writing ................................ 37
■Memory reading/transmitting/deleting
......................................................... 37
10 DSC MENU OPERATION ............ 38–41
■General ............................................ 38
■ID input ............................................ 38
■Frequency input ............................... 39
■Verifying self-ID ............................... 40
■Self testing ....................................... 40
■Telephone number input .................. 40
■Memory reading/deleting ................. 41
■Printing out the DSC memory contents
......................................................... 41
11 SET MODE ................................... 42–47
■Quick set mode ............................... 42
■Initial set mode ................................ 43
12 CONNECTION AND INSTALLATION
....................................................... 48–60
■Supplied accessories ...................... 48
■Basic connections ............................49
■Advanced connections .................... 50
■Ground connection .......................... 51
■Power source .................................. 52
■Antenna ........................................... 52
■Mounting .......................................... 53
■Using the optional MB-108 .............. 55
■Using the optional MB-75 ................ 56
■Transceiver dimensions ................... 57
■Fuse replacement ............................ 58
■Connector information ..................... 59
13 FREQUENCY PROGRAMMING .. 61–62
■Frequency selection ........................ 61
■Programming a frequency ............... 62
14 SPECIFICATIONS .............................. 63
15 OPTIONS ........................................... 64
16 TEMPLATE .................................. 65–68
■Remote controller (RC-25E) ............ 65
■Speaker (SP-24E) ........................... 67
ABOUT CE ............................................. 69
TABLE OF CONTENTS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Quick Reference

Termékspecifikációk

Márka: ICOM
Kategória: Vevő
Modell: IC-M801E

Szüksége van segítségre?

Ha segítségre van szüksége ICOM IC-M801E, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Vevő ICOM

ICOM

ICOM IC-M15 Útmutató

14 Október 2024
ICOM

ICOM IC-4008E Útmutató

5 Október 2024
ICOM

ICOM AT-140 Útmutató

5 Október 2024
ICOM

ICOM IC-25H Útmutató

5 Október 2024
ICOM

ICOM IC-M120 Útmutató

29 Szeptember 2024
ICOM

ICOM IC-502A Útmutató

28 Szeptember 2024
ICOM

ICOM IC-T7H Útmutató

27 Szeptember 2024
ICOM

ICOM IC-M600E Útmutató

22 Szeptember 2024
ICOM

ICOM IC-471H Útmutató

22 Szeptember 2024
ICOM

ICOM IC-H12 Útmutató

21 Szeptember 2024

Útmutatók Vevő

Legújabb útmutatók Vevő

Yamaha

Yamaha Aventage RX-A4A Útmutató

9 Április 2025
Yamaha

Yamaha Aventage RX-A8A Útmutató

9 Április 2025
DJI

DJI D-RTK 3 Útmutató

5 Április 2025
Phonocar

Phonocar PH544 Útmutató

5 Április 2025
QSC

QSC SPA-Qf 60x2 Útmutató

2 Április 2025
Harper

Harper HDT2-5010 Útmutató

2 Április 2025
Harper

Harper HDT2-2010 Útmutató

2 Április 2025
Alpine

Alpine MRX-F65 Útmutató

31 Március 2025
Streacom

Streacom TL1 Útmutató

31 Március 2025
Pro-Ject

Pro-Ject Stereo Box DS Útmutató

30 Március 2025