Használati útmutató ICOM IC-M502A

ICOM Vevő IC-M502A

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ICOM IC-M502A (74 oldal) a Vevő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/74
INSTRUCTION MANUAL
iM502A
VHF MARINE TRANSCEIVER
FOREWORD
Thank you for purchasing this Icom product. The IC-
M502A V
HF MARINE TRANSCEIVER
is designed and built
with Icom’s state of the art technology and craftsman-
ship. With proper care, this product should provide you
with years of trouble-free operation.
We want to take a couple of moments of your time to
thank you for making the IC-M502A your radio of
choice, and hope you agree with Icom’s philosophy of
“technology first.” Many hours of research and devel-
opment went into the design of your IC-M502A.
D
FEATURES
Standard 4
″×
6
flush mount design
Built-in DSC meets RTCM SC101 require-
ment
Rugged waterproof construction
NMEA Input/Output
Optional COMMANDMIC®is connectable
Icom, Icom Inc. and the logo are registered trademarks
of Icom Incorporated (Japan) in the United states, the United
Kingdom, Germany, France, Spain, Russia and/or other coun-
tries. COMMANDMIC is a registered trademark of Icom
Incorporated (Japan) in the United states.
IMPORTANT
READ THIS INSTRUCTION MANUAL
CAREFULLY before attempting to operate the trans-
ceiver.
SAVE THIS INSTRUCTION MANUAL. This
manual contains important safety and operating in-
structions for the IC-M502A.
CLEAN THE TRANSCEIVER AND MICROPHONE
THOROUGHLY WITH FRESH WATER after exposure to
water including salt water, otherwise, the keys and
switches may become inoperable due to salt crystallization.
i
ii
IN CASE OF EMERGENCY
If your vessel requires assistance, contact other vessels and
the Coast Guard by sending a distress call on Ch 16.
Or, transmit your distress call using digital selective calling on
Ch 70.
USING CHANNEL 16
DISTRESS CALL PROCEDURE
1. “MAYDAY MAYDAY MAYDAY.”
2. “THIS IS ...............” (name of vessel)
3. Your call sign or other indication of the vessel (AND 9-
digit DSC ID if you have one).
4. “LOCATED AT ...............” (your position)
5. The nature of the distress and assistance required.
6. Any other information which might facilitate the rescue.
USING DIGITAL SELECTIVE CALLING (Ch 70)
DISTRESS CALL PROCEDURE
1. While lifting up the switch cover, push and hold
[
[DISTRESSDISTRESS]
]for 5 sec. until you hear 5 short beeps
change to one long beep.
2. Wait for an acknowledgment from a coast station.
Channel 16 is automatically selected.
3. Push and hold [
[PTT
PTT]
], then transmit the appropriate
information as at above.
NOTE
A WARNING STICKER is supplied with the transceiver.
To comply with FCC regulations, this sticker must be affixed in
such a location as to be readily seen from the operating con-
trols of the radio as in the diagram below. Make sure the cho-
sen location is clean and dry before applying the sticker. (p. 42)
EXAMPLE

Termékspecifikációk

Márka: ICOM
Kategória: Vevő
Modell: IC-M502A

Szüksége van segítségre?

Ha segítségre van szüksége ICOM IC-M502A, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Vevő ICOM

ICOM

ICOM IC-M15 Útmutató

14 Október 2024
ICOM

ICOM IC-4008E Útmutató

5 Október 2024
ICOM

ICOM AT-140 Útmutató

5 Október 2024
ICOM

ICOM IC-25H Útmutató

5 Október 2024
ICOM

ICOM IC-M120 Útmutató

29 Szeptember 2024
ICOM

ICOM IC-502A Útmutató

28 Szeptember 2024
ICOM

ICOM IC-T7H Útmutató

27 Szeptember 2024
ICOM

ICOM IC-M600E Útmutató

22 Szeptember 2024
ICOM

ICOM IC-471H Útmutató

22 Szeptember 2024
ICOM

ICOM IC-H12 Útmutató

21 Szeptember 2024

Útmutatók Vevő

Legújabb útmutatók Vevő