Használati útmutató HQ Power HQPL11010

Olvassa el alább 📖 a magyar nyelvű használati útmutatót HQ Power HQPL11010 (32 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/32
HQPL11010
HQPL11011
LED PARTY LIGHT CHAIN
LED-FEESTSLINGER
GUIRLANDE DE FÊTE À LED
CADENA DE LUZ FESTIVA
PARTY-LICHTERKETTE
LAMPKI ŚWIĄTECZNE LED
CORRENTE DE LUZ LED PARA FESTAS
USER MANUAL 2
GEBRUIKERSHANDLEIDING 6
MODE D'EMPLOI 10
MANUAL DEL USUARIO 14
BEDIENUNGSANLEITUNG 18
INSTRUKCJA OBSŁUGI 22
MANUAL DO UTILIZADOR 26
HQPL11010 - HQPL11011
V. 02 04/08/2021 2 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted
municipal waste; it should be taken to a specialized company for recycling. This device
should be returned to your distributor or to a local recycling service. Respect the local
environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing HQPower! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
Do not crimp the chain and protect it against damage.
Keep away from dust and extreme temperatures.
This splash-proof chain is suitable for indoor and outdoor use. When using outdoors, make sure to
connect the chain to a splash-proof power socket approved for outdoor use. If in any doubt, contact a
qualified electrician.
For outdoor use, do not install the chain or replace lamps during rain or other inclement weather
conditions.
The device is not waterproof. Do not submerge in water or any other liquid. Not suitable for
installation under water.
Not suitable for installation in cabinets, ceilings, or other enclosures.
3. General Guidelines
Refer to the on the last pages of this manual. Velleman® Service and Quality Warranty
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
HQPL11010 - HQPL11011
V. 02 04/08/2021 3 ©Velleman nv
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
Keep this manual for future reference.
4. Features
11 m black cable with IP44 power plug
with 20 pcs of E27 lamps:
o HQPL11010: 4 pcs each colour (red, yellow, green, blue, white)
o HQPL11011: 20 pcs warm white.
5. Installation
Inspecting the Chain Before Installation
1. Take the chain out of the box and unroll it fully.
2. Make sure that the power plug is disconnected from the power supply.
3. Check the plug, cable, insulation, lamp holders, and lamps for damage:
o Replace any damaged lamps. See for detailed instructions. Fitting or Replacing Lamps
o If you notice any other damage, do not use the chain and contact your dealer.
4. Make sure that the lamp holders are dry and clean on the inside and outside.
5. Check if the electrical connectors in the lamp holders are in the correct position. One shall be flat at
the bottom of the socket, the other shall point upwards, as shown in the image. If you find a socket
with both connectors pointing upwards, bend one down to match the other sockets.
Caution: only do this when the power is disconnected.
OK
Not OK
Fitting or Replacing Lamps
1. Make sure that the power plug is disconnected from the power supply. Do not replace lamps during
rain or other inclement weather conditions.
2. To replace a lamp, carefully unscrew the faulty lamp.
3. Fold down the rubber gasket over the lamp holder. This makes it easy to fit the lamp.
4. With the gasket folded down, screw the lamp into the lamp holder.

Termékspecifikációk

Márka: HQ Power
Kategória: nincs kategorizálva
Modell: HQPL11010

Szüksége van segítségre?

Ha segítségre van szüksége HQ Power HQPL11010, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva HQ Power

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva