Használati útmutató ICOM IC-F520

ICOM Vevő IC-F520

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ICOM IC-F520 (36 oldal) a Vevő kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/36
INSTRUCTION MANUAL
iF620
UHF TRANSCEIVER
iF520
VHF TRANSCEIVER
RWARNING! NEVER connect the transceiver to an
AC outlet. This may pose a fire hazard or result in an electric
shock.
NEVER connect the transceiver to a power source of more
than 16 V DC such as a 24 V battery. This connection will
damage the transceiver.
NEVER cut the DC power cable between the DC plug and
fuse holder. If an incorrect connection is made after cutting,
the transceiver might be damaged.
NEVER place the transceiver where normal operation of
the vehicle may be hindered or where it could cause bodily
injury.
NEVER allow children to touch the transceiver.
NEVER expose the transceiver to rain, snow or any liquids.
USE the supplied microphone only. Other microphones
have different pin assignments and may damage the trans-
ceiver.
i
IMPORTANT
READ ALL INSTRUCTIONS carefully and completely
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL— This in-
struction manual contains important operating instructions for
the IC-F520
VHF TRANSCEIVER
and IC-F620
UHF TRANSCEIVER
.
EXPLICIT DEFINITIONS
WORD DEFINITION
RWARNING!
CAUTION
NOTE
Personal injury, fire hazard or electric shock
may occur.
Equipment damage may occur.
Recommended for optimum use. No risk of
personal injury, fire or electric shock.
Icom, Icom Inc. and the logo are registered trademarks of Icom Incor-
porated (Japan) in the United States, the United Kingdom, Germany, France,
Spain, Russia and/or other countries.
SmarTrunk II™ and SmarTrunk 3G™ are Trademark of SmarTrunk Systems,
Inc.
PRECAUTION
ii
DO NOT use or place the transceiver in areas with tem-
peratures below –22°F (–30°C) or above +140°F (+60°C) or,
in areas subject to direct sunlight, such as the dashboard.
AVOID operating the transceiver without running the vehi-
cle’s engine. The vehicle’s battery will quickly run out if the
transceiver is in transmission while the vehicle’s engine OFF.
AVOID placing the transceiver in excessively dusty envi-
ronments.
AVOID placing the transceiver against walls. This will ob-
struct heat dissipation.
AVOID the use of chemical agents such as benzine or al-
cohol when cleaning, as they damage the transceiver sur-
faces.
BE CAREFUL! The transceiver will become hot when
operating continuously for long periods.
For U.S.A. only
CAUTION: Changes or modifications to this transceiver, not
expressly approved by Icom Inc., could void your authority to
operate this transceiver under FCC regulations.
TABLE OF CONTENTS
IMPORTANT .................................................................................................... i
EXPLICIT DEFINITIONS ................................................................................. i
PRECAUTION ................................................................................................. i
TABLE OF CONTENTS .................................................................................. ii
1 PANEL DESCRIPTION .......................................................................... 1–7
■Front panel ............................................................................................ 1
■Function display ..................................................................................... 3
■Programmable function keys ................................................................. 4
2 OPERATION ......................................................................................... 8–10
■Turning power ON ................................................................................. 8
■Channel selection .................................................................................. 8
■Receiving and transmitting .................................................................... 9
3 BIIS OPERATION ............................................................................... 11–22
■Default setting ...................................................................................... 11
■Receiving a call .................................................................................... 11
■Transmitting a call ................................................................................ 13
■Receiving a message .......................................................................... 15
■Transmitting a status ........................................................................... 17
■Transmitting an SDM ........................................................................... 18
■Position data transmission ................................................................... 20
■Printer connection ................................................................................ 20
■PC connection ..................................................................................... 20
■Digital ANI ............................................................................................ 20
■Auto emergency transmission ............................................................. 21
■Stun function ........................................................................................ 21
■BIIS indication ...................................................................................... 21
■Horn output .......................................................................................... 21
■Priority A channel selection .................................................................. 22
4 Optional SmarTrunk OPERATION ................................................... 23–24
■SmarTrunk II™, SmarTrunk 3G™ and conventional modes ............... 23
■SmarTrunk II™ and SmarTrunk 3G™ operation ................................. 23
5 CONNECTION AND INSTALLATION ................................................ 25–30
■Rear panel description and connection ............................................... 25
■Supplied accessories ........................................................................... 26
■Mounting the transceiver ...................................................................... 27
■Optional unit installation ...................................................................... 28
■Antenna ................................................................................................ 30
■Fuse replacement ................................................................................ 30
■Cleaning .............................................................................................. 30
6 OPTIONS .................................................................................................. 31
7 SAFETY TRAINING INFORMATION ....................................................... 32

Termékspecifikációk

Márka: ICOM
Kategória: Vevő
Modell: IC-F520

Szüksége van segítségre?

Ha segítségre van szüksége ICOM IC-F520, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Vevő ICOM

ICOM

ICOM IC-M15 Útmutató

14 Október 2024
ICOM

ICOM IC-4008E Útmutató

5 Október 2024
ICOM

ICOM AT-140 Útmutató

5 Október 2024
ICOM

ICOM IC-25H Útmutató

5 Október 2024
ICOM

ICOM IC-M120 Útmutató

29 Szeptember 2024
ICOM

ICOM IC-502A Útmutató

28 Szeptember 2024
ICOM

ICOM IC-T7H Útmutató

27 Szeptember 2024
ICOM

ICOM IC-M600E Útmutató

22 Szeptember 2024
ICOM

ICOM IC-471H Útmutató

22 Szeptember 2024
ICOM

ICOM IC-H12 Útmutató

21 Szeptember 2024

Útmutatók Vevő

Legújabb útmutatók Vevő

Yamaha

Yamaha Aventage RX-A4A Útmutató

9 Április 2025
Yamaha

Yamaha Aventage RX-A8A Útmutató

9 Április 2025
DJI

DJI D-RTK 3 Útmutató

5 Április 2025
Phonocar

Phonocar PH544 Útmutató

5 Április 2025
QSC

QSC SPA-Qf 60x2 Útmutató

2 Április 2025
Harper

Harper HDT2-5010 Útmutató

2 Április 2025
Harper

Harper HDT2-2010 Útmutató

2 Április 2025
Alpine

Alpine MRX-F65 Útmutató

31 Március 2025
Streacom

Streacom TL1 Útmutató

31 Március 2025
Pro-Ject

Pro-Ject Stereo Box DS Útmutató

30 Március 2025