Használati útmutató HP Pavilion dv6-1247et
Olvassa el alább 📖 a magyar nyelvű használati útmutatót HP Pavilion dv6-1247et (176 oldal) a laptop kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/176
HP Pavilion dv6 Entertainment PC
Maintenance and Service Guide
© Copyright 2008, 2009 Hewlett-Packard
Development Company, L.P.
ATI Mobility Radeon is a registered
trademark of Advanced Micro Devices, Inc.
Bluetooth is a trademark owned by its
proprietor and used by Hewlett-
Packard Company under license. Intel,
Celeron, Core, and Pentium are trademarks
of Intel Corporation in the U.S. and
other countries. Microsoft, Windows, and
Windows Vista are U.S. registered
trademarks of Microsoft Corporation.
SD Logo is a trademark of its proprietor.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
Third Edition: May 2009
First Edition: December 2008
Document Part Number: 505495-003
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a
hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact
the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the
AC adapter comply with the user-accessible surface temperature limits defined by the International
Standard for Safety of Information Technology Equipment (IEC 60950).
iii
iv Safety warning notice
Table of contents
1 Product description
2 External component identification
Top components ................................................................................................................................... 8
TouchPad ............................................................................................................................ 8
Lights ................................................................................................................................... 9
Buttons, speakers and fingerprint reader ........................................................................... 11
Keys ................................................................................................................................... 13
Front components .............................................................................................................................. 14
Rear component ................................................................................................................................. 15
Right-side components ....................................................................................................................... 15
Left-side components ......................................................................................................................... 16
Bottom components ........................................................................................................................... 17
Display components ........................................................................................................................... 18
Wireless antennas (select models only) ............................................................................................. 19
3 Illustrated parts catalog
Service tag ......................................................................................................................................... 20
Computer major components ............................................................................................................. 21
Display assembly components ........................................................................................................... 33
AntiGlare display assembly spare parts ............................................................................ 33
BrightView display assembly spare parts .......................................................................... 35
Plastics Kit .......................................................................................................................................... 37
Cable Kit ............................................................................................................................................. 38
Miscellaneous parts ............................................................................................................................ 39
Sequential part number listing ............................................................................................................ 40
4 Removal and replacement procedures
Preliminary replacement requirements ............................................................................................... 52
Tools required .................................................................................................................... 52
Service considerations ....................................................................................................... 52
Plastic parts ....................................................................................................... 52
Cables and connectors ..................................................................................... 53
v
Drive handling ................................................................................................... 53
Grounding guidelines ......................................................................................................... 54
Electrostatic discharge damage ........................................................................ 54
Packaging and transporting guidelines ............................................. 55
Workstation guidelines ..................................................................... 55
Equipment guidelines ....................................................................... 56
Component replacement procedures ................................................................................................. 57
Service tag ......................................................................................................................... 57
Computer feet .................................................................................................................... 58
Battery ............................................................................................................................... 59
Webcam/microphone module ............................................................................................ 60
Optical drive ....................................................................................................................... 62
Memory module ................................................................................................................. 64
TV tuner module ................................................................................................................ 66
RTC battery ....................................................................................................................... 67
Hard drive .......................................................................................................................... 69
WLAN module .................................................................................................................... 72
Switch cover and keyboard ................................................................................................ 76
Power button board ........................................................................................................... 80
Display assembly ............................................................................................................... 81
Top cover ........................................................................................................................... 91
Bluetooth module ............................................................................................................... 94
Modem module .................................................................................................................. 95
Audio/infrared board .......................................................................................................... 97
USB board ......................................................................................................................... 98
Power connector cable ...................................................................................................... 99
System board ................................................................................................................... 101
TV tuner module cable ..................................................................................................... 103
Modem module cable ...................................................................................................... 104
Fan/heat sink assembly ................................................................................................... 105
Processor ......................................................................................................................... 107
5 Setup Utility
Starting the Setup Utility ............................................................................. ....................... ............... 109
Using the Setup Utility ........................... ........................................... ................................................ 110
Changing the language of the Setup Utility ..................................................................... 110
Navigating and selecting in the Setup Utility .................................................................... 110
Displaying system information ......................................................................................... 111
Restoring default settings in the Setup Utility .................................................................. 111
Exiting the Setup Utility .................................................................................................... 111
Setup Utility menus .......................................................................................................................... 112
Main menu ....................................................................................................................... 112
Security menu .................................................................................................................. 112
vi
System Configuration menu ............................................................................................ 112
Diagnostics menu ............................................................................................................ 113
6 Specifications
Computer specifications ................................................................................................................... 114
15.6-inch, WXGA BrightView display specifications ......................................................................... 115
16.0-inch WXGA BrightView display specifications .......................................................................... 116
15.6-inch WXGA AntiGlare display specifications ............................................................................ 117
16.0-inch WXGA AntiGlare display specifications ............................................................................ 118
Hard drive specifications .................................................................................................................. 119
Blu-ray ROM DVD±R/RW SuperMulti Double-Layer Drive specifications ........................................ 120
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive specifications ................................ 121
System DMA specifications .............................................................................................................. 122
System interrupt specifications ......................................................................................................... 123
System I/O address specifications ................................................................................................... 124
System memory map specifications ................................................................................................. 127
7 Screw listing
Phillips PM2.0×3.0 screw ................................................................................................................. 129
Phillips PM2.0×3.0 screw ................................................................................................................. 131
Phillips PM2.0×14.0 captive screw ................................................................................................... 133
Phillips PM2.5×3.0 screw ................................................................................................................. 134
Phillips PM2.5×4.0 screw ................................................................................................................. 135
Phillips PM2.5×5.0 screw ................................................................................................................. 137
Phillips PM2.5×5.0 captive screw ..................................................................................................... 139
Phillips PM2.5×5.5 captive screw ..................................................................................................... 140
Phillips PM2.5×6.5 screw ................................................................................................................. 141
Phillips PM3.0×3.5 screw ................................................................................................................. 144
8 Backup and Recovery
Recovering system information ........................................................................................................ 145
Creating recovery discs ................................................................................................... 146
Backing up your information ............................................................................................................. 147
When to back up .............................................................................................................. 147
Backup suggestions ......................................................................................................... 147
Using system restore points ............................................................................................ 147
When to create restore points ......................................................................... 148
Create a system restore point ......................................................................... 148
Restore to a previous date and time ............................................................... 148
Performing a recovery ...................................................................................................................... 149
Recovering from the recovery discs ................................................................................ 149
Recovering from the dedicated recovery partition (select models only) .......................... 149
vii
9 Connector pin assignments
1394 ................................................................................................................................................. 150
Audio-in (microphone) ...................................................................................................................... 150
Audio-out (headphone) ..................................................................................................................... 151
External monitor ............................................................................................................................... 151
HDMI ................................................................................................................................................ 152
RJ-11 (modem) ................................................................................................................................ 153
RJ-45 (network) ................................................................................................................................ 153
Universal Serial Bus ......................................................................................................................... 154
10 Power cord set requirements
Requirements for all countries or regions ......................................................................................... 155
Requirements for specific countries or regions ................................................................................ 156
11 Recycling
Battery .............................................................................................................................................. 157
Display .............................................................................................................................................. 157
Index ................................................................................................................................................................. 163
viii
1 Product description
Category Description Computer models
equipped with
graphics subsystems
with discrete memory
Computer models
equipped with
graphics subsystems
with UMA memory
Product Name HP Pavilion dv6 Entertainment PC √ √
Processors Intel® Core™2 Duo T9900 3.06-GHz with 6-MB
L2 cache and 1066-MHz front side bus (FSB)
√ √
Intel® Core™2 Duo T9800 2.93-GHz with 6-MB
L2 cache and 1066-MHz front side bus (FSB)
√ √
Intel Core2 Duo T9600 2.80-GHz with 6-MB L2
cache and 1066-MHz FSB
√ √
Intel Core2 Duo T9550 2.66-GHz with 6-MB L2
cache and 1066-MHz FSB
√ √
Intel Core2 Duo T9400 2.53-GHz with 6-MB L2
cache and 1066-MHz FSB
√ √
Intel Core2 Duo T6600 2.20-GHz with 2-MB L2
cache and 800-MHz FSB
√ √
Intel Core2 Duo T6500 2.10-GHz with 2-MB L2
cache and 800-MHz FSB
√ √
Intel Core2 Duo T6400 2.00-GHz with 2-MB L2
cache and 800-MHz FSB
√ √
Intel Core2 Duo T5800 2.00-GHz with 2-MB L2
cache and 800-MHz FSB
√ √
Intel Pentium® Dual-Core T4300 2.10-GHz with
1-MB L2 cache and 800-MHz FSB
√ √
Intel Pentium® Dual-Core T4200 2.00-GHz with
1-MB L2 cache and 800-MHz FSB
√ √
Intel Pentium Dual-Core T3400 2.16-GHz with 1-
MB L2 cache and 667-MHz FSB
√ √
Intel Core2 Duo P8800 2.66-GHz with 3-MB L2
cache and 1066-MHz FSB
√ √
Intel Core2 Duo P8700 2.53-GHz with 3-MB L2
cache and 1066-MHz FSB
√ √
Intel Core Duo P8600 2.40-GHz with 3-MB L2
cache and 1066-MHz FSB
√ √
1
Category Description Computer models
equipped with
graphics subsystems
with discrete memory
Computer models
equipped with
graphics subsystems
with UMA memory
Intel Core Duo P8400 2.26-GHz with 3-MB L2
cache and 1066-MHz FSB
√ √
Intel Core Duo P7550 2.26-GHz with 3-MB L2
cache and 1066-MHz FSB
√ √
Intel Core Duo P7450 2.13-GHz with 3-MB L2
cache and 1066-MHz FSB
√ √
Intel Celeron® 900 2.20-GHz with 1-MB L2 cache
and 667-MHz FSB
√
Intel Celeron® T1600 1.66-GHz with 1-MB L2
cache and 667-MHz FSB
√
Chipset Northbridge: Intel PM45 √
Northbridge: Intel GM45 √
Southbridge: Intel ICH9M √ √
Graphics nVIDIA GeForce 9200M GS with 512 MB of
dedicated video memory (64 MB × 16 DDR2 × 4
PCs)
●Up to 767 MB video memory on computer
models equipped with 1 GB of main system
memory
●Up to 1279 MB video memory on computer
models equipped with 2 GB of main system
memory
●Up to 1791 MB video memory on computer
models equipped with 3 GB of main system
memory
●Up to 1791 MB video memory on computer
models equipped with 4 GB of main system
memory (32-bit OS)
●Up to 2303 MB video memory on computer
models equipped with 4 GB of main system
memory (64-bit OS)
√
ATI Discrete PCI Express x 16 Graphics
●ATI Mobility Radeon
TM
HD 4650 (M96) with
1 GB dedicated video memory (64MBx16
DDR3 x 8 PCs)
●ATI Mobility Radeon HD 4530 (M92) with
512 MB dedicated video memory (64MBx16
DDR3 x 4 PCs)
√
Intel Extreme Graphics - Intel GMA 4700MHD √
2 Chapter 1 Product description
Category Description Computer models
equipped with
graphics subsystems
with discrete memory
Computer models
equipped with
graphics subsystems
with UMA memory
Unified memory architecture (UMA) with shared
video memory:
●Up to 270 MB of graphics subsystem
memory on computer models equipped with
1024 MB of main system memory
●Up to 782 MB of graphics subsystem
memory on computer models equipped with
2048 MB of main system memory
●Up to 1294 MB of graphics subsystem
memory on computer models equipped with
3072 MB of main system memory
●Up to 1294 MB of graphics subsystem
memory on computer models equipped with
4096 MB of main system memory (32-bit
OS)
●Up to 1759 MB of graphics subsystem
memory on computer models equipped with
4096 MB of main system memory (64-bit
OS)
●Memory size is dynamic change
√
Panels ●15.6-inch, WXGA (1366 × 768) BrightView √ √
●16.0-inch, WXGA (1366 × 768) BrightView √ √
●15.6-inch WXGA (1366 × 768) AntiGlare √ √
●16.0-inch, WXGA (1366 × 768) AntiGlare √ √
●AntiGlare glass panel cover support √ √
●Support for lighted logo on display enclosure √ √
●Typical brightness 200 nits √ √
Memory 2 SODIMM slots √ √
Customer-accessible/upgradable √ √
PC2-6400, 800-MHz, DDR2 √ √
Dual-channel support √ √
3
Category Description Computer models
equipped with
graphics subsystems
with discrete memory
Computer models
equipped with
graphics subsystems
with UMA memory
Supports up to 8 GB system memory
●1024-MB total system memory (1024 MB ×
1, dual-channel)
●2048-MB total system memory (1024 MB ×
2, dual-channel)
●2048-MB total system memory (2048 MB ×
1, dual-channel)
●3072-MB total system memory (2048 MB +
1024 MB)
●4096-MB total system memory (2048 MB ×
2, dual-channel)
●6144-MB total system memory (2048 MB +
4096 MB)
●8192-MB total system memory (4096 MB ×
2, dual-channel)
√ √
Hard drives Supports all Serial ATA (SATA) 9.5 mm, 6.35-cm
(2.5-inch) hard drives
√ √
Supports one hard drive √ √
Support for HP ProtectSmart Hard
Drive Protection
√ √
Single hard drive configurations:
●160 GB (5400 rpm)
●250 GB (7200 rpm) (select models only)
●250 GB (5400 rpm)
●320 GB (7200 rpm) (select models only)
●320 GB (5400 rpm)
●400 GB (5400 rpm)
●500 GB (5400 rpm) (select models only)
√ √
Optical drives 12.7-mm tray load √ √
Serial ATA √ √
Fixed (removal of 1 screw required) √ √
Supports the following optical drives:
●DVD±RW and D-RW SuperMulti Double-
Layer Combo Drive with
●Blu-ray ROM DVD±R/RW SuperMulti
Double-Layer Drive
●Blu-ray ROM with LightScribe DVD±R/RW
SuperMulti Double-Layer Drive
√ √
4 Chapter 1 Product description
Category Description Computer models
equipped with
graphics subsystems
with discrete memory
Computer models
equipped with
graphics subsystems
with UMA memory
Webcam VGA camera √ √
Fixed (no tilt) √ √
Activity LED √ √
640 × 480 by 24 frames per second √ √
Microphone 2 omnidirectional microphones, dual-array with
appropriate software (supports beam forming,
echo cancellation, and noise suppression)
√ √
Audio HD Audio (IDT) √ √
Supports Microsoft® Premium Requirements √ √
Pavilion-branded Altec Lansing speakers √ √
Modem 56K V.92 data/fax modem (select models only) √ √
Supports all worldwide certification requirements √ √
Ethernet Integrated Realtek 10/100/1000 network
interface card (NIC)
√
Integrated Realtek 10/100 NIC √
Wireless Integrated wireless local area network (WLAN) options by way of wireless module:
Broadcom BCM4312 802.11b/g √ √
Broadcom BCM4312 802.11b/g + Bluetooth®
with two antennas
√ √
Broadcom 4322 802.11a/b/g/n WLAN √ √
Broadcom 4322 802.11a/b/g/n WLAN +
Bluetooth
√ √
Intel Wi-Fi Link 5100 802.11a/b/g/n
WLAN module with two antennas
√ √
Intel Wi-Fi Link 5100 802.11a/b/g/n
WLAN module + Bluetooth with two antennas
√ √
Intel Wi-Fi Link 5100 802.11a/b/g WLAN module
with two antennas
√ √
Intel Wi-Fi Link 5100 802.11a/b/g WLAN module
+ Bluetooth with two antennas
√ √
TV tuner Integrated NTSC/ATSC/ANG hybrid
TV tuner module (select models only)
√ √
Integrated worldwide analog DVB-T/ANG
TV tuner module (select models only)
√ √
Integrated DVB-T TV tuner module (select
models only)
√
Support for TV tuner antennas for both DVB-T
and NTSC/ATSC (select models only)
√ √
5
Category Description Computer models
equipped with
graphics subsystems
with discrete memory
Computer models
equipped with
graphics subsystems
with UMA memory
External media card One ExpressCard 54 slot √ √
Digital Media Slot, supports Secure Digital (SD )
Memory Card, MultiMediaCard (MMC), Memory
Stick (MS, Memory Stick Pro (MSP), xD-Picture
Card (XD)
√ √
Internal card
expansion
Two Mini Card slots
●One slot for WLAN
●One slot for TV tuner or other technologies
√ √
Ports VGA, 15-pin supporting 1920 × 1200 resolution
at 75Hz
√
VGA, 15-pin supporting 1600 × 1200 resolution
at 75Hz
√
High-Definition Multimedia Interface (HDMI)
v1.3b supporting 1080p with HDCP key
√ √
eSATA port combo with fourth USB port √ √
Four USB 2.0 ports √ √
IEEE 1394a √
RJ-11 modem (select models only) √ √
RJ-45 Ethernet √ √
Consumer infrared √ √
MCX connector for TV antennas (select models
only)
√ √
Two stereo headphone jacks (audio-out) √ √
Microphone input (audio-in) √ √
2-pin AC power for 90-W AC adapter √ √
Docking Expansion port 3 supports the HP xb3000
Notebook Expansion Base and HP Notebook
QuickDock
√ √
Keyboard/pointing
devices
16-inch full-size keyboard with numeric keypad √ √
Standard IMR keyboard with molded keyboard
characters
√ √
EspressoTextured Keyboard (select models
only)
√ √
TouchPad supports 2-way scrolling √ √
Taps enabled as default √ √
Power requirements 6-cell, 47-Wh, 2.55-Ah Li-ion battery √
6 Chapter 1 Product description
Category Description Computer models
equipped with
graphics subsystems
with discrete memory
Computer models
equipped with
graphics subsystems
with UMA memory
6-cell, 55-Wh, 2.55-Ah Li-ion battery (Germany
only)
√
6-cell, 55-Wh, 2.55-Ah Li-ion battery √
12-cell, 95-Wh, 8.8-Ah Li-ion battery √
90-W AC adapter with localized cable plug
support (2-wire plug with ground pin, supports 2-
pin DC connector)
√
65-W AC adapter with localized cable plug
support (2-wire plug with ground pin, supports 2-
pin DC connector)
√
Security Security cable slot √ √
Fingerprint reader (select models only) √ √
Operating system Preinstalled:
Windows Vista® Business (32 bit) √ √
Windows Vista Home Basic (32 bit) √ √
Windows Vista Premium (32 bit and 64 bit) √ √
Windows Vista Ultimate (64 bit) √ √
Serviceability AC adapter √ √
Battery (system) √ √
Hard drive √ √
Memory module √ √
Optical drive √ √
Mini Card components √ √
WLAN module √ √
7
2 External component identification
Top components
TouchPad
Item Component Description
(1) TouchPad light ●White: TouchPad is enabled.
●Amber: TouchPad is disabled.
(2) TouchPad* Moves the pointer and selects or activates items on the screen.
(3) Left TouchPad button* Functions like the left button on an external mouse.
(4) TouchPad on/off button Enables/disables the TouchPad.
(5) TouchPad vertical scroll zone Scrolls up or down.
(6) Right TouchPad button* Functions like the right button on an external mouse.
*This table describes factory settings. To view and change TouchPad preferences, select Start > Control Panel > Hardware
and Sound .> Mouse
8 Chapter 2 External component identification
Lights
Item Component Description
(1) Power lights* (2) ●On: The computer is on.
●Blinking: The computer is in the Sleep state.
●Off: The computer is off or in Hibernation.
(2) Battery light ●On: A battery is charging.
●Blinking: A battery that is the only available power source has
reached a low battery level. When the battery reaches a
critical battery level, the battery light begins blinking rapidly.
●Off: If the computer is plugged into an external power source,
the light is turned off when all batteries in the computer are
fully charged. If the computer is not plugged into an external
power source, the light stays off until the battery reaches a
low battery level.
(3) Drive light ●Blinking: The hard drive or optical drive is being accessed.
●Amber: HP ProtectSmart Hard Drive Protection has
temporarily parked the hard drive.
(4) Caps lock light On: Caps lock is on.
(5) Volume mute light ●White: Computer sound is turned on.
●Amber: Computer sound is turned off.
(6) Volume down light On: The volume scroll zone is being used to decrease speaker
volume.
(7) Volume up light On: The volume scroll zone is being used to increase speaker
volume.
(8) Previous/rewind light On: The previous/rewind button has been pressed.
(9) Play/pause light On: The play/pause button has been pressed.
(10) Next/fast forward light On: The next/fast forward button has been pressed.
Top components 9
Item Component Description
(11) Stop light On: The stop button has been pressed.
(12) Wireless light ●Blue: An integrated wireless device, such as a wireless local
area network (WLAN) device and/or a Bluetooth device, is
turned on.
●Amber: All wireless devices are turned off.
(13) Num lock light On: The integrated numeric keypad is enabled, or num lock is
enabled on a connected optional keypad.
*The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The
power light on the front of the computer is visible whether the computer is open or closed.
10 Chapter 2 External component identification
Buttons, speakers and fingerprint reader
Item Component Description
(1) Speakers (2) Produce sound.
(2) Power button* ●When the computer is off, press the button to turn on the
computer.
●When the computer is on, press the button briefly to initiate
Sleep.
●When the computer is in the Sleep state, press the button
briefly to exit Sleep.
●When the computer is in Hibernation, press the button briefly
to exit Hibernation.
If the computer has stopped responding and Windows® shutdown
procedures are ineffective, press and hold the power button for at
least 5 seconds to turn off the computer.
To learn more about your power settings, select Start > Control
Panel > System and Maintenance > Power Options.
(3) Volume mute button Mutes and restores speaker sound.
(4) Volume scroll zone Adjusts speaker volume. Slide your finger to the left to decrease
volume and to the right to increase volume. You can also tap the
minus sign (-) on the scroll zone to decrease volume, or tap the
plus sign (+) on the scroll zone to increase volume.
(5) Previous/rewind button ●Plays the previous track or chapter when the button is pressed
once.
●Rewinds media when the button is pressed simultaneously
with the fn key.
(6) Play/pause button Plays or pauses media.
Top components 11
Item Component Description
(7) Next/fast forward button ●Plays the next track or chapter when the button is pressed
once.
●Fast forwards media when pressed simultaneously with the
fn key.
(8) Stop button Stops playback.
(9) Wireless button Turns the wireless feature on or off, but does not create a wireless
connection.
NOTE: A wireless network must be set up in order to establish a
wireless connection.
(10) Fingerprint reader (select models only) Allows a fingerprint logon to Windows, instead of a password logon.
*This table describes factory settings. For information about changing factory settings, refer to the user guides located in Help
and Support.
12 Chapter 2 External component identification
Keys
Item Component Description
(1) esc key Displays system information about your computer when pressed in
combination with the fn key.
(2) fn key Executes frequently used system functions when pressed in
combination with a function key or the esc key.
(3) Windows logo key Displays the Windows Start menu.
(4) Windows applications key Displays a shortcut menu for items beneath the pointer.
(5) Integrated numeric keypad keys Can be used like the keys on an external numeric keypad.
(6) Function keys Execute frequently used system functions when pressed in
combination with the fn key.
Top components 13
Front components
Item Component Description
(1) Power light ●On: The computer is on.
●Blinking: The computer is in the Sleep state.
●Off: The computer is off or in Hibernation.
(2) Battery light ●On: A battery is charging.
●Blinking: A battery that is the only available power source has
reached a low battery level. When the battery reaches a
critical battery level, the battery light begins blinking rapidly.
●Off: If the computer is plugged into an external power source,
the light is turned off when all batteries in the computer are
fully charged. If the computer is not plugged into an external
power source, the light stays off until the battery reaches a low
battery level.
(3) Drive light ●Blinking: The hard drive or optical drive is being accessed.
●Amber: HP ProtectSmart Hard Drive Protection has
temporarily parked the hard drive.
(4) Consumer infrared lens Receives a signal from the remote control.
(5) Audio-in (microphone) jack Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.
(6) Audio-out (headphone) jacks (2) Produce sound when connected to optional powered stereo
speakers, headphones, ear buds, a headset, or television audio.
NOTE: This table describes factory settings. For information about changing factory settings, refer to the user guides located
in Help and Support.
14 Chapter 2 External component identification
Rear component
Component Description
Vent Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool internal
components and prevent overheating. It is normal for the internal
fan to cycle on and off during routine operation.
Right-side components
Item Component Description
(1) Optical drive Reads optical discs and, on select models, also writes to optical
discs.
(2) Optical drive light Blinking: The optical drive is being accessed.
(3) USB ports (2) Connect optional USB devices.
(4) TV antenna/cable jack (select models only) Connects a TV antenna, a digital cable device, or a satellite device
that receives standard or high-definition TV broadcasts.
(5) RJ-11 (modem) jack (select models only) Connects a modem cable.
(6) Security cable slot Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a deterrent, but
it may not prevent the computer from being mishandled or stolen.
(7) Activity light for the power connector Indicates that the power is on.
(8) Power connector Connects an AC adapter.
Rear component 15
Left-side components
Item Component Description
(1) External monitor port Connects an external VGA monitor or projector.
(2) Expansion port 3 Connects the computer to an optional docking device or an optional
expansion product.
NOTE: The computer has only one expansion port. The term
expansion port 3 describes the type of expansion port.
(3) RJ-45 (network) jack Connects a network cable.
(4) HDMI port Connects an optional video or audio device, such as a high-
definition television, or any compatible digital or audio component.
(5) eSATA/USB port (select models only) Connects an optional high-performance eSATA component, such
as an eSATA external hard drive, or connects an optional USB
device.
NOTE: Depending on your computer model, the computer may
include a USB port only.
(6) USB port Connects an optional USB device.
(7) 1394 port (select models only) Connects an optional IEEE 1394 or 1394a device, such as a
camcorder.
(8) Activity light for the Digital Media Slot Indicates that the component installed in the Digital Media Slot is
operating.
(9) Digital Media Slot Supports the following optional digital card formats:
●Memory Stick (MS)
●Memory Stick Pro (MSP)
●MultiMediaCard (MMC)
●Secure Digital (SD) Memory Card
●Secure Digital High Capacity (SDHC) Memory Card
●xD-Picture Card (XD) Type H
●xD-Picture Card (XD)Type M
(10) ExpressCard slot Supports optional ExpressCard/54 cards.
16 Chapter 2 External component identification
Bottom components
Item Component Description
(1) Hard drive bay Holds the hard drive.
(2) Vents (8) Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool internal
components and prevent overheating. It is normal for the internal
fan to cycle on and off during routine operation.
(3) Battery bay Holds the battery.
(4) Memory module compartment Contains the memory module slots.
Also holds the WLAN module, TV tuner card (select models only),
and the Intel Turbo Memory card (select models only).
CAUTION: To prevent an unresponsive system, replace the
wireless module only with a wireless module authorized for use in
the computer by the governmental agency that regulates wireless
devices in your country or region. If you replace the module and
then receive a warning message, remove the module to restore
computer functionality, and then contact technical support through
Help and Support.
(5) Battery release latch Releases the battery from the battery bay.
Bottom components 17
Display components
Item Component Description
(1) Internal display switch Turns off the display and initiates Sleep if the display is closed while
the power is on.
(2) Internal microphones (2) Record sound.
(3) Integrated webcam light On: The integrated webcam is in use.
(4) Integrated webcam Records audio and video and captures still photographs.
18 Chapter 2 External component identification
Wireless antennas (select models only)
On select computer models, at least 2 antennas send and receive signals from one or more wireless
devices.
NOTE: The antennas are not visible from the outside of the computer. For optimal transmission, keep
the areas immediately around the antennas free from obstructions.
To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental
Notices that applies to your country or region. These notices are located in Help and Support.
Wireless antennas (select models only) 19
3 Illustrated parts catalog
Service tag
When ordering parts or requesting information, provide the computer serial number and model
description provided on the service tag.
(1) Product name: This is the product name affixed to the front of the computer.
(2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product.
(3) Part number/Product number (p/n): This number provides specific information about the product's
hardware components. The part number helps a service technician to determine what components and
parts are needed.
(4) Model description: This is the alphanumeric identifier used to locate documents, drivers, and support
for the computer.
(5) Warranty period: This number describes the duration of the warranty period for the computer.
20 Chapter 3 Illustrated parts catalog
Computer major components
Item Description Spare part number
(1) Display assembly (includes wireless antenna transceivers and cables)
15.6-inch WXGA BrightView display assembly with low light VGA webcam and 2
microphones, Onyx
511867-001
Computer major components 21
Item Description Spare part number
15.6-inch WXGA BrightView display assembly with low light VGA webcam and 2
microphones, Moonlight White (replaced by 571743–001)
517862-001
15.6-inch WXGA BrightView display assembly with standard VGA webcam and 2
microphones, Moonlight White (replaces 517862–001)
571743–001
15.6-inch WXGA BrightView display assembly with low light VGA webcam and 2
microphones, Espresso Black (replaced by 571745-001)
518776-001
15.6-inch WXGA BrightView display assembly with standard VGA webcam and 2
microphones, Espresso Black (replaces 518776–001)
571745-001
15.6-inch WXGA AntiGlare display assembly with low light VGA webcam and 2
microphones, Moonlight White (replaced by 571744–001)
518775-001
15.6-inch WXGA AntiGlare display assembly with standard VGA webcam and 2
microphones, Moonlight White (replaces 518775–001)
571744–001
15.6-inch WXGA AntiGlare display assembly with low light VGA webcam and 2
microphones, Espresso Black (replaced by 571746-001)
518777-001
15.6-inch WXGA AntiGlare display assembly with standard VGA webcam and 2
microphones, Espresso Black (replaces 518777–001)
571746-001
16.0-inch WXGA BrightView display assembly with low light VGA webcam and 2
microphones, Onyx
511865-001
16.0-inch WXGA BrightView display assembly with low light VGA webcam and 2
microphones, Moonlight White (replaced by 571738-001)
512357-001
16.0-inch WXGA BrightView display assembly with standard VGA webcam and 2
microphones, Moonlight White (replaces 512357–001)
571738-001
16.0-inch WXGA BrightView display assembly with low light VGA webcam and 2
microphones, Espresso Black (replaced by 571740-001)
518771-001
16.0-inch WXGA BrightView display assembly with low light VGA webcam and 2
microphones, Espresso Black (replaces 518771–001)
571740-001
16.0-inch WXGA AntiGlare display assembly with low light VGA webcam and 2
microphones, Onyx
511866-001
16.0-inch WXGA AntiGlare display assembly with low light VGA webcam and 2
microphones, Moonlight White (replaced by 571739-001)
512358-001
16.0-inch WXGA AntiGlare display assembly with standard VGA webcam and 2
microphones, Moonlight White (replaces 512358–001)
571739-001
16.0-inch WXGA AntiGlare display assembly with low light VGA webcam and 2
microphones, Espresso Black (replaced by 571741-001)
518772-001
16.0-inch WXGA AntiGlare display assembly with standard VGA webcam and 2
microphones, Espresso Black (replaces 518772–001)
571741-001
NOTE: See Display assembly componentson page 33 for more information on display assembly spare part
numbers.
(2) Switch cover (includes LED board and cable)
Onyx 512829-001
Moonlight White (replaced by 571747-001 on select models) 518110-001
Moonlight White (replaces 518110–001 on select models) 571747-001
Espresso Black (replaced by 571757-001 on select models) 518790-001
22 Chapter 3 Illustrated parts catalog
Item Description Spare part number
Espresso Black (replaces 518790–001 on select models) 571757-001
(3) Power button board for computers with discrete graphics subsystem memory
(includes cable)
512835-001
Power button board for computers with UMA graphics subsystem memory (includes
cable)
512834-001
(4) Keyboard, Onyx, IMR, molded keyboard characters (includes keyboard cable)
For use in Belgium 511885-A41
For use in the Czech Republic 511885-221
For use in France 511885-051
For use in Germany 511885-041
For use in Greece 511885-DJ1
For use in Hungary 511885-211
For International use 511885-B31
For use in Israel 511885-BB1
For use in Italy 511885-061
For use in Latin America 511885-161
For use in Portugal 511885-131
For use in Russia 511885-251
For use in Spain 511885-071
For use in Switzerland 511885-BG1
For use in Taiwan 511885-AB1
For use in Turkey 511885-141
For use in the United Kingdom 511885-031
For use in the United States 511885-001
Espresso Textured Keyboard, Onyx, (includes keyboard cable)
For use in Denmark, Norway, and Sweden 514115-DH1
For use in French Canada 514115-121
For use in Japan 514115-291
For use in Saudi Arabia 514115-171
For use in South Korea 514115-AD1
For use in Thailand 514115-281
Espresso Textured Keyboard, Moonlight White, (replaced by 517863–xx1) (includes keyboard cable)
For use in Belgium 517864-A41
For use in the Czech Republic 517864-221
For use in Denmark, Norway, and Sweden 517864-DH1
Computer major components 23
Item Description Spare part number
For use in France 517864-051
For use in French Canada 517864-121
For use in Germany 517864-041
For use in Greece 517864-DJ1
For use in Hungary 517864-211
For international use 517864-B31
For use in Israel 517864-BB1
For use in Italy 517864-061
For use in Japan 517864-291
For use in Latin America 517864-161
For use in Portugal 517864-131
For use in Russia 517864-251
For use in Saudi Arabia 517864-171
For use in South Korea 517864-AD1
For use in Spain 517864-071
For use in Switzerland 517864-111
For use in Taiwan 517864-AB1
For use in Thailand 517864-281
For use in Turkey 517864-141
For use in the United Kingdom 517864-031
For use in the United States 517864-001
Keyboard, Moonlight White, IMR, molded keyboard characters (replaces 517864-xx1) (includes keyboard cable)
For use in Belgium 517683-A41
For use in the Czech Republic 517683-221
For use in France 517683-051
For use in Germany 517683-041
For use in Greece 517683-DJ1
For use in Hungary 517683–211
For international use 517683-B31
For use in Israel 517683-BB1
For use in Italy 517683-061
For use in Latin America 517683-161
For use in Portugal 517683-131
For use in Russia 517683-251
24 Chapter 3 Illustrated parts catalog
Item Description Spare part number
For use in Spain 517683-071
For use in Switzerland 517683-BG1
For use in Taiwan 517683-AB1
For use in Turkey 517683-141
For use in the United Kingdom 517683-031
For use in the United States 517683-001
Keyboard, Espresso Black, IMR, molded keyboard characters (includes keyboard cable)
For use in Belgium 518965-A41
For use in the Czech Republic 518965-221
For use in France 518965-051
For use in Germany 518965-041
For use in Greece 518965-DJ1
For use in Hungary 518965-211
For international use 518965-B31
For use in Israel 518965-BB1
For use in Italy 518965-061
For use in Latin America 518965-161
For use in Portugal 518965-131
For use in Russia 518965-251
For use in Saudi Arabia 518966-171
For use in Spain 518965-071
For use in Switzerland 518965-111
For use in Taiwan 518965-AB1
For use in Turkey 518965-141
For use in the United Kingdom 518965-031
For use in the United States 518965-001
Espresso Textured Keyboard, Espresso Black, IMR, (includes keyboard cable)
For use in Belgium 518966-A41
For use in the Czech Republic 518966-221
For use in Denmark, Norway, and Sweden 518966-DH1
For use in France 518966-051
For use in French Canada 518966-121
For use in Germany 518966-041
For use in Greece 518966-DJ1
Computer major components 25
Item Description Spare part number
For use in Hungary 518966-211
For international use 518966-B31
For use in Israel 518966-BB1
For use in Italy 518966-061
For use in Japan 518966-291
For use in Latin America 518966-161
For use in Portugal 518966-131
For use in Russia 518966-251
For use in Saudi Arabia 518966-171
For use in South Korea 518966-AD1
For use in Spain 518966-071
For use in Switzerland 518966-
For use in Taiwan 518966-AB1
For use in Thailand 518966-281
For use in Turkey 518966-141
For use in the United Kingdom 518966-031
For use in the United States 518966—001
Espresso Textured Keyboard, Espresso Black, (includes keyboard cable)
For use in Belgium 570228-A41
For use in the Czech Republic 570228-221
For use in Denmark, Norway, and Sweden 570228-DH1
For use in France 570228-051
For use in French Canada 570228-121
For use in Germany 570228-041
For use in Greece 570228-DJ1
For use in Hungary 570228-211
For international use 570228-B31
For use in Israel 570228-BB1
For use in Italy 570228-061
For use in Japan 570228-291
For use in Latin America 570228-161
For use in Portugal 570228-131
For use in Russia 570228-251
For use in Saudi Arabia 570228-171
26 Chapter 3 Illustrated parts catalog
Item Description Spare part number
For use in South Korea 570228-AD1
For use in Spain 570228-071
For use in Switzerland 570228–111
For use in Taiwan 570228-AB1
For use in Thailand 570228-281
For use in Turkey 570228-141
TFor use in the United Kingdom 570228-031
(5) Top cover (includes TouchPad and TouchPad buttons, and speaker assembly):
For use only with computer models equipped with a fingerprint reader, Onyx 512828-001
For use only with computer models not equipped with a fingerprint reader, Onyx 511888-001
For use only with computer models equipped with a fingerprint reader, Moonlight White 518108-001
For use only with computer models not equipped with a fingerprint reader, Moonlight
White
518109-001
For use only with computer models equipped with a fingerprint reader, Espresso Black 518788-001
For use only with computer models not equipped with a fingerprint reader, Espresso
Black
518789-001
(6) Fingerprint reader board (select models only) Included with the top cover
Plastics Kit, includes:
●(7a) Express card slot bezel
●(7b) Memory module cover
●(7c) Hard drive bay cover
NOTE: See Plastics Kit on page 37 for more information.
511890-001
(8) System board (includes replacement thermal material):
●For use with computer models equipped with UMA graphics subsystem memory 511863-001
●For use with computer models equipped with discrete graphics subsystem
memory
511864-001
●For use with computer models equipped with ATI Mobility Radeon HD4650
graphics with 1-GB memory
518431-001
●For use with computer models equipped with ATI Mobility Radeon HD4530
graphics with 512-MB memory
518432-001
●For use with computer models equipped with UMA graphics and GM47 chipset 518433-001
(9) Modem module:
NOTE: The modem module spare part kit does not include a modem module cable. The modem module cable is
included in the Cable Kit, spare part number 512832-001. For more information, see Cable Kit on page 38.
For use in all countries and regions except Australia and New Zealand 461749-001
For use only in Australia and New Zealand 461749-011
(10) Processor (includes replacement thermal material):
Computer major components 27
Item Description Spare part number
Intel Core2 Duo T9900 3.06-GHz with 6-MB L2 cache and 1066-MHz FSB 570434-001
Intel Core2 Duo T9800 2.93-GHz with 6-MB L2 cache and 1066-MHz FSB 507951-001
Intel Core2 Duo T9600 2.80-GHz with 6-MB L2 cache and 1066-MHz FSB 507955-001
Intel Core2 Duo T9550 2.66-GHz with 6-MB L2 cache and 1066-MHz FSB 507953-001
Intel Core2 Duo T9400 2.53-GHz with 6-MB L2 cache and 1066-MHz FSB 507954-001
Intel Core2 Duo T6600 2.20-GHz with 2-MB L2 cache and 800-MHz FSB 513593-001
Intel Core2 Duo T6500 2.10-GHz with 2-MB L2 cache and 800-MHz FSB 572928-001
Intel Core2 Duo T6400 2.00-GHz with 2-MB L2 cache and 800-MHz FSB 513592-001
Intel Core2 Duo T5800 2.00-GHz with 2-MB L2 cache and 800-MHz FSB 515040-001
Intel Pentium Dual-Core T4300 2.10-GHz with 1-MB L2 cache and 800-MHz FSB 572929-001
Intel Pentium Dual-Core T4200 2.00-GHz with 1-MB L2 cache and 800-MHz FSB 513599-001
Intel Pentium Dual-Core T3400 2.16-GHz with 1-MB L2 cache and 667-MHz FSB 509549-001
Intel Core Duo P8800 2.66-GHz with 3-MB L2 cache and 1066-MHz FSB 570036-001
Intel Core Duo P8700 2.53-GHz with 3-MB L2 cache and 1066-MHz FSB 507960-001
Intel Core Duo P8600 2.40-GHz with 3-MB L2 cache and 1066-MHz FSB 507961-001
Intel Core Duo P8400 2.26-GHz with 3-MB L2 cache and 1066-MHz FSB 507962-001
Intel Core Duo P7550 2.26-GHz with 3-MB L2 cache and 1066-MHz FSB 573076-001
Intel Core Duo P7450 2.13-GHz with 3-MB L2 cache and 1066-MHz FSB 507122-001
Intel Celeron 900 2.20-GHz with 1-MB L2 cache and 667-MHz FSB 534419–001
Intel Celeron T1600 1.66-GHz with 1-MB L2 cache and 667-MHz FSB (for use only
with computers equipped with UMA graphics memory subsystems)
501894-001
(11) WLAN module: (Bluetooth supported)
Intel Wi-Fi Link 5100 802.11a/b/g/n WLAN module for use with computer models in all
countries and regions
480985-001
Intel Wi-Fi Link 5100 802.11a/b/g WLAN module for use with computer models in all
countries and regions
482957-001
Broadcom 4322 802.11a/b/g/n WLAN module for use only with computer models in
Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam,
Puerto Rico, Trinidad and Tobago, the U.S. Virgin Islands, and the United States
487330-001
28 Chapter 3 Illustrated parts catalog
Item Description Spare part number
Broadcom 4322 802.11a/b/g/n WLAN module for use only with computer models in
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh,
Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad,
Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala,
Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India,
Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta,
the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway,
Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines,
Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa,
San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles,
Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia,
South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia,
St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates,
the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen,
Zaire, Zambia, and Zimbabwe
487330-002
Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in
Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam,
Puerto Rico, Trinidad and Tobago, the U.S. Virgin Islands, and the United States
459263-001
Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh,
Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad,
Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala,
Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India,
Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta,
the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway,
Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines,
Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa,
San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles,
Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia,
South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia,
St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates,
the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen,
Zaire, Zambia, and Zimbabwe
459263-002
Computer major components 29
Item Description Spare part number
Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in
Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam,
Puerto Rico, Trinidad and Tobago, the U.S. Virgin Islands, and the United States
504593-001
Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh,
Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad,
Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala,
Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India,
Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta,
the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway,
Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines,
Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa,
San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles,
Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia,
South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia,
St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates,
the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen,
Zaire, Zambia, and Zimbabwe
504593-002
Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in
Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam,
Puerto Rico, Trinidad and Tobago, the U.S. Virgin Islands, and the United States
504664-001
30 Chapter 3 Illustrated parts catalog
Item Description Spare part number
Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh,
Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad,
Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala,
Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India,
Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta,
the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway,
Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines,
Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa,
San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles,
Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia,
South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia,
St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates,
the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen,
Zaire, Zambia, and Zimbabwe
504664-002
(12) Fan/heat sink assembly (includes replacement thermal material):
For use only with computer models equipped with ATI Mobility Radeon HD4650
graphics subsystems
518435-001
For use only with computer models equipped with graphics subsystems with discrete
graphics memory
512837-001
For use only with computer models equipped with graphics subsystems with UMA
graphics memory
512830-001
(13) USB board
For use with computer models equipped with graphics subsystems with UMA graphics
memory
516497-001
For use with computer models equipped with graphics subsystems with discrete
graphics memory
516855-001
(14) Bluetooth module 483113-001
Bluetooth cable (not illustrated) 489822-001
(15) Audio/infrared board (includes cable):
For use with computer models equipped with UMA graphics subsystem memory 511892-001
For use with computer models equipped with discrete graphics subsystem memory 512836-001
(16) Power connector cable
NOTE: The power connector cable is available in the Cable Kit, spare part number
512832-001. For more information, see Cable Kit on page 38.
(17) Battery
Computer major components 31
Item Description Spare part number
12-cell, 95-Wh, 8.8-Ah Li-ion battery for use with all computer models 511884-001
6-cell, 55-Wh, 2.55-Ah Li-ion battery for use with all computer models 511872-001
6-cell, 55-Wh, 2.55-Ah Li-ion battery for use only with computers for Germany 511872-002
6-cell, 47-Wh, 2.55-Ah Li-ion battery for use with all computer models 511883-001
(18) Base enclosure (includes rubber feet) 511887-001
Rubber Feet Kit (not illustrated, includes 4 base enclosure rubber feet) 516499-001
(19) RTC battery 449729-001
TV tuner module (not illustrated):
NOTE: The TV tuner module spare part kits do not include a TV tuner module cable. The TV tuner module cable
is included in the Cable Kit, spare part number 512832-001.
NTSC/ATSC/ANG hybrid TV tuner module 482899-001
DVB-T/ANG TV tuner module 482899-002
DVB-T TV tuner module (for use only with computers equipped with discrete graphics
memory)
482899-003
TV tuner external antenna cable (not illustrated):
With F-PAL jack 482900-001
With PAL jack 482900-002
(20) Optical drive (includes bezel and bracket):
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive 511880-001
Blu-ray ROM DVD±R/RW SuperMulti Double-Layer Drive 511881-001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive 511882-001
(21) Memory module (DDR2, 800-MHz, PC2-6400, 1-DIMM):
4 GB 511871-001
2 GB 511870-001
1 GB 511869-001
(22) Hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab, and four rubber isolators):
160 GB, 5400 rpm 511873-001
250 GB, 7200 rpm (select models only) 511874-001
250 GB, 5400 rpm 511875-001
320 GB, 7200 rpm (select models only) 511876-001
320 GB, 5400 rpm 511877-001
400 GB, 5400 rpm 511878-001
500 GB, 5400 rpm 511879-001
Hard Drive Hardware Kit (not illustrated, includes left and right bracket rails, connector
cable, Mylar cover with tab, and 4 rubber isolators)
483862-001
32 Chapter 3 Illustrated parts catalog
Display assembly components
The HP Pavilion dv6 Entertainment PC offers two types of display assemblies. Component spare parts
are listed in this section for AntiGlare display assemblies and BrightView display assemblies.
AntiGlare display assembly spare parts
Item Description Spare part number
(1) Display enclosure, Onyx (for 16-inch only) (includes wireless antenna transceivers
and cables)
513478-001
Display enclosure, Moonlight White (for 16-inch only) (includes wireless antenna
transceivers and cables)
517861-001
Display enclosure, Espresso Black (for 16-inch only) (includes wireless antenna
transceivers and cables)
518774-001
Display enclosure, Moonlight White (for 15.6-inch only) (includes wireless antenna
transceivers and cables) (replaced by 571744–001)
518775-001
Display enclosure, Moonlight White (for 15.6-inch only) (includes wireless antenna
transceivers and cables) (replaces 518775–001)
571744–001
Display enclosure, Espresso Black (for 15.6-inch only) (includes wireless antenna
transceivers and cables) (replaced by 571746–001)
518777-001
Display enclosure, Espresso Black (for 15.6-inch only) (includes wireless antenna
transceivers and cables) (replaces 518777–001)
571746–001
(2) Display inverter 488317-001
(3) Webcam/microphone module, low light VGA (includes cable) 512827-001
Webcam/microphone , standard VGA (includes cable) 571742–001
(4) Display Hinge Kit (for 16-inch only) (includes left and right hinges) 513477-001
Display Hinge Kit (for 15.6-inch only) (includes left and right hinges) 519209-001
Display Rubber Kit, (for 16-inch only) (not illustrated, includes display bezel rubber
screw covers)
512361-001
Display Rubber Kit, (for 15.6-inch only) (not illustrated, includes display bezel rubber
screw covers)
513479-001
Display assembly components 33
Item Description Spare part number
Display Screw Kit (not illustrated) 512362-001
Display LCD cable (not illustrated) 512825-001
34 Chapter 3 Illustrated parts catalog
BrightView display assembly spare parts
Item Description Spare part number
(1) Display bezel (includes logo and display lid switch actuator magnet)
For use with computer models equipped with 16-inch displays 512359-001
For use with computer models equipped with 15.6-inch displays 512364-001
(2) Webcam/microphone module, low light VGA (includes cable) (replaced by
571742-001)
512827-001
Webcam/microphone module, standard VGA (includes cable) (replaces 512827–
001)
571742-001
(3) BrightView display panel (includes display panel cable):
For use with computer models equipped with 16-inch display panels 511868-001
For use with computer models equipped with 15.6-inch display panels 512363-001
(4) Display Hinge Kit (includes left and right hinges)
For use with computer models equipped with 16-inch display panels 512360-001
For use with computer models equipped with 15.6-inch display panels 512365-001
(5) Display inverter 488317-001
(6a) Display cable 512825-001
(6b) Wireless antenna cable (included in Cable Kit 512832-001)
(6c) Webcam/microphone cable (includes module) 512827-001
Webcam/microphone cable (includes module) (replaces 512827–001) 571742-001
Display assembly components 35
Item Description Spare part number
(7) Display enclosure, Onyx (includes wireless antenna transceivers and cables and
logo LED board and cable) 16-inch
512824-001
DIsplay enclosure, Moonlight White (includes wireless antenna transceivers and
cables and logo LED board and cable) 15.6-inch
517860-001
DIsplay enclosure, Espresso Black (includes wireless antenna transceivers and
cables and logo LED board and cable) 16-inch
518773-001
Display Rubber Kit (not illustrated, includes display bezel rubber screw covers) 15.6-
inch
513479-001
Display Rubber Kit (not illustrated, includes display bezel rubber screw covers) 16-
inch
512361-001
Display Screw Kit (not illustrated) 512362-001
36 Chapter 3 Illustrated parts catalog
Plastics Kit
Item Description Spare part number
Plastics Kit 511890-001
(1) ExpressCard slot bezel
(2) Hard drive bay cover (includes 2 captive screws, secured by C-clips)
(3) Memory module compartment cover (includes 1 captive screw, secured by a C-clip)
Plastics Kit 37
Cable Kit
Item Description Spare part number
Cable Kit 512832-001
(1) Fingerprint reader cable
(2) Audio/Infrared module cable
(3) Modem module cable (includes RJ-11 jack)
(4) USB cable
(5) Power connector cable
TV tuner module cable (not illustrated)
38 Chapter 3 Illustrated parts catalog
Miscellaneous parts
Description Spare part number
AC adapters
65-W AC adapter 463958-001
90-W AC adapter, PFC 463955-001
90-W AC adapter for use only in Germany 510485-005
Power cords, Black:
Argentina 490371-D01
Australia and New Zealand 490371-011
Belgium, Europe, Finland, France, Germany, Greece, the Netherlands, Norway, Portugal, Spain,
and Sweden
490371-021
Brazil 490371-201
Canada, French Canada, Latin America, Thailand, and the United States 490371-001
Denmark 490371-081
India 490371-D61
Israel 490371-BB1
Italy 490371-061
Japan 490371-291
The People's Republic of China 490371-AA1
South Africa 490371-AR1
South Korea 490371-AD1
Switzerland 490371-111
Taiwan 490371-AB1
The United Kingdom and Hong Kong 490371-031
Bluetooth cable 489822–001
Remote controls
Full-function remote control 465540-001
Full-function remote control with teletext 465541-001
Rubber Kit 516499–001
Miscellaneous parts 39
Description Spare part number
Headphone, black, with volume control and stereo/mono switch 371693–001
Screw Kit
●Phillips PM2.0×3.0 screw
●Phillips PM2.0×14.0 captive screw
●Phillips PM2.5×3.0 screw
●Phillips PM2.5×4.0 screw
●Phillips PM2.5×5.0 screw
●Phillips PM2.5×5.0 captive screw
●Phillips PM2.5×5.5 captive screw
●Phillips PM2.5×6.5 screw
●Phillips PM3.0×3.5 screw
516498-001
Sequential part number listing
Spare part
number
Description
371693-001 Headphone, black, with volume control and stereo/mono switch
449729-001 RTC battery
459263-001 Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in
Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico,
Trinidad and Tobago, the U.S. Virgin Islands, and the United States
459263-002 Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda,
Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile,
the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus,
the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt,
El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon,
Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy,
the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon,
Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia,
Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama,
Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa,
South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago,
Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
461749-001 Modem module for use in all countries and regions except Australia and New Zealand
461749-011 Modem module for use only in Australia and New Zealand
40 Chapter 3 Illustrated parts catalog
Spare part
number
Description
463955-001 90-W AC adapter, PFC
463958-001 65-W AC adapter
465540-001 Full-function remote control
465541-001 Full-function remote control with teletext
480985-001 Intel Wi-Fi Link 5100 802.11a/b/g/n WLAN module for use with computer models in all countries and
regions
482899-001 NTSC/ATSC/ANG hybrid TV tuner module
482899-002 DVB-T/ANG TV tuner module
482899-003 DVB-T TV tuner module (for use only with computers equipped with discrete graphics memory)
482900-001 TV tuner external antenna cable with F-PAL jack
482900-002 TV tuner external antenna cable with PAL jack
482957-001 Intel Wi-Fi Link 5100 802.11a/b/g WLAN module for use with computer models in all countries and
regions
483113-001 Bluetooth module
483862-001 Hard Drive Hardware Kit (includes left and right bracket rails, connector cable, Mylar cover with tab, and
4 rubber isolators
487330-001 Broadcom 4322 802.11a/b/g/n WLAN module for use only with computer models in Antigua and Barbuda,
Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico, Trinidad and Tobago,
the U.S. Virgin Islands, and the United States
487330-002 Broadcom 4322 802.11a/b/g/n WLAN module for use only with computer models in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda,
Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile,
the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus,
the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt,
El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon,
Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy,
the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon,
Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia,
Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama,
Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa,
South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago,
Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
488317-001 Display inverter
489822-001 Bluetooth cable
490371-001 Power cord for use in Canada, French Canada, Latin America, Thailand, and the United States
490371-011 Power cord for use in Australia and New Zealand
Sequential part number listing 41
Spare part
number
Description
490371-021 Power cord for use in Belgium, Europe, Finland, France, Germany, Greece, the Netherlands, Norway,
Portugal, Spain, and Sweden
490371-031 Power cord for use in the United Kingdom and Hong Kong
490371-061 Power cord for use in Italy
490371-081 Power cord for use in Denmark
490371-111 Power cord for use in Switzerland
490371-201 Power cord for use in Brazil
490371–291 Power cord for use in Japan
490371-AA1 Power cord for use in the People's Republic of China
490371-AB1 Power cord for use in Taiwan
490371-AD1 Power cord for use in South Korea
490371-AR1 Power cord for use in South Africa
490371-BB1 Power cord for use in Israel
490371-D01 Power cord for use in Argentina
490371-D61 Power cord for use in India
501894-001 Intel Celeron T1600 1.66-GHz processor with 1-MB L2 cache and 667-MHz FSB (for use only with
computers equipped with UMA graphics memory subsystems)
504593-001 Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in
Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico,
Trinidad and Tobago, the U.S. Virgin Islands, and the United States
504593-002 Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda,
Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile,
the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus,
the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt,
El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon,
Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy,
the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon,
Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia,
Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama,
Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa,
South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago,
Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
504664-001 Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in
Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico,
Trinidad and Tobago, the U.S. Virgin Islands, and the United States
42 Chapter 3 Illustrated parts catalog
Spare part
number
Description
504664-002 Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda,
Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile,
the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus,
the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt,
El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon,
Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy,
the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon,
Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia,
Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama,
Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia,
the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa,
South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago,
Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
507122-001 Intel Core Duo P7450 2.13-GHz processor with 3-MB L2 cache and 1066-MHz FSB
507951-001 Intel Core2 Duo T9800 2.93-GHz processor with 6-MB L2 cache and 1066-MHz FSB
507953-001 Intel Core2 Duo T9550 2.66-GHz processor with 6-MB L2 cache and 1066-MHz FSB
507954-001 Intel Core2 Duo T9400 2.53-GHz processor with 6-MB L2 cache and 1066-MHz FSB
507955-001 Intel Core2 Duo T9600 2.80-GHz processor with 6-MB L2 cache and 1066-MHz FSB
507960-001 Intel Core2 Duo P8700 2.53-GHz processor with 3-MB L2 cache and 1066-MHz FSB
507961-001 Intel Core2 Duo P8600 2.40-GHz processor with 3-MB L2 cache and 1066-MHz FSB
507962-001 Intel Core2 Duo P8400 2.26-GHz processor with 3-MB L2 cache and 1066-MHz FSB
509549-001 Intel Pentium Dual-Core T3400 2.16-GHz processor with 1-MB L2 cache and 667-MHz FSB
510485-005 90-W AC adapter for use only in Germany
511863-001 System board for use with computer models equipped with UMA graphics subsystem memory (includes
replacement thermal material)
511864-001 System board for use with computer models equipped with discrete graphics subsystem memory (includes
replacement thermal material)
511865-001 16.0-inch WXGA BrightView display assembly with low light VGA webcam and 2 microphones, Onyx
511866-001 16.0-inch WXGA AntiGlare display assembly with low light VGA webcam and 2 microphones, Onyx
511867-001 15.6-inch WXGA BrightView display assembly with low light VGA webcam and 2 microphones, Onyx
511868-001 BrightView display panel for use only with computer models equipped with 16-inch display panels
(includes display panel cable)
511869-001 1 GB memory module (DDR2, 800-MHz, PC2-6400, 1-DIMM)
511870-001 2 GB memory module (DDR2, 800-MHz, PC2-6400, 1-DIMM)
511871-001 4 GB memory module (DDR2, 800-MHz, PC2-6400, 1-DIMM)
511872-001 6-cell, 55-Wh, 2.55-Ah Li-ion battery for use with all computer models
Sequential part number listing 43
Spare part
number
Description
511872-002 6-cell, 55-Wh, 2.55-Ah Li-ion battery for use only with computers for Germany
511873-001 160 GB, 5400 rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and four rubber isolators)
511874-001 250 GB, 7200 rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and four rubber isolators) (select models only)
511875-001 250 GB, 5400 rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and four rubber isolators)
511876-001 320 GB, 7200 rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and four rubber isolators) (select models only)
511877-001 320 GB, 5400 rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and four rubber isolators)
511878-001 400 GB, 5400 rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and four rubber isolators)
511879-001 500 GB, 5400 rpm hard drive (includes left and right bracket rails, connector cable, Mylar cover with tab,
and four rubber isolators) (select models only)
511880-001 DVD±RW and CD-ROM Super Multi Double-Layer Combo Drive
511881-001 Blu-ray ROM DVD±R/RW SuperMulti Double-Layer Drive
511882-001 Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive
511883-001 6-cell, 47-Wh, 2.55-Ah Li-ion battery for use with all computer models
511884-001 12-cell, 95-Wh, 8.8-Ah Li-ion battery for use with all computer models
511885-001 Keyboard for use in the United States, Onyx, molded keyboard characters
511885-031 Keyboard for use in the United Kingdom, Onyx, molded keyboard characters
511885-041 Keyboard for use in Germany, Onyx, molded keyboard characters
511885-051 Keyboard for use in France, Onyx, molded keyboard characters
511885-061 Keyboard for use in Italy, Onyx, molded keyboard characters
511885-071 Keyboard for use in Spain, Onyx, molded keyboard characters
511885-131 Keyboard for use in Portugal, Onyx, molded keyboard characters
511885-141 Keyboard for use in Turkey, Onyx, molded keyboard characters
511885-161 Keyboard for use in Latin America, Onyx, molded keyboard characters
511885-211 Keyboard for use in Hungary, Onyx, molded keyboard characters
511885-221 Keyboard for use in the Czech Republic, Onyx, molded keyboard characters
511885-251 Keyboard for use in Russia, Onyx, molded keyboard characters
511885-A41 Keyboard for use in Belgium, Onyx, molded keyboard characters
511885-AB1 Keyboard for use in Taiwan, Onyx, molded keyboard characters
511885-B31 Keyboard for use Internationally, Onyx, molded keyboard characters
511885-BB1 Keyboard for use in Israel, Onyx, molded keyboard characters
511885-BG1 Keyboard for use in Switzerland, Onyx, molded keyboard characters
44 Chapter 3 Illustrated parts catalog
Spare part
number
Description
511885-DJ1 Keyboard for use in Greece, Onyx, molded keyboard characters
511887-001 Base enclosure (includes rubber feet)
511888-001 Top cover for use only with computer models not equipped with a fingerprint reader, Onyx (includes
TouchPad and TouchPad buttons, and speaker assembly)
511890-001 Plastics Kit (see Plastics Kit on page 37)
511892-001 Audio/infrared board (for use with computer models equipped with UMA graphics subsystem memory)
512357-001 16.0-inch WXGA BrightView display assembly with low light VGA webcam and 2 microphones, Moonlight
White (replaced with 571738–001)
512358-001 16.0-inch WXGA AntiGlare display assembly with low light VGA webcam and 2 microphones, Moonlight
White (replaced with 571739–001)
512359-001 Display bezel for use with computer models equipped with 16-inch BrightView displays (includes logo and
display lid switch actuator magnet)
512360-001 Display Hinge Kit for use only with computer models equipped with 16-inch BrightView display panels
(includes left and right hinges)
512361-001 Display Rubber Kit for BrightView displays (includes display bezel rubber screw covers)
512362-001 Display Screw Kit
512363-001 BrightView display panel for use only with computer models equipped with 15.6-inch display panels
(includes display panel cable)
512364-001 Display bezel for use with computer models equipped with 15.6-inch BrightView displays (includes logo
and display lid switch actuator magnet)
512365-001 Display Hinge Kit for use only with computer models equipped with 15.6-inch BrightView display panels
(includes left and right hinges)
512824-001 Display enclosure for 16-inch BrightView displays (includes wireless antenna transceivers and cables),
Onyx
512825-001 Display Cable for use with computers models equipped with BrightView display panels
512827-001 Webcam/microphone module, low light VGA (includes cable) (replaced with 571742–001)
512828-001 Top cover for use only with computer models equipped with a fingerprint reader, Onyx (includes TouchPad
and TouchPad buttons, and speaker assembly)
512829-001 Switch cover (includes LED board and cable)
512830-001 Fan/heat sink assembly for use only with computer models equipped with graphics subsystems with UMA
graphics memory (includes replacement thermal material)
512832-001 Cable Kit (see Cable Kit on page 38)
512834-001 Power button board for computer models equipped with UMA graphics subsystem memory (includes
cable)
512835-001 Power button board for computers with discrete graphics subsystem memory (includes cable)
512836-001 Audio infrared board for use with computer models equipped with graphics subsystems with discrete
graphics memory
512837-001 Fan/heat sink assembly for use only with computer models equipped with graphics subsystems with
discrete graphics memory (includes replacement thermal material)
513477-001 Display Hinge Kit for 16-inch AntiGlare displays (includes left and right hinges)
Sequential part number listing 45
Spare part
number
Description
513478-001 Display enclosure for 16-inch AntiGlare displays (includes wireless antenna transceivers and cables),
Onyx
513479-001 Display Rubber Kit for 15.6-inch AntiGlare displays (includes display bezel rubber screw covers)
513592-001 Intel Core2 Duo T6400 2.00-GHz with 2-MB L2 cache and 800-MHz FSB
513593-001 Intel Core2 Duo T6600 2.20-GHz processor with 2-MB L2 cache and 800-MHz FSB
513599-001 Intel Pentium Dual-Core T4200 2.00-GHz processor with 1-MB L2 cache and 800-MHz FSB
514115-121 Espresso Textured Keyboard for use in French Canada, Onyx
514115-171 Espresso Textured Keyboard for use in Saudi Arabia, Onyx
514115-281 Espresso Textured Keyboard for use in Thailand, Onyx
514115-291 Espresso Textured Keyboard for use in Japan, Onxy
514115-AD1 Espresso Textured Keyboard for use in South Korea
514115-DH1 Espresso Textured Keyboard for use in Denmark, Norway, and Sweden, Onyx
515040-001 Intel Core2 Duo T5800 2.00-GHz processor with 2-MB L2 cache and 800-MHz FSB
516497-001 USB board for computer models equipped with graphics subsystems with UMA graphics memory
516498-001 Screw Kit
516499-001 Rubber Feet Kit
516855-001 USB board for computer models equipped with graphics subsystems with discrete graphics memory
517860-001 Display enclosure for 15.6-inch BrightView displays (includes wireless antenna transceivers and cables
and logo LED board and cable), Moonlight White
517861-001 Display enclosure for 16-inch AntiGlare displays (includes wireless antenna transceivers and cables),
Moonlight White
517862-001 15.6-inch WXGA BrightView display assembly with low light VGA webcam and 2 microphones, Moonlight
White (includes wireless antenna transceiver cables) (replaced with 571743–001)
517863-001 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in the
United States
517863-031 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in the
United Kingdom
517863-041 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in
Germany
517863-051 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in
France
517863-061 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in Italy
517863-071 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in Spain
517863-111 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in
Switzerland
517863-131 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in
Portugal
517863-141 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in
Turkey
46 Chapter 3 Illustrated parts catalog
Spare part
number
Description
517863-161 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in Latin
America
517863-211 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in
Hungary
517863-221 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in the
Czech Republic
517863-251 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in
Russia
517863-A41 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in
Belgium
517863-AB1 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in
Taiwan
517863-B31 Keyboard, Moonlight White, IMR, molded keyboar keyboard cable), for used characters (includes
International use
517863-BB1 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in Israel
517863-DJ1 Keyboard, Moonlight White, IMR, molded keyboard characters (includes keyboard cable), for use in
Denmark, Norway, and Sweden
517864-001 Keyboard for use in the United States, Moonlight White, painted keyboard characters
517864-031 Keyboard for use in the United Kingdom, Moonlight White, painted keyboard characters
517864-041 Keyboard for use in Germany, Moonlight White, painted keyboard characters
517864-051 Keyboard for use in France, Moonlight White, painted keyboard characters
517864-061 Keyboard for use in Italy, Moonlight White, painted keyboard characters
517864-071 Keyboard for use in Spain, Moonlight White, painted keyboard characters
517864-111 Keyboard for use in Switzerland, Moonlight White, painted keyboard characters
517864-121 Keyboard for use in French Canada, Moonlight White, painted keyboard characters
517864-131 Keyboard for use in Portugal, Moonlight White, painted keyboard characters
517864-141 Keyboard for use in Turkey, Moonlight White, painted keyboard characters
517864-161 Keyboard for use in Latin America, Moonlight White, painted keyboard characters
517864-171 Keyboard for use in Saudi Arabia, Moonlight White, painted keyboard characters
517864-211 Keyboard for use in Hungary, Moonlight White, painted keyboard characters
517864-221 Keyboard for use in the Czech Republic, Moonlight White, painted keyboard characters
517864-251 Keyboard for use in Russia, Moonlight White, painted keyboard characters
517864-281 Keyboard for use in Thailand, Moonlight White, painted keyboard characters
517864-291 Keyboard for use in Japan, Moonlight White, painted keyboard characters
517864-A41 Keyboard for use in Belgium, Moonlight White, painted keyboard characters
517864-AB1 Keyboard for use in Taiwan, Moonlight White
517864-AD1 Keyboard for use in South Korea, Moonlight White, painted keyboard characters
Sequential part number listing 47
Spare part
number
Description
518764-B31 Keyboard for international use, Moonlight White, painted keyboard characters
517864-BB1 Keyboard for use in Israel, Moonlight White, painted keyboard characters
517864-DH1 Keyboard for use in Denmark, Norway, and Sweden, Moonlight White, painted keyboard characters
517864-DJ1 Keyboard for use in Greece, Moonlight White, painted keyboard characters
518108-001 Top cover for use with computer models equipped with fingerprint reader, Moonlight White (includes
TouchPad and TouchPad buttons, and speaker assembly)
518109-001 Top cover for use with computer models not equipped with fingerprint reader, Moonlight White (includes
TouchPad and TouchPad buttons, and speaker assembly)
518110-001 Switch cover (includes LED board and cable), Moonlight White (replaced with 571747–001 on select
models)
518431-001 System board for use with computer models equipped with ATI Mobility Radeon HD 4650 graphics with
1 GB memory (includes replacement thermal material)
518432-001 System board for use with computer models equipped with ATI Mobility Radeon HD 4530 graphics with
512 MB memory (includes replacement thermal material)
518433-001 System board for use with computer models equipped with UMA graphics and GM47 chipset (includes
replacement thermal material)
518435-001 Fan/heat sink assembly for use only with computer models equipped with ATI Mobility Radeon HD4650
graphics (includes replacement thermal material)
518771-001 16.0-inch WXGA BrightView display assembly with low light VGA webcam and 2 microphones, Espresso
Black (replaced with 571740–001)
518772-001 16.0-inch WXGA AntiGlare display assembly with low light VGA webcam and 2 microphones, Espresso
Black (replaced with 571741–001)
518773-001 Display enclosure for 16-inch BrightView displays (includes wireless antenna transceivers and cables and
logo LED board and cable), Espresso Black
518774-001 Display enclosure for 16-inch AntiGlare displays (includes wireless antenna transceivers and cables),
Espresso Black
518775-001 15.6-inch WXGA AntiGlare display assembly with webcam and 2 microphones, Moonlight White (replaced
with 517774–001)
518776-001 15.6-inch WXGA AntiGlare display assembly with webcam and 2 microphones, Espresso Black (replaced
with 571745–001)
518777-001 15.6-inch WXGA BrightView display assembly with webcam and 2 microphones, Espresso Black
(replaced with 571746–001)
518778-001 Top cover for use only with computer models not equipped with a fingerprint reader (includes TouchPad
and TouchPad buttons and speaker assembly), Espresso Black
518788-001 Top cover for use only with computer models equipped with a fingerprint reader (includes TouchPad and
TouchPad buttons and speaker assembly), Espresso Black
518790-001 Switch cover (includes LED board and cable), Espresso Black (replaced with 571757–001 on select
models)
518965-001 Keyboard for use in the United States, Espresso Black, molded keyboard characters
518965-031 Keyboard for use in the United Kingdom, Espresso Black, molded keyboard characters
518965-041 Keyboard for use in Germany, Espresso Black, molded keyboard characters
48 Chapter 3 Illustrated parts catalog
Spare part
number
Description
518965-051 Keyboard for use in France, Espresso Black, molded keyboard characters
518965-061 Keyboard for use in Italy, Espresso Black, molded keyboard characters
518965-071 Keyboard for use in Spain, Espresso Black, molded keyboard characters
518965-111 Keyboard for use in Switzerland, Espresso Black, molded keyboard characters
518965-131 Keyboard for use in Portugal, Espresso Black, molded keyboard characters
518965-141 Keyboard for use in Turkey, Espresso Black, molded keyboard characters
518965-161 Keyboard for use in Latin America, Espresso Black, molded keyboard characters
518965-211 Keyboard for use in Hungary, Espresso Black, molded keyboard characters
518965-221 Keyboard for use in the Czech Republic, Espresso Black, molded keyboard characters
518965-251 Keyboard for use in Russia, Espresso Black, molded keyboard characters
518965-A41 Keyboard for use in Belgium, Espresso Black, molded keyboard characters
518965-AB1 Keyboard for use in Taiwan, Espresso Black, molded keyboard characters
518965-B31 Keyboard for use Internationally, Espresso Black, molded keyboard characters
518965–BB1 Keyboard for use in Israel, Espresso Black, molded keyboard characters
518965-DJ1 Keyboard for use in Greece, Espresso Black, molded keyboard characters
518966-121 Keyboard for use in French Canada, Espresso Black, painted keyboard characters
518966-171 Keyboard for use in Saudi Arabia, Espresso Black, painted keyboard characters
518966-281 Keyboard for use in Thailand, Espresso Black, painted keyboard characters
518966-291 Keyboard for use in Japan, Espresso Black, painted keyboard characters
518966-AD1 Keyboard for use in South Korea, Espresso Black, painted keyboard characters
518966-DH1 Keyboard for use in Denmark, Norway, and Sweden, Espresso Black, painted keyboard characters
519209-001 Display Hinge Kit for use only with computer models equipped with 15.6-inch AntiGlare display panels
(includes left and right hinges)
534419-001 Intel Celeron 900 2.20-GHz with 1-MB L2 cache and 667-MHz FSB
570036-001 Intel Core Duo P8800 2.66-GHz with 3-MB L2 cache and 1066-MHz FSB
570228-001 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in the United States
570228-031 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in the United Kingdom
570228-041 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Germany
570228-051 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in France
570228-061 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Italy
570228-071 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Spain
570228-111 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Switzerland
570228-121 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in French Canada
570228-131 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Portugal
Sequential part number listing 49
Spare part
number
Description
570228-141 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Turkey
570228-161 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Latin America
570228-171 Keyboard, Espresso Black (includes keyboard cable), for use in Saudi Arabia
570228-211 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Hungary
570228-221 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in the Czech Republic
570228-251 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Russia
570228-281 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Thailand
570228-291 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Japan
570228-A41 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Belgium
570228-AB1 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Taiwan
570228-AD1 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in South Korea
570228-B31 Espresso Textured Keyboard, Espresso Black (i for International usencludes keyboard cable),
570228-BB1 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Israel
570228-DH1 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Denmark, Norway,
and Sweden
570228-DJ1 Espresso Textured Keyboard, Espresso Black (includes keyboard cable), for use in Greece
570434-001 Intel Core2 Duo T9900 3.06-GHz with 6-MB L2 cache and 1066-MHz FSB
571738-001 16.0-inch WXGA BrightView display assembly with standard VGA webcam and 2 microphones, Moonlight
White (replaces 512357–001)
571739-001 16.0-inch WXGA AntiGlare display assembly with standard VGA webcam and 2 microphones, Moonlight
White (replaces 512358–001)
571740-001 16.0-inch WXGA BrightView display assembly with standard VGA webcam and 2 microphones, Espresso
Black (replaces 518771–001)
571741-001 16.0-inch WXGA AntiGlare display assembly with standard VGA webcam and 2 microphones, Espresso
Black (replaces 518772–001)
571742-001 Webcam/microphone module, standard VGA (includes cable) (replaces 518727–001)
571743-001 15.6-inch WXGA BrightView display assembly with standard VGA webcam and 2 microphones, Moonlight
White (replaces 518762–001)
571744-001 15.6-inch WXGA AntiGlare display assembly with standard VGA webcam and 2 microphones, Moonlight
White (replaces 518775–001)
571745-001 15.6-inch WXGA BrightView display assembly with standard VGA webcam and 2 microphones, Espresso
Black (replaces 518776–001)
571746-001 15.6-inch WXGA AntiGlare display assembly with standard VGA webcam and 2 microphones, Espresso
Black (replaces 518777–001)
571747-001 Switch cover, Moonlight White (includes LED board and cable) (replaces 518110–001 for select models
only)
571757-001 Switch cover, Espresso Black (includes LED board and cable) (replaces 518790–001 for select models
only)
572928-001 Intel Core2 Duo T6500 2.10-GHz with 2-MB L2 cache and 800-MHz FSB
50 Chapter 3 Illustrated parts catalog
Spare part
number
Description
572929-001 Intel Pentium Dual-Core T4300 2.10-GHz with 1-MB L2 cache and 800-MHz FSB
573076-001 Intel Core Duo P7550 2.13-GHz with 3-MB L2 cache and 1066-MHz FSB
Sequential part number listing 51
4 Removal and replacement procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●Non-magnetic screwdriver
●Phillips P0 and P1 screwdrivers
●Flat-bladed screwdriver
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use
care when handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
52 Chapter 4 Removal and replacement procedures
Cables and connectors
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat
or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In
all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with extreme
care; these cables tear easily.
Drive handling
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the
computer, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on, and then shut it down through the operating
system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and
be sure that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
Preliminary replacement requirements 53
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated circuits provide some protection,
but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a
normal cycle. Or the device may function normally for a while, then degrade in the internal layers,
reducing its life expectancy.
CAUTION: To prevent damage to the computer when you are removing or installing internal
components, observe these precautions:
Keep components in their electrostatic-safe containers until you are ready to install them.
Use nonmagnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines described
in this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity affects the electrostatic voltage levels generated by different
activities.
CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event 10% 40% 55%
Walking across carpet 35,000 V 15,000 V 7,500 V
Walking across vinyl floor 12,000 V 5,000 V 3,000 V
Motions of bench worker 6,000 V 800 V 400 V
Removing DIPS from plastic tube 2,000 V 700 V 400 V
Removing DIPS from vinyl tray 11,500 V 4,000 V 2,000 V
Removing DIPS from Styrofoam 14,500 V 5,000 V 3,500 V
Removing bubble pack from PCB 26,500 V 20,000 V 7,000 V
Packing PCBs in foam-lined box 21,000 V 11,000 V 5,000 V
54 Chapter 4 Removal and replacement procedures
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.
●Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●Place items on a grounded surface before removing items from their containers.
●Always be properly grounded when touching a component or assembly.
●Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive
foam.
●Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that
mechanized equipment used for moving materials is wired to ground and that proper materials are
selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate
electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
●Cover the workstation with approved static-shielding material.
●Use a wrist strap connected to a properly grounded work surface and use properly grounded tools
and equipment.
●Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe
materials.
●Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and
Styrofoam.
●Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle
these items only at static-free workstations.
●Avoid contact with pins, leads, or circuitry.
●Turn off power and input signals before inserting or removing connectors or test equipment.
Preliminary replacement requirements 55
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps
with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground,
wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors,
use alligator clips to connect a wrist strap.
●When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps)
can be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one
megohm resistance between the operator and ground. To be effective, the conductive strips must
be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●Antistatic tape
●Antistatic smocks, aprons, and sleeve protectors
●Conductive bins and other assembly or soldering aids
●Nonconductive foam
●Conductive tabletop workstations with ground cords of one megohm resistance
●Static-dissipative tables or floor mats with hard ties to the ground
●Field service kits
●Static awareness labels
●Material-handling packages
●Nonconductive plastic bags, tubes, or boxes
●Metal tote boxes
●Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
Material Use Voltage protection level
Antistatic plastic Bags 1,500 V
Carbon-loaded plastic Floor mats 7,500 V
Metallized laminate Floor mats 5,000 V
56 Chapter 4 Removal and replacement procedures
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 90 screws, in 10 different sizes, that must be removed, replaced, or loosened
when servicing the computer. Make special note of each screw size and location during removal and
replacement.
Service tag
When ordering parts or requesting information, provide the computer serial number and model
description provided on the service tag.
(1) Product name: This is the product name affixed to the front of the computer.
(2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product.
(3) Part number/Product number (p/n): This number provides specific information about the product's
hardware components. The part number helps a service technician to determine what components and
parts are needed.
(4) Model description: This is the alphanumeric identifier needed to locate documents, drivers, and
support for the computer.
(5) Warranty period: This number describes the duration of the warranty period for the computer.
Component replacement procedures 57
Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Feet Kit, spare
part number 516499-001. There are 4 rubber feet that attach to the base enclosure in the locations
illustrated below.
58 Chapter 4 Removal and replacement procedures
Battery
Description Spare part number
12-cell, 95-Wh, 8.8-Ah Li-ion battery for use with all computer models 511884-001
6-cell, 55-Wh, 2.55-Ah Li-ion battery for use with all computer models 511872-001
6-cell, 55-Wh, 2.55-Ah Li-ion battery for use only with computer for Germany 511872-002
6-cell, 47-Wh, 2.55-Ah Li-ion battery for use with all computer models 511883-001
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
Remove the battery:
1. Turn the computer upside down on a flat surface.
2. Slide the battery release latch (1) to release the battery.
3. Pivot the battery (2) upward and remove it from the computer (3).
To insert the battery, insert the rear edge of the battery into the battery bay and pivot the front edge of
the battery downward until it is seated. The battery release latch automatically locks the battery into
place.
Component replacement procedures 59
Webcam/microphone module
NOTE: This section applies only to computer models equipped with BrightView display assemblies.
See Display assemblyon page 81 for webcam/microphone module removal instructions for computer
models equipped with AntiGlare display assemblies.
NOTE: If it has been determined that the webcam/microphone module is the component that must be
replaced to complete the computer repair, the display assembly does not have to be removed. Follow
the procedures in this section to replace the webcam/microphone module. For information on replacing
the display assembly and other display assembly internal components, see Display assembly
on page 81.
Description Spare part number
Webcam/microphone module for use only with computer models equipped with BrightView display
assemblies (includes double-sided tape) (replaced by 571742–001)
512827-001
Webcam/microphone module for use only with computer models equipped with BrightView display
assemblies (includes double-sided tape) (replaces 512827-001)
571742–001
Before removing the webcam/microphone module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 59).
Remove the webcam/microphone module:
1. Turn the computer display-side up, with the front toward you.
2. Open the computer as far as possible.
3. Flex the inside edges of the top edge (1) and the left and right upper corners (2) of the display bezel
until the bezel disengages from the display enclosure.
60 Chapter 4 Removal and replacement procedures
4. Release the display bezel top edge (3) from the display enclosure.
5. Release the webcam/microphone module (1) from the display enclosure as far as the webcam/
microphone module cable allows.
6. Disconnect the webcam/microphone module cable (2) from the webcam/microphone module.
7. Remove the webcam/microphone module.
Reverse this procedure to install the webcam/microphone module.
Component replacement procedures 61
Optical drive
NOTE: The optical drive spare part kit includes an optical drive bezel and bracket.
Description Spare part number
Blu-ray ROM DVD±R/RW SuperMulti Double-Layer Drive 511881-001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive 511882-001
DVD±RW SuperMulti Double-Layer Combo Drive 511880-001
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 59).
Remove the optical drive:
1. Position the computer with the front toward you.
2. Remove the Phillips PM2.5×6.5 screw (1) that secures the optical drive to the computer.
3. Insert a thin tool, such as a paper clip, into the disc tray release access hole (2). (The optical drive
disc tray is partially ejected from the optical drive.)
4. Use the disc tray frame to slide the optical drive (3) out of the computer.
5. Remove the optical drive.
6. If it is necessary to replace the optical drive bracket, position the optical drive with the optical drive
bracket toward you.
62 Chapter 4 Removal and replacement procedures
7. Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical
drive.
8. Remove the optical drive bracket (2).
Reverse this procedure to reassemble and install the optical drive.
Component replacement procedures 63
Memory module
Description Spare part number
DDR2, 800-MHz, PC2-6400, 1-DIMM:
4 GB 511871-001
2 GB 511870-001
1 GB 511869-001
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 59).
Remove the memory module:
1. Position the computer with the front toward you.
2. Loosen the four Phillips PM2.5×5.5 captive screws (1) that secure the memory module
compartment cover to the computer.
3. Lift the rear edge (2) of the cover, swing it up and to the front, and remove the cover (3). The
memory module compartment cover is included in the Plastics Kit, spare part number
511890-001.
4. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
64 Chapter 4 Removal and replacement procedures
NOTE: If necessary, use a non-conductive pointed tool to spread the retaining tabs.
5. Remove the module (2) by pulling it away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the
memory module slot.
Reverse this procedure to install a memory module.
Component replacement procedures 65
TV tuner module
NOTE: The TV tuner module spare part kit does not include a TV tuner module cable. The TV tuner
module cable is included in the Cable Kit, spare part number 512832-001.
NOTE: The TV tuner external antenna cables are available using spare part numbers 482900-001
(with F-PAL jack) and 482900-002 (with PAL jack).
Description Spare part number
DVB-T TV tuner module (for use only with computers equipped with discrete graphics memory) 482899-003
DVB-T/ANG TV tuner module 482899-002
NTSC/ATSC/ANG hybrid TV tuner module 482899-001
TV tuner external antenna cable with F-PAL jack 482900–001
TV tuner external antenna cable with PAL jack 482900–002
Before removing the TV tuner module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the memory module compartment cover (see Memory module on page 64).
Remove the TV tuner module:
1. Disconnect the TV tuner module antenna cable (1) from the terminal on the TV tuner module.
2. Remove the Phillips PM2.0×3.0 screw (2) that secures the TV tuner module to the computer.
66 Chapter 4 Removal and replacement procedures
3. Lift the edge of the TV tuner module (3), and pull the module away from the slot at an angle.
NOTE: The TV tuner module is designed with a notch (4) to prevent incorrect insertion into the
TV tuner module slot.
Reverse this procedure to install the TV tuner module.
RTC battery
Description Spare part number
RTC battery 449729-001
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the memory module compartment cover (see Memory module on page 64).
Remove the RTC battery:
Component replacement procedures 67
Use a non-conductive pointed tool to pry the RTC battery from the socket on the system board.
Reverse this procedure to install the RTC battery. Be sure that the RTC battery is installed with the “+”
sign facing up.
68 Chapter 4 Removal and replacement procedures
Hard drive
NOTE: The hard drive spare part kit includes left and right bracket rails, a connector cable, Mylar cover
with tab, and 4 rubber isolators.
Description Spare part number
160 GB, 5400 rpm 511873-001
250 GB, 7200 rpm (select models only) 511874-001
250 GB, 5400 rpm 511875-001
320 GB, 7200 rpm (select models only) 511876-001
320 GB, 5400 rpm 511877-001
400 GB, 5400 rpm 511878-001
500 GB, 5400 rpm (select models only) 511879-001
Hard Drive Hardware Kit (includes left and right bracket rails, connector cable, Mylar cover with
tab, and 4 rubber isolators)
483862-001
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 59).
Remove the hard drive:
1. Position the computer with the front toward you.
2. Loosen the two Phillips PM2.5×5.5 captive screws (1) that secure the hard drive bay cover to the
computer.
Component replacement procedures 69
3. Lift the right side (2) of the hard drive bay cover, swing it up and to the left, and remove the
cover (3). The hard drive bay cover is included in the Plastics Kit, spare part number
511890-001.
4. Use the Mylar tab (1) to lift the hard drive up, and then slide it to the left (2) to release it from the
hard drive bay.
5. Disconnect the hard drive cable (3) from the system board.
6. Remove the hard drive from the hard drive bay.
70 Chapter 4 Removal and replacement procedures
7. If it is necessary to replace the hard drive bracket or any of the hard drive bracket components,
remove the following:
(1) Hard drive connector cable
(2) Four rubber isolators
(3) Four Phillips PM3.0×3.5 screws that secure the hard drive bracket rails and Mylar cover to the
hard drive
(4) Left and right hard drive bracket rails with mylar cover tabs
Reverse this procedure to reassemble and install the hard drive.
Component replacement procedures 71
WLAN module
Description Spare part number
Intel Wi-Fi Link 5100 802.11a/b/g/n WLAN module for use with computer models in all countries
and regions (Bluetooth supported)
480985-001
Intel Wi-Fi Link 5100 802.11a/b/g WLAN module for use with computer models in all countries and
regions (Bluetooth supported)
482957-001
Broadcom 4322 802.11a/b/g/n WLAN module for use only with computer models in
Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico,
Trinidad and Tobago, the U.S. Virgin Islands, and the United States (Bluetooth supported)
487330-001
Broadcom 4322 802.11a/b/g/n WLAN module for use only with computer models in Afghanistan,
Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde,
the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea,
Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana,
Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast,
Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman,
Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis,
St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe (Bluetooth supported)
487330-002
Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in
Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico,
Trinidad and Tobago, the U.S. Virgin Islands, and the United States (Bluetooth supported)
459263-001
72 Chapter 4 Removal and replacement procedures
Description Spare part number
Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Afghanistan,
Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde,
the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea,
Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana,
Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast,
Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman,
Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis,
St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe (Bluetooth supported)
459263-002
Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in
Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico,
Trinidad and Tobago, the U.S. Virgin Islands, and the United States (Bluetooth supported)
504593-001
Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Afghanistan,
Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde,
the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea,
Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana,
Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast,
Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman,
Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis,
St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe (Bluetooth supported)
504593-002
Component replacement procedures 73
Description Spare part number
Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in
Antigua and Barbuda, Barbados, Belize, Canada, the Cayman Islands, Guam, Puerto Rico,
Trinidad and Tobago, the U.S. Virgin Islands, and the United States (Bluetooth supported)
504664-001
Broadcom BCM4312 802.11b/g WLAN module for use only with computer models in Afghanistan,
Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde,
the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea,
Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana,
Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast,
Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman,
Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis,
St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe (Bluetooth supported)
504664-002
Before removing the WLAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the hard drive (see Hard drive on page 69).
Remove the WLAN module:
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless
module authorized for use in the computer by the governmental agency that regulates wireless devices
in your country or region. If you replace the module and then receive a warning message, remove the
module to restore computer functionality, and then contact technical support through Help and Support.
1. Disconnect the WLAN antenna cables (1) from the WLAN module.
NOTE: The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The
white WLAN antenna cable is connected to the WLAN module “Aux” terminal.
2. Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the computer. (The
edge of the module opposite the slot rises away from the computer.)
74 Chapter 4 Removal and replacement procedures
3. Remove the WLAN module (3) by pulling it away from the slot at an angle.
NOTE: WLAN modules are designed with a notch (4) to prevent incorrect insertion into the WLAN
module slot.
Reverse this procedure to install a WLAN module.
Component replacement procedures 75
Switch cover and keyboard
Description Spare part number
Switch cover (includes LED board and cable), Onyx 512829-001
Switch cover (includes LED board and cable), Moonlight White (replaced by 571747–001 on select
models)
518110-001
Switch cover (includes LED board and cable), Moonlight White (replaces 571747–001 for select
models only)
571747–001
Switch cover (includes LED board and cable), Espresso Black (replaced by 571957–001 on select
models)
518790-001
Switch cover (includes LED board and cable), Espresso Black (replaces 5718790–001 for select
models only)
571957–001
Keyboards
For a list of all keyboards available for your country or region, see pages 23 to 26.
Before removing the switch cover and keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 59).
Remove the switch cover and keyboard:
1. Position the computer upside down with the front toward you.
76 Chapter 4 Removal and replacement procedures
2. Remove the following screws:
(1) Two Phillips PM2.5×6.5 screws that secure the switch cover to the computer
(2) Three Phillips PM2.5×4.0 screws that secure the switch cover to the computer (these are inside
the battery bay)
(3) Four Phillips PM2.5×6.5 screws that secure the keyboard to the computer
3. Turn the computer display-side up, with the front toward you.
4. Open the computer as far as possible.
5. Lift the rear edge of the switch cover until it detaches from the computer.
Component replacement procedures 77
6. Move the switch cover back so it rests on the display.
7. Remove the three Phillips PM2.0×3.0 screws that secure the keyboard to the computer.
8. Lift the rear edge (1) of the keyboard .
9. Slide the keyboard (2) back until the keyboard connector on the system board is accessible.
78 Chapter 4 Removal and replacement procedures
10. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is connected and
disconnect the cable (2) from the system board.
11. Remove the keyboard.
12. Disconnect the power button board cable (1) from the low insertion force (LIF) connector on the
system board.
13. Disconnect the LED board cable (2) from the LIF connector on the system board.
14. Remove the switch cover.
Reverse this procedure to install the switch cover and keyboard.
Component replacement procedures 79
Power button board
Description Spare part number
Power button board for computers with discrete graphics subsystem memory (includes cable) 512835–001
Power button board for computers with UMA graphics subsystem memory (includes cable) 512834-001
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the switch cover and keyboard (see Switch cover and keyboard on page 76).
Remove the power button board:
1. Turn the switch cover upside down with the front toward you.
2. Remove the Phillips PM2.5×4.0 screw (1) that secures the power button board to the switch cover.
3. Remove the power button board (2) and cable.
Reverse this procedure to install the power button board.
80 Chapter 4 Removal and replacement procedures
Display assembly
NOTE: The display assembly includes a webcam, 2 microphones, and 2 wireless antenna transceivers
and cables.
Description Spare part number
15.6-inch WXGA BrightView display assembly, Onyx 511867-001
15.6-inch WXGA BrightView display assembly with low light VGA webcam, Moonlight White
(replaced by 571743-001)
517862-001
15.6-inch WXGA BrightView display assembly with standard VGA webcam and 2 microphones,
Moonlight White (replaces 517862-001)
571743-001
15.6-inch WXGA BrightView display assembly with low light VGA webcam, Espresso Black
(replaced by 571745-001)
518776-001
15.6-inch WXGA BrightView display assembly with webcam and 2 microphones, Espresso Black
(replaces 518776-001)
571745-001
15.6-inch WXGA AntiGlare display assembly, Moonlight White (replaced by 571744–001) 518775-001
15.6-inch WXGA AntiGlare display assembly, Moonlight White (replaces 518775-001) 571744–001
15.6-inch WXGA AntiGlare display assembly with low light VGA webcam, Espresso Black (replaced
by 571746-001)
518777–001
15.6-inch WXGA AntiGlare display assembly with standard VGA webcam, Espresso Black (replaces
518777–001)
571746-001
16.0-inch WXGA BrightView display assembly, Onyx 511865–001
16.0-inch WXGA BrightView display assembly with low light VGA webcam , Moonlight White
(replaced by 571738–001)
512357-001
16.0-inch WXGA BrightView display assembly with standard VGA webcam, Moonlight White
(replaces 512357-001)
571738–001
16.0-inch WXGA BrightView display assembly with low light VGA webcam, Espresso Black
(replaced by 571740–001)
518771–001
16.0-inch WXGA BrightView display assembly with standard VGA webcam, Espresso Black
(replaces 518771–001)
571740–001
16.0-inch WXGA AntiGlare display assembly, Onyx 511866–001
16.0-inch WXGA AntiGlare display assembly with low light VGA webcam, Moonlight White (replaced
by 571739–001)
512358-001
16.0-inch WXGA AntiGlare display assembly with standard VGA webcam, Moonlight White
(replaces 512358-001)
571739–001
16.0-inch WXGA AntiGlare display assembly with low light VGA webcam, Espresso Black (replaced
by 571741–001)
518772–001
16.0-inch WXGA AntiGlare display assembly with standard VGA webcam, Espresso Black (replaces
518772–001)
571741–001
Component replacement procedures 81
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 72).
6. Remove the switch cover and keyboard (see Switch cover and keyboard on page 76).
Remove the display assembly:
1. Disconnect the display panel cable (1) and the webcam/microphone cable (2) from the system
board.
2. Remove the WLAN antenna cables from the clip (3) built into the top cover.
CAUTION: Support the display assembly when removing the following screws. Failure to support
the display assembly can result in damage to the display assembly and other computer
components.
3. Remove the four Phillips PM2.5×6.5 screws (1) that secure the display assembly to the computer.
82 Chapter 4 Removal and replacement procedures
4. Remove the display assembly (2).
NOTE: Steps 5 through 22 provide display assembly internal component removal information for
computer models equipped with AntiGlare display assemblies. See steps 23 through 33 for display
assembly internal component removal information for computer models equipped with BrightView
display assemblies.
NOTE: See Webcam/microphone moduleon page 60 for webcam/microphone module
replacement instructions for computer models equipped with BrightView display assemblies.
5. If it is necessary to replace the display enclosure or any of the display assembly internal
components, remove the following screw covers and screws:
a. (1) Four rubber screw covers on the display bezel bottom edge. The display rubber screw
covers are included in the Display Rubber Kit, spare part number 513479-001 (15.6-inch
displays) or 512361-001 (16.0-inch displays).
b. (2) Four Phillips PM2.5×5.0 screws.
6. Turn the display assembly upside down, with the bottom edge toward you.
7. Release the display enclosure by sliding the enclosure (1) toward the top of the display assembly.
8. Lift the display enclosure (2) as far as the display logo cable allows.
Component replacement procedures 83
9. Disconnect the display logo cable (3) from the display panel cable.
10. If it is necessary to replace the display inverter, remove the four Phillips PM2.5×5.0 screws (1) that
secure the display inverter cover to the display bezel.
11. Remove the display inverter cover (2) by lifting it straight up.
NOTE: You must remove the display inverter cover to free the antenna cables.
12. Remove the display enclosure. The display enclosure table below identifies the correct part to use
for each computer model.
Description Spare part number
BrightView display enclosure, Onyx (includes wireless antenna transceivers and cables
and logo LED board and cable) 16-inch
512824-001
BrightView display enclosure, Moonlight White (includes wireless antenna transceivers
and cables and logo LED board and cable) 15.6-inch
517860-001
84 Chapter 4 Removal and replacement procedures
BrightView display enclosure, Espresso Black (includes wireless antenna transceivers
and cables and logo LED board and cable) 16-inch
518773-001
AntiGlare display enclosure, Onyx (includes wireless antenna transceivers and cables)
16-inch
513478-001
AntiGlare display enclosure, Moonlight White (includes wireless antenna transceivers
and cables) 16-inch
517861-001
AntiGlare display enclosure, Espreso Black (includes wireless antenna transceivers and
cables) 16-inch
518774-001
AntiGlare display enclosure, Moonlight White (includes wireless antenna transceivers
and cables) 15.6-inch (replaced by 571744–001)
518775-001
AntiGlare display enclosure, Moonlight White (includes wireless antenna transceivers
and cables) 15.6-inch (replaces 518775-001)
571744–001
AntiGlare display enclosure, Espreso Black (includes wireless antenna transceivers and
cables) 15.6-inch
518777-001
13. If it is necessary to replace the webcam/microphone module, release the webcam/microphone
module (1) as far as the webcam/microphone module cable allows.
14. Disconnect the webcam/microphone module cable (2) from the webcam/microphone module.
15. Remove the webcam/microphone module. The webcam/microphone module is available using
spare part number 512827-001.
16. Release the display inverter (1) as far from the display bezel as the display panel cable and
backlight cable allow.
Component replacement procedures 85
22. Remove the display hinge (2). The display hinge is available in the Display Hinge Kit, spare part
number 513477-001 (16-inch display) or 519209-001 (15.6-inch display).
NOTE: Steps 23 through 33 provide display assembly internal component removal information
for computer models equipped with BrightView display assemblies. See steps 5 through 22 for
display assembly internal component removal information for computer models equipped with
AntiGlare display assemblies.
NOTE: See Webcam/microphone moduleon page 60 for webcam/microphone module
replacement instructions for computer models equipped with BrightView display assemblies.
23. If it is necessary to replace the display bezel or any of the display assembly internal components,
remove the following screw covers and screws: Two rubber screw covers on the display bezel
bottom edge (1). Two Phillips PM2.5×6.5 screws (2). The display rubber screw covers are included
in the Display Rubber Kit, spare part number 512361-001.
24. Flex the inside edges of the top edge (1) (2), the left and right sides , and the bottom edge (3) of
the display bezel until the bezel disengages from the display enclosure.
Component replacement procedures 87
25. Remove the display bezel (4). The display bezel is available using spare part number 512359-001
(16-inch display) or 512364-001 (15.6-inch display).
26. If it is necessary to replace the display inverter, release the display inverter (1) as far from the
display enclosure as the display panel cable and backlight cable allow.
27. Disconnect the display panel cable (2) and the backlight cable (3) from the display inverter.
28. Remove the display inverter. The display inverter is available using spare part number
488317-001.
88 Chapter 4 Removal and replacement procedures
29. If it is necessary to replace the display panel, remove the two Phillips PM2.5×5.0 screws (1) from
the top corners and the six Phillips PM2.5×5.0 screws (2) from the display hinges.
30. Flex the bottom (1) of the display panel back and release the display hinges. Disconnect the display
LED cable (2) from the display panel cable. Remove the display panel (3). Display panels are
available using spare part number 511868-001 (16-inch WXGA BrightView display panel) or
512363-001 (15.6-inch WXGA BrightView display panel).
31. If it is necessary to replace the display hinges, remove the two Phillips PM2.0×3.0 screws (1) that
secure each display hinge to the display panel.
Component replacement procedures 89
32. Remove the display hinges (2). The display hinges are available in the Display Hinge Kit, spare
part 512360-001 (16-inch display) or 512365-001 (15.6-inch display). The display hinge screws
are available in the Display Screw Kit, spare part number 512362-001.
33. If it is necessary to remove the display panel cable, remove the adhesive reinforcement strip (1)
from the display panel cable, and disconnect the display panel cable from the top of the display
panel (2) (3). Remove the tape that secures the cable to the display panel. The display panel cable
is available using spare part number 512825-001.
Reverse this procedure to reassemble and install the display assembly.
90 Chapter 4 Removal and replacement procedures
3. Remove one Phillips PM2.5×4.0 screw (2) that secures the top cover to the computer. This screw
is in the battery bay.
4. Turn the computer right-side up, with the front toward you.
5. Disconnect the following cables from the system board:
(1) TouchPad cable
NOTE: On computer models equipped with a standard display assembly, this cable connects to
a ZIF connector on the system board. On computer models equipped with a Flush Glass display
assembly, this cable connects to a LIF connector on the system board.
(2) Fingerprint reader board cable
NOTE: This cable connects to a LIF connector on the system board.
(3) Speaker cable
NOTE: Step 6 applies only to computer models equipped with standard display assemblies.
92 Chapter 4 Removal and replacement procedures
6. Remove the five Phillips PM2.5× re the top cover 4.0 screws that secu to the computer.
7. Lift the rear edge (1) of the top cover until it rests at an angle.
8. Remove the top cover (2) by lifting it straight up.
Reverse this procedure to install the top cover.
Component replacement procedures 93
Bluetooth module
NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is available using spare part number 489822-001.
Description Spare part number
Bluetooth module 483113-001
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the switch cover and keyboard (see Switch cover and keyboard on page 76).
Remove the Bluetooth module:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the Bluetooth module to the top cover.
2. Release the Bluetooth module (2) as far from the top cover as the Bluetooth module cable allows.
3. Disconnect the Bluetooth module cable (3) from the Bluetooth module.
4. Remove the Bluetooth module.
Reverse this procedure to install the Bluetooth module.
94 Chapter 4 Removal and replacement procedures
Modem module
NOTE: The modem module spare part kit does not include a modem module cable. The modem
module cable is included in the Cable Kit, spare part number 501891-001. See Cable Kit on page 38
for more Cable Kit spare part number information.
Description Spare part number
Modem module for use in all countries and regions except Australia and New Zealand 461749-001
For use only in Australia and New Zealand 461749-011
Before removing the modem module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the following components:
a. Hard drive (see Hard drive on page 69).
b. Optical drive (see Optical drive on page 62).
c. Switch cover and keyboard (see Switch cover and keyboard on page 76).
d. Display assembly (see Display assembly on page 81).
e. Top cover (see Top cover on page 91).
Remove the modem module:
1. Disconnect the modem module cable (1) from the modem module.
2. Remove the two Phillips PM2.5×3.0 screws (2) that secure the modem module to the system board.
Component replacement procedures 95
3. Lift the modem module (3) straight up to disconnect it from the system board.
Reverse this procedure to install the modem module.
96 Chapter 4 Removal and replacement procedures
Audio/infrared board
Description Spare part number
Audio/infrared board for use with computer models equipped with discrete graphics memory
(includes cable)
512836-001
Audio/infrared board for use with computer models equipped with UMA graphics memory (includes
cable)
511892-001
Before removing the audio/infrared board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the following components:
a. Hard drive (see Hard drive on page 69).
b. Optical drive (see Optical drive on page 62).
c. Switch cover and keyboard (see Switch cover and keyboard on page 76).
d. Display assembly (see Display assembly on page 81).
e. Top cover (see Top cover on page 91).
Remove the audio/infrared board:
1. Disconnect the audio/infrared board cable (1) from the LIF connector on the system board.
2. Remove one Phillips PM2.5x3.0 screw (2).
3. Release the clip (3) built into the base enclosure that secures the audio/infrared board.
Component replacement procedures 97
4. Lift the audio/infrared board (4) straight up to remove it from the base enclosure.
Reverse this procedure to install the audio/infrared board.
USB board
Description Spare part number
USB board for use with computer models equipped with graphics subsystems with UMA graphics
memory (includes cable)
516497-001
USB board for use with computer models equipped with graphics subsystems with discrete
graphics memory (includes cable)
516855-001
Before removing the USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the following components:
a. Hard drive (see Hard drive on page 69).
b. Optical drive (see Optical drive on page 62).
c. Switch cover and keyboard (see Switch cover and keyboard on page 76).
d. Display assembly (see Display assembly on page 81).
e. Top cover (see Top cover on page 91).
98 Chapter 4 Removal and replacement procedures
Remove the USB board:
1. Disconnect the USB board cable (1) from the LIF connector on the system board.
2. Remove the Phillips PM2.5×6.5 screw (2) that secures the USB board to the base enclosure.
3. Remove the USB board (3) from the base enclosure.
Reverse this procedure to install the USB board.
Power connector cable
NOTE: The power connector cable is available in the Cable Kit, spare part number 512832-001.
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the following components:
a. Hard drive (see Hard drive on page 69).
b. Optical drive (see Optical drive on page 62).
c. Switch cover and keyboard (see Switch cover and keyboard on page 76).
d. Display assembly (see Display assembly on page 81).
e. Top cover (see Top cover on page 91).
f. USB board (see USB board on page 98).
g. System board (see System board on page 101).
Component replacement procedures 99
Remove the power connector cable:
1. Remove the power connector cable (1) from the clips and routing channel built into the base
enclosure.
2. Remove the Phillips PM2.5×6.5 screw (2) that secures the power connector and bracket to the
base enclosure.
3. Remove the power connector bracket (3).
4. Remove the power connector cable (4).
Reverse this procedure to install the power connector cable.
100 Chapter 4 Removal and replacement procedures
System board
NOTE: The system board spare kit includes replacement thermal material.
Description Spare part number
For use with computer models equipped with discrete graphics subsystem memory 511864-001
For use with computer models equipped with UMA graphics subsystem memory 511863-001
For use with computer models equipped with ATI Mobility Radeon HD4650 graphics with 1-GB
memory
518431-001
For use with computer models equipped with ATI Mobility Radeon HD4530 graphics with 512-MB
memory
518432-001
For use with computer models equipped with UMA graphics and GM47 chipset 518433-001
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the following components:
a. Hard drive (see Hard drive on page 69)
b. Optical drive (see Optical drive on page 62)
c. Switch cover (see Switch cover and keyboard on page 76)
d. Display assembly (see Display assembly on page 81)
e. Top cover (see Top cover on page 91)
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●TV tuner module (see TV tuner module on page 66)
●RTC battery (see RTC battery on page 67)
●Memory module (see Memory module on page 64)
●WLAN module (see Bluetooth module on page 94)
●Modem module (see WLAN module on page 72)
●Fan/heat sink assembly (see Fan/heat sink assembly on page 105)
●Processor (see Processor on page 107)
Remove the system board:
Component replacement procedures 101
1. Disconnect the modem module cable (1) from the modem module.
2. Disconnect the following cables from the system board:
(2) Audio/infrared board cable
NOTE: The audio/infrared board cable connects to a LIF connector on the system board.
(3) USB board cable
NOTE: The USB board cable connects to a LIF connector on the system board.
(4) Power connector cable
3. Remove the Phillips PM2.5×6.5 screw (1) that secures the system board to the base enclosure.
4. Use the optical drive connector (2) to lift the right side of the system board until it rests at an angle.
5. Remove the system board (3) by sliding it up and to the right at an angle.
Reverse this procedure to install the system board.
102 Chapter 4 Removal and replacement procedures
TV tuner module cable
NOTE: The TV tuner module cable is available in the Cable Kit, spare part number 512832-001.
Before removing the TV tuner module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the following components:
a. Hard drive (see Hard drive on page 69).
b. Optical drive (see Optical drive on page 62).
c. Switch cover and keyboard (see Switch cover and keyboard on page 76).
d. Display assembly (see Display assembly on page 81).
e. Top cover (see Top cover on page 91).
f. USB board (see USB board on page 98).
g. System board (see System board on page 101).
Remove the TV tuner module cable:
1. Release the clips (1) built into the base enclosure that secure the TV tuner antenna connector.
2. Remove the TV tuner antenna connector (2) from the clip built into the base enclosure.
3. Remove the TV tuner module cable (3) from the clips and routing channel built into the base
enclosure.
Reverse this procedure to install the TV tuner module cable.
Component replacement procedures 103
Modem module cable
NOTE: The modem module cable is available in the Cable Kit, spare part number 512832-001. The
modem module cable includes the RJ-11 jack.
Before removing the modem module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the following components:
a. Hard drive (see Hard drive on page 69).
b. Optical drive (see Optical drive on page 62).
c. Switch cover and keyboard (see Switch cover and keyboard on page 76).
d. Display assembly (see Display assembly on page 81).
e. Top cover (see Top cover on page 91).
f. USB board (see USB board on page 98).
g. System board (see System board on page 101).
Remove the modem module cable:
1. Release the clips (1) built into the base enclosure that secure the RJ-11 jack.
2. Remove the RJ-11 jack (2) from the clip built into the base enclosure.
3. Remove the modem module cable (3) from the clips and routing channel built into the base
enclosure.
Reverse this procedure to install the modem module cable.
104 Chapter 4 Removal and replacement procedures
Fan/heat sink assembly
NOTE: The fan/heat sink assembly spare kit includes replacement thermal material.
Description Spare part number
For use only with computer models equipped with graphics subsystems with discrete memory 512837-001
For use only with computer models equipped with graphics subsystems with UMA memory 512830-001
For use only with computer models equipped with ATI Mobility Radeon HD4650 graphics
subsystems
518435–001
NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-in) clearance on the right side
and rear panel of the computer. The computer uses an electric fan for ventilation. The fan is controlled
by a temperature sensor and is designed to turn on automatically when high temperature conditions
exist. These conditions are affected by high external temperatures, system power consumption, power
management/battery conservation configurations, battery fast charging, and software requirements.
Exhaust air is displaced through the ventilation grill located on the left side of the computer.
Before removing the fan/heat sink assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the following components:
a. Hard drive (see Hard drive on page 69).
b. Optical drive (see Optical drive on page 62).
c. Switch cover and keyboard (see Switch cover and keyboard on page 76).
d. Display assembly (see Display assembly on page 81).
e. Top cover (see Top cover on page 91).
f. USB board (see USB board on page 98).
g. System board (see System board on page 101).
Remove the fan/heat sink assembly:
1. Turn the system board upside down, with the expansion port 3 and external monitor port toward
you.
2. Disconnect the fan cable (1) from the system board.
3. Loosen the three Phillips PM2.5×14.0 spring-loaded, captive screws (2) (3), , and (4) that secure
the fan/heat sink assembly to the system board.
Component replacement procedures 105
CAUTION: Remove the screws in the order indicated by the callouts to ensure consistent
pressure over the processor board.
4. Loosen the three Phillips PM2.5×5.0 captive screws (5), (6), and (7) that secure the fan/heat sink
assembly to the system board.
CAUTION: Remove the screws in the order indicated by the callouts to ensure consistent
pressure over the processor board.
5. Remove the fan/heat sink assembly (8).
NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it may be necessary to move the fan/heat sink assembly
from side to side to detach the assembly.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink
assembly and the system board each time the fan/heat sink assembly is removed. Thermal paste
is applied to the fan/heat sink assembly to correspond with components on the system board as
follows: the processor (1) and and (2), the Northbridge chip (3) (4), the graphics subsystem chip
(5) and (6) (7) (8), and three capacitors and . Replacement thermal material is included with all fan/
heat sink assembly, system board, and processor spare part kits.
Reverse this procedure to install the fan/heat sink assembly.
106 Chapter 4 Removal and replacement procedures
Processor
NOTE: The processor spare part kit includes thermal material.
Description Spare part number
Intel Core2 Duo T9900 3.06 GHz with 6-MB L2 cache and 1066-MHz FSB 507951-001
Intel Core2 Duo T9800 2.93 GHz with 6-MB L2 cache and 1066-MHz FSB 507951-001
Intel Core2 Duo T9600 2.80 GHz with 6-MB L2 cache and 1066-MHz FSB 507955-001
Intel Core2 Duo T9550 2.66 GHz with 6-MB L2 cache and 1066-MHz FSB 507953-001
Intel Core2 Duo T9400 2.53 GHz with 6-MB L2 cache and 1066-MHz FSB 507954-001
Intel Core2 Duo T6600 2.20 GHz with 2-MB L2 cache and 800-MHz FSB 513593-001
Intel Core2 Duo T6500 2.10 GHz with 2-MB L2 cache and 800-MHz FSB 572928–001
Intel Core2 Duo T6400 2.00 GHz with 2-MB L2 cache and 800-MHz FSB 513592-001
Intel Core2 Duo T5800 2.00 GHz with 2-MB L2 cache and 800-MHz FSB 515040-001
Intel Pentium Dual-Core T4300 2.10 GHz with 1-MB L2 cache and 800-MHz FSB 572929–001
Intel Pentium Dual-Core T4200 2.00 GHz with 1-MB L2 cache and 800-MHz FSB 513599-001
Intel Pentium Dual-Core T3400 2.16 GHz with 1-MB L2 cache and 1066-MHz FSB 509549–001
Intel Core Duo P8800 2.66 GHz with 3-MB L2 cache and 1066-MHz FSB 570036–001
Intel Core Duo P8700 2.53 GHz with 3-MB L2 cache and 1066-MHz FSB 507960-001
Intel Core Duo P8600 2.40 GHz with 3-MB L2 cache and 1066-MHz FSB 507961-001
Intel Core Duo P8400 2.26 GHz with 3-MB L2 cache and 1066-MHz FSB 507962-001
Intel Core Duo P7550 2.26 GHz with 3-MB L2 cache and 1066-MHz FSB 573076–001
Intel Core Duo P7450 2.13 GHz with 3-MB L2 cache and 1066-MHz FSB 507122-001
Intel Celeron 900 2.20-GHz with 1-MB L2 cache and 667-MHz FSB 534419-001
Intel Celeron T1600 1.66 GHz with 1-MB L2 cache and 667-MHz FSB (for use only with computers
equipped with UMA graphics memory subsystems)
501894-001
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 59).
5. Remove the following components:
a. Hard drive (see Hard drive on page 69).
b. Optical drive (see Optical drive on page 62).
Component replacement procedures 107
c. Switch cover and keyboard (see Switch cover and keyboard on page 76).
d. Display assembly (see Display assembly on page 81).
e. Top cover (see Top cover on page 91).
f. USB board (see USB board on page 98).
g. System board (see System board on page 101).
h. Fan/heat sink assembly (see Fan/heat sink assembly on page 105).
1. Turn the processor locking screw one-half turn counterclockwise until you hear a click.(1)
2. Lift the processor (2) straight up and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
108 Chapter 4 Removal and replacement procedures
5 Setup Utility
WARNING! Only authorized technicians trained by HP must repair this equipment. All troubleshooting
and repair procedures are detailed to allow repair at only the subassembly or module level. Because of
the complexity of the individual boards and subassemblies, do not attempt to make repairs at the
component level or modify any printed wiring board. Improper repairs can create a safety hazard. Any
indication of component replacement or printed wiring board modification may void any warranty or
exchange allowances.
Starting the Setup Utility
The Setup Utility is a ROM-based information and customization utility that can be used even when your
Windows operating system is not working.
NOTE: The fingerprint reader (select models only) cannot be used to access the Setup Utility.
The utility reports information about the computer and provides settings for startup, security, and
other preferences.
To start the Setup Utility:
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press f10.
or
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press esc.
2. When the Startup Menu is displayed, press f10.
Starting the Setup Utility 109
Using the Setup Utility
Changing the language of the Setup Utility
The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the
Startup Menu is displayed, press f10.
2. Use the arrow keys to select System Configuration > Language, and then press enter.
3. Use the arrow keys to select a language, and then press enter.
4. When a confirmation prompt with your language selected is displayed, press enter.
5. To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
Your change goes into effect immediately.
Navigating and selecting in the Setup Utility
Because the Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.
●To choose a menu or a menu item, use the arrow keys.
●To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or f5 or f6.
●To select an item, press enter.
●To close a text box or return to the menu display, press esc.
●To display additional navigation and selection information while the Setup Utility is open, press
f1.
110 Chapter 5 Setup Utility
Displaying system information
The following procedure explains how to display system information in the Setup Utility. If the Setup
Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2.
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the
Startup Menu is displayed, press f10.
2. Select the Main menu. System information such as the system time and date, and identification
information about the computer is displayed.
3. To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter.
Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for
Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the
Startup Menu is displayed, press f10.
2. Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
3. When the Setup Confirmation is displayed, press enter.
4. To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
The Setup Utility default settings go into effect when the computer restarts.
NOTE: Your password, security, and language settings are not changed when you restore the factory
default settings.
Exiting the Setup Utility
You can exit the Setup Utility with or without saving changes.
●To exit the Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Saving Changes, and then press enter.
●To exit the Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Discarding Changes, and then press enter.
Using the Setup Utility 111
After either choice, the computer restarts in Windows.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
NOTE: Some of the Setup Utility menu items listed in this chapter may not be supported by
your computer.
Main menu
Select To do this
System information ●View and change the system time and date.
●View identification information about the computer.
●View specification information about the processor, memory size, system BIOS,
and keyboard controller version (select models only).
Security menu
Select To do this
Administrator password Enter, change, or delete an administrator password.
Power-On Password Enter, change, or delete a power-on password.
System Configuration menu
Select To do this
Language Support Change the Setup Utility language.
Button Sound (select models only) Enable/disable the capacitive button tapping sound.
Virtualization Technology (select
models only)
Enable/disable the processor Virtualization Technology.
Processor C6 State (select
models only)
Enable/disable the processor C6 sleep state.
LAN Power Saving (select
models only)
Enable/disable LAN Power Saving. When enabled, saves power when the computer
is in DC mode.
Card Reader/1394 Power Saving (select
models only)
Enable/disable Card Reader/1394 Power Saving.
112 Chapter 5 Setup Utility
Select To do this
Fan Always On Enable/disable Fan Always On. When enabled, the computer fan will always be on.
Boot Options Set the following boot options:
●f9 and f10 Delay (sec.)―Set the delay for the f9 and f10 functions of the Setup
Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
●CD-ROM boot―Enable/disable boot from CD-ROM.
●Floppy boot―Enable/disable boot from diskette.
●Internal Network Adapter boot―Enable/disable boot from Internal
Network Adapter.
●Boot Order―Set the boot order for:
◦USB Floppy
◦Internal CD/DVD ROM Drive
◦USB CD/DVD ROM drive
◦Hard drive
◦USB Diskette on Key
◦USB Hard drive
◦Network adapter
Diagnostics menu
Select To do this
Hard Disk Self Test Run a comprehensive self-test on the hard drive.
Secondary Hard Disk Self Test (select
models only)
Run a comprehensive self-test on a secondary hard drive.
Memory Test Run a diagnostic test on the system memory.
Setup Utility menus 113
6 Specifications
Computer specifications
Metric U.S.
Dimensions
Width 37.85 cm 14.9 in
Depth 25.8 cm 10.12 in
Height (front to back) 3.4 to 4.2 cm 1.34 to 1.65 in
Weight (with optical drive, hard drive,
and battery)
3.14 kg 6.93 lbs
Camera adds: 0.009 kg 0.02 lbs
Input power
Operating voltage 18.5 V dc @ 3.5 A - 65 W
Operating current 3.5 A or 4.74 A
Temperature
Operating (not writing to optical disc) 0°C to 35°C 32°F to 95°F
Operating (writing to optical disc) 5°C to 35°C 41°F to 95°F
Nonoperating -20°C to 60°C -4°F to 140°F
Relative humidity
Operating 10% to 90%
Nonoperating 5% to 95%
Maximum altitude (unpressurized)
Operating -15 m to 3,048 m -50 ft to 10,000 ft
Nonoperating -15 m to 12,192 m -50 ft to 40,000 ft
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this
range of temperatures.
114 Chapter 6 Specifications
15.6-inch, WXGA BrightView display specifications
Metric U.S.
Dimensions
Height 21.0 cm 8.27 in
Width 35.9 cm 14.1 in
Diagonal 39.5 cm 15.6 in
Number of colors Up to 262,000
Contrast ratio 500:1 (typical)
Brightness 220 nits (typical)
Pixel resolution
Pitch 0.255 × 0.255 mm
Format 1366 × 768
Configuration RGB vertical stripe
Backlight Edge lit
Character display 80 × 25
Total power consumption 6.5 W
Viewing angle ±45° horizontal, ±15° upper vertical, ±35° lower vertical (typical)
15.6-inch, WXGA BrightView display specifications 115
16.0-inch WXGA BrightView display specifications
Metric U.S.
Dimensions
Height 21.4 cm 8.4 in
Width 36.5 cm 14.4 in
Diagonal 40.6 cm 16 in
Number of colors Up to 262,000
Contrast ratio 600:1 (typical)
Brightness 200 nits (typical)
Pitch resolution
Pitch 0.259 × 0.259 mm
Format 1366 × 768
Configuration RGB vertical stripe
Backlight Edge lit
Character display 80 × 25
Total power consumption 4.5 W
Viewing angle ±45° horizontal, ±20° upper vertical, ±45° lower vertical (typical)
116 Chapter 6 Specifications
15.6-inch WXGA AntiGlare display specifications
Metric U.S.
Dimensions
Height 21.0 cm 8.27 in
Width 35.9 cm 14.1 in
Diagonal 39.5 cm 15.6 in
Number of colors Up to 262,000
Contrast ratio 500:1 (typical)
Brightness 220 nits (typical)
Pixel resolution
Pitch 0.255 × 0.255 mm
Format 1366 × 768
Configuration RGB vertical stripe
Backlight Edge lit
Character display 80 × 25
Total power consumption 6.5 W
Viewing angle ±45° horizontal, ±15° upper vertical, ±35° lower vertical (typical)
15.6-inch WXGA AntiGlare display specifications 117
16.0-inch WXGA AntiGlare display specifications
Metric U.S.
Dimensions
Height 21.4 cm 8.4 in
Width 36.5 cm 14.4 in
Diagonal 40.6 cm 16 in
Number of colors Up to 262,000
Contrast ratio 600:1 (typical)
Brightness 200 nits (typical)
Pitch resolution
Pitch 0.259 × 0.259 mm
Format 1366 × 768
Configuration RGB vertical stripe
Backlight Edge lit
Character display 80 × 25
Total power consumption 4.5 W
Viewing angle ±45° horizontal, ±20° upper vertical, ±45° lower vertical (typical)
118 Chapter 6 Specifications
Hard drive specifications
500-GB* 400-GB* 320-GB* 250-GB* 160-GB*
Dimensions
Height 9.5 mm 9.5 mm 9.5 mm9.5 mm 9.5 mm
Width 70 mm 70 mm 70 mm 70 mm 70 mm
Weight 101 g 101 g 101 g 101 g 101 g
Interface type ATA-7 ATA-7 ATA-7ATA-7 ATA-7
Transfer rate
Synchronous (maximum) 100 MB/sec 100 MB/sec 100 MB/sec 100 MB/sec 100 MB/sec
Security ATA security ATA security ATA security ATA security ATA security
Seek times (typical read, including setting)
Single track 3 ms 3 ms 3 ms3 ms 3 ms
Average 13 ms 13 ms 13 ms 13 ms 13 ms
Maximum 24 ms 24 ms 24 ms 24 ms 24 ms
Logical blocks 976,773,168 781,422,768 625,141,400 488,397,168 312,581,808
Disc rotational speed 5400-rpm 5400-rpm 7200-rpm and
5400-rpm
7200-rpm and
5400-rpm
5400-rpm
Operating temperature 5°C to 55°C (41°F to 131°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive
specifications may differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact technical support for details.
Hard drive specifications 119
Blu-ray ROM DVD±R/RW SuperMulti Double-Layer Drive
specifications
Applicable disc Read: Write:
BD-ROM, BD-R, BD-RE, CD-DA, CD+
(E)G, CD-MIDI, CDTEXT, CD-ROM,
CD-ROM XA, MIXED MODE CD, CD-I,
CD-I Bridge (Photo-CD, Video CD),
Multisession CD (Photo-CD, CD-
EXTRA, Portfolio, CD-R, CD-RW), CD-
R, CD-RW, DVDROM (DVD-5, DVD-9,
DVD-10, DVD-18), DVD-R, DVD-RW,
DVD+R, DVD+RW, DVD-RAM, HD-
ROM (Single Layer), HD-ROM (Dual
Layer), HD DVD-R, HD DVD-R for
Dual Layer, HD DVD-RW
CD-R and CD-RW DVD+R, DVD+R(9),
DVD+RW, DVD-R, DVD-R(9),DVD-RW,
DVD-RAM
Access time CD DVD HD
Random <170 ms <230 ms<170 ms
Cache buffer 8 MB
Data transfer rate
24X CD-ROM 3,600 KB/sec
8X DVD 10,800 KB/sec
24X CD-R 3,600 KB/sec
16X CD-RW 2,400 KB/sec
8X DVD+R 10,800 KB/sec
4X DVD+RW 5,400 KB/sec
8X DVD-R 10,800 KB/sec
4X DVD-RW 5,400 KB/sec
2.4X DVD+R(9) 2,700 KB/sec
5X DVD-RAM 6,750 KB/sec
1X BD-ROM 4,500 KB/sec
1X BD-R read 4,500 KB/sec
1X BD-RE read 4,500 KB/sec
Transfer mode Multiword DMA Mode
120 Chapter 6 Specifications
DVD±RW and CD-RW SuperMulti Double-Layer Combo
Drive specifications
Applicable disc Read:
BD-ROM, BD-R, BD-RE, CD-DA, CD+(E)G, CD-
MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED
MODE CD, CD-I, CD-I Bridge (Photo-CD, Video
CD), Multisession CD (Photo-CD, CD-EXTRA,
Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVD-
ROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-
R, DVD-RW, DVD+R, DVD+RW, DVD-RAM
Write:
CD-R and CD-RW
DVD+R, DVD+RW, DVD-R, DVD-
RW, DVD-RAM
Access time CD DVD
Random < 175 ms < 230 ms
Cache buffer 2 MB
Data transfer rate
24X CD-ROM 3,600 KB/sec
8X DVD-ROM 10,800 KB/sec
24X CD-R 3,600 KB/sec
16X CD-RW 2,400 KB/sec
8X DVD+R 10,800 KB/sec
4X DVD+RW 5,400 KB/sec
8X DVD-R 10,800 KB/sec
4X DVD-RW 5,400 KB/sec
2.4X DVD+R(9) 2,700 KB/sec
5X DVD-RAM 6,750 KB/sec
Transfer mode Multiword DMA Mode
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive specifications 121
System DMA specifications
Hardware DMA System function
DMA0 Not applicable
DMA1* Not applicable
DMA2* Not applicable
DMA3 Not applicable
DMA4 Direct memory access controller
DMA5* Available for ExpressCard
DMA6 Not assigned
DMA7 Not assigned
*ExpressCard controller can use DMA 1, 2, or 5.
122 Chapter 6 Specifications
System interrupt specifications
Hardware IRQ System function
IRQ0 System timer
IRQ1 Standard 101-/102-Key or Microsoft Natural Keyboard
IRQ2 Cascaded
IRQ3 Intel 82801 DB/DBM USB2 Enhanced Host Controller—24CD
IRQ4 COM1
IRQ5* Conexant AC—Link Audio Intel 82801 DB/DBM SMBus Controller—24C3 Data Fax
Modem with SmartCP
IRQ6 Diskette drive
IRQ7* Parallel port
IRQ8 System CMOS/real-time clock
IRQ9* Microsoft ACPI-compliant system
IRQ10* Intel USB UHCI controller—24C2
Intel 82852/82855 GM/GME Graphic Controller
Realtek RTL8139 Family PCI Fast Ethernet Controller
IRQ11 Intel USB EHCI controller—24CD
Intel USB UHCI controller—24C4
Intel USB UHCI controller—24C7
Intel Pro/Wireless 2200BG
TI OHCI 1394 host controller
TI PCI1410 CardBus controller
IRQ12 Synaptics PS/2 TouchPad
IRQ13 Numeric data processor
IRQ14 Primary IDE channel
IRQ15 Secondary IDE channel
*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none.
NOTE: ExpressCard may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the serial
port may assert IRQ3 or IRQ4.
System interrupt specifications 123
System I/O address specifications
I/O address (hex) System function (shipping configuration)
00 - 1F DMA controller Channel 0-3
CF7 PCI Bus on MS ACPI-Compliant System
20 - 21 Programmable Interrupt Controller (Master Controller)
24 - 25 Programmable Interrupt Controller (Aliases)
28 - 29 Programmable Interrupt Controller (Aliases)
2C - 2D Programmable Interrupt Controller (Aliases)
2E - 2F M/B Resource (LPC Controller)
30 - 31 Programmable Interrupt Controller (Aliases)
34 - 35 Programmable Interrupt Controller (Aliases)
38 - 39 Programmable Interrupt Controller (Aliases)
3C - 3D Programmable Interrupt Controller (Aliases)
40 - 43 System Timer
4E - 4F M/B Resource (LPC Controller)
50 - 53 System Timer
60 EC
61 LPC
62 EC
63 LPC
64 EC
65 LPC
66 EC
67 LPC
70 - 77 System CMOS/Real Time Clock
81 - 91 DMA Controller Channel 2
92 LPC
A0 - A1 Programmable Interrupt Controller (Slave Controller)
A4 - A5 Programmable Interrupt Controller (Aliases)
A8 - A9 Programmable Interrupt Controller (Aliases)
AC - AD Programmable Interrupt Controller (Aliases)
B0 - B1 Programmable Interrupt Controller (Aliases)
B2 - B3 LPC
B4 - B5 Programmable Interrupt Controller (Aliases)
B8 - B9 Programmable Interrupt Controller (Aliases)
124 Chapter 6 Specifications
I/O address (hex) System function (shipping configuration)
BC - BD Programmable Interrupt Controller (Aliases)
C0 - DF DMA Controller Channel 4 - 7
F0 Numeric Data Processor
380 - 383 ENE CIR Receiver
384 - 38E EC
3B0 - 3BB VGA
3C0 - 3DF VGA
400 - 47F LPC
4D0 - 4D1 Programmable Interrupt Controlller
500 - 53F LPC
600 - 60F LPC
610 LPC
800 - 80F LPC
810 - 817 LPC
820 - 823 LPC
D00 - FFFF PCI Bus on MS ACPI-Compliant System
164E - 164F LPC
2000 - 2FFF ICH9 Family PCI Express Root Port 6 (B0/D28/F5)
3000 - 3FFF ICH9 Family PCI Express Root Port 5 (B0/D28/F4)
4000 - 4FFF ICH9 Family PCI Express Root Port 4 (B0/D28/F3)
5000 - 50FF Realtek RTL8168C/8111C PCI-E Gigabit Ethernic NIC (B3/D0/F0)
6000 - 6FFF ICH9 Family PCI Express Root Port 1(B0/D28/F0)
7000 - 70FF VGA
7000 - 7FFF “A” diskette controller
PCI-E Root Port (B0/D1/F0)
PCI-E Root Port (B0/D1/F0)
3F8 - 3FF
8000 - 801F
8000 - 801F
SMBus Controller
SMBus Controller
Serial port (COM1/default)
8020 - 803F SATA AHCI Controller - 2929
SATA AHCI Controller - 2929
PCI configuration index register (PCIDIVO-1)
8040 - 805F USB UHCI Controller - 2939
8060 - 807F USB UHCI Controller - 2936
System I/O address specifications 125
I/O address (hex) System function (shipping configuration)
8080 - 809F USB UHCI Controller - 2935
80A0 - 80BF USB UHCI Controller - 2934
80C0 - 80DF USB UHCI Controller - 3938
80E0 - 80FF USB UHCI Controller - 2937
8100 - 8117 USB UHCI Controller - 2929
126 Chapter 6 Specifications
System memory map specifications
Size Memory address System function
640 KB 00000000-0009FFFF Base memory
128 KB 000A0000-000BFFFF Video memory
48 KB 000C0000-000CBFFF Video BIOS
160 KB 000C8000-000E7FFF Unused
64 KB 000E8000-000FFFFF System BIOS
15 MB 00100000-00FFFFFF Extended memory
58 MB 04800000-07FFFFFF Super extended memory
58 MB 04800000-07FFFFFF Unused
2 MB 08000000-080FFFFF Video memory (direct access)
4 GB 08200000-FFFEFFFF Unused
64 KB FFFF0000-FFFFFFFF System BIOS
System memory map specifications 127
7 Screw listing
This section provides specification and reference information for the screws used in the computer. All
screws listed in this section are available in the Screw Kit, spare part number 516498-001, or the Display
Screw Kit, spare part number 512362-001.
128 Chapter 7 Screw listing
Phillips PM2.0×3.0 screw
Color Quantity Length Thread Head diameter
Black 6 3.0 mm 2.0 mm 4.5 mm
Where used: One screw that secures the Bluetooth module to the top cover.
Where used: Two screws that secure the optical drive bracket to the computer.
Phillips PM2.0×3.0 screw 129
Where used: Three screws that secure the keyboard to the computer
130 Chapter 7 Screw listing
Phillips PM2.0×3.0 screw
Color Quantity Length Thread Head diameter
Silver 8 3.0 mm 2.0 mm 4.5 mm
Where used:
(1) One screw that secures the WLAN module to the system board
(2) One screw that secures the TV tuner module to the system board
Phillips PM2.0×3.0 screw 131
Where used: Four screws that secure the display hinge brackets to the display panel.
Where used: Two screws that secure the wireless antennas to the display cover
132 Chapter 7 Screw listing
Phillips PM2.0×14.0 captive screw
Color Quantity Length Thread Head diameter
Silver 3 14.0 mm 2.0 mm 4.5 mm
Where used: Three screws that secure the fan and heat sink to the system board
Phillips PM2.0×14.0 captive screw 133
Phillips PM2.5×3.0 screw
Color Quantity Length Thread Head diameter
Black 3 3.0 mm 2.5 mm 4.5 mm
Where used: Two screws that secure the modem module to the system board
Where used: One screw that secures the audio/infrared board to the system board
134 Chapter 7 Screw listing
Phillips PM2.5×4.0 screw
Color Quantity Length Thread Head diameter
Black 10 4.0 mm 2.5 mm 4.5 mm
Where used: One screw that secures the power button board to the switch cover
Where used: Three screws that secure the switch cover to the keyboard
Phillips PM2.5×4.0 screw 135
Where used: Five screws that secure the top cover to the computer
Where used: One screw that secures the top cover to the computer
136 Chapter 7 Screw listing
Phillips PM2.5×5.0 screw
Color Quantity Length Thread Head diameter
Black 22 5.0 mm 2.5 mm 4.4 mm
Where used: Four screws that secure the display inverter cover to the display bezel on computer models
equipped with AntiGlare display assemblies
Where used: Two screws that secure the display hinge bracket to the display bezel on computer models
equipped with AntiGlare display assemblies
Phillips PM2.5×5.0 screw 137
Where used: Four screws that secure the display hinges to the display bezel on computer models
equipped with AntiGlare display assemblies
Where used: Four screws that secure the display enclosure to the display bezel on computer models
equipped with AntiGlare display assemblies
Where used: Eight screws that secure the display panel to the display on computer models equipped
with BrightView display assemblies
138 Chapter 7 Screw listing
Phillips PM2.5×5.0 captive screw
Color Quantity Length Thread Head diameter
Black 3 5.0 mm 2.5 mm 4.5 mm
Where used: Three screws that secure the fan and heat sink to the system board
Phillips PM2.5×5.0 captive screw 139
Phillips PM2.5×5.5 captive screw
Color Quantity Length Thread Head diameter
Black 6 5.5 mm 2.5 mm 4.4 mm
Where used:
(1) Three captive screws that secure the memory module compartment cover to the computer (screws
are secured by C-clips)
(2) Two captive screws that secure the hard drive bay cover to the computer (screws are secured by C-
clips)
140 Chapter 7 Screw listing
Phillips PM2.5×6.5 screw
Color Quantity Length Thread Head diameter
Black 25 6.5 mm 2.5 mm 4.4 mm
Where used:
(1) One screw that secures the USB board to the system board
(2) One screw that secures the system board to the computer
Where used: Four screws that secure the keyboard to the computer
Phillips PM2.5×6.5 screw 141
Where used: One screw that secures the optical drive to the computer
Where used: Nine screws that secure the top cover to the base enclosure
Where used: Two screws that secure the display bezel to the display on computer models equipped
with BrightView display assemblies
Phillips PM2.5×6.5 screw 143
8 Backup and Recovery
Recovering system information
Recovery after a system failure is as complete as your most current backup. HP recommends that you
create recovery discs immediately after software setup. As you add new software and data files, you
should continue to back up your system on a regular basis to maintain a reasonably current backup.
Tools provided by the operating system and HP Recovery Manager software are designed to help you
with the following tasks for safeguarding your information and restoring it in case of a system failure:
●Creating a set of recovery discs (Recovery Manager software feature). Recovery discs are used
to start up (boot) your computer and restore the operating system and software programs to factory
settings in case of system failure or instability.
●Backing up your information regularly to protect your important system files.
●Creating system restore points (operating system feature). System restore points allow you to
reverse undesirable changes to your computer by restoring the computer to an earlier state.
●Recovering a program or driver (Recovery Manager software feature). This feature helps you
reinstall a program or driver without performing a full system recovery.
●Performing a full system recovery (Recovery Manager software feature). With Recovery Manager,
you can recover your full factory image if you experience system failure or instability. Recovery
Manager works from a dedicated recovery partition (select models only) on the hard drive or from
recovery discs you create.
NOTE: If your computer includes a solid-state drive (SSD), you may not have a recovery partition.
Recovery discs have been included for computers that do not have a partition. Use these discs to
recover your operating system and software. To check for the presence of a recovery partition,
select Start > Computer. If the partition is present, an HP Recovery drive is listed in the Hard Disk
Drives section of the window.
Recovering system information 145
Creating recovery discs
NOTE: HP recommends that you create recovery discs to be sure that you can restore your system
to its original factory state if you experience serious system failure or instability. Create these discs after
setting up the computer for the first time.
NOTE: Handle these discs carefully and keep them in a safe place. The software allows the creation
of only one set of recovery discs.
NOTE: If your computer does not include an internal optical drive, you can use an optional external
optical drive (purchased separately) to create recovery discs, or you can purchase the recovery discs
for your computer from the HP Web site.
Note the following guidelines before creating recovery discs:
●You will need high-quality DVD-R, double-layer DVD-R, DVD+R, double-layer DVD+R, BD-R
(writable Blu-ray), or CD-R discs. All these discs are purchased separately. DVDs and BDs have
a much higher capacity than CDs. If you use CDs, up to 20 discs may be required, whereas only
a few DVDs or BDs are required.
NOTE: Read-write discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE
(rewritable Blu-ray) discs, are not compatible with the Recovery Manager software.
●The computer must be connected to AC power during this process.
●Only one set of recovery discs can be created per computer.
●Number each disc before inserting it into the optical drive.
●If necessary, you can exit the program before you have finished creating the recovery discs. The
next time you open Recovery Manager, you will be prompted to continue the disc creation process.
To create a set of recovery discs:
1. Select Start .> All Programs > Recovery Manager > Recovery Manager
Recovery Manager opens.
2. Click Advanced Options.
NOTE: If you are operating the computer on battery power, you will be prompted to connect to
AC power before you can go to the next step.
3. Click Recovery disc creation, and then click Next.
4. Follow the on-screen instructions.
146 Chapter 8 Backup and Recovery
When to create restore points
●Before you add or extensively modify software or hardware
●Periodically, whenever the system is performing optimally
NOTE: If you revert to a restore point and then change your mind, you can reverse the restoration.
Create a system restore point
1. Select Start > Control Panel > System and Maintenance > System.
2. In the left pane, click System Protection.
3. Click the System Protection tab.
4. Under Automatic restore points, select the disk for which you want to create a restore point.
5. Click Create.
The System Protection window opens.
6. Follow the on-screen instructions.
Restore to a previous date and time
To revert to a restore point (created at a previous date and time), when the computer was functioning
optimally, follow these steps:
1. Select Start > Control Panel > System and Maintenance > System.
2. In the left pane, click System protection.
3. Click the System Protection tab.
4. Click the System Restore button, and then click Next.
The System Restore window opens.
5. Follow the on-screen instructions.
148 Chapter 8 Backup and Recovery
Performing a recovery
NOTE: You can recover only files that you have previously backed up. HP recommends that you use
Recovery Manager to create an entire drive backup as soon as you set up your computer.
Recovery Manager software allows you to repair or restore the system if you experience system failure
or instability. Recovery Manager works from recovery discs or from a dedicated recovery partition (select
models only) on the hard drive. However, if your computer includes a solid-state drive (SSD), you may
not have a recovery partition. If that is the case, recovery discs have been included with your computer.
Use these discs to recover your operating system and software.
NOTE: Windows has its own built-in repair features, such as System Restore and driver roll-back
capabilities. If you have not already tried these features, try them before using Recovery Manager.
NOTE: Recovery Manager recovers only software that was preinstalled at the factory. Software not
provided with this computer must be downloaded from the manufacturer's Web site or reinstalled from
the disc provided by the manufacturer.
Recovering from the recovery discs
To restore the system from the recovery discs:
1. Back up all personal files.
2. Insert the first recovery disc into the optical drive and restart the computer.
3. Follow the on-screen instructions.
Recovering from the dedicated recovery partition (select models only)
NOTE: If your computer includes an SSD, you may not have a recovery partition. You will not be able
to recover using this procedure. Recovery discs have been included for computers that do not have a
partition. Use these discs to recover your operating system and software.
On some models, you can perform a recovery from the partition on the hard drive from either the Start
button or f11. This restores the computer to it's factory condition.
To restore the system from the partition, follow these steps:
1. Access Recovery Manager in either of the following ways:
●Select Start .> All Programs > Recovery Manager > Recovery Manager
–or–
●Restart the computer and press f11 while the “Press <F11> for recovery” message is displayed
on the screen. Then select Recovery Manager.
Recovery Manager opens.
2. Click Advanced Options.
3. Click System recovery, and then click Next.
4. Follow the on-screen instructions.
Performing a recovery 149
9 Connector pin assignments
1394
Pin Signal
1 Power
2 Ground
3 TPB-
4 TPB+
5 TPA-
6 TPA+
Audio-in (microphone)
Pin Signal
1 Audio signal in
2 Audio signal in
3 Ground
150 Chapter 9 Connector pin assignments
Audio-out (headphone)
Pin Signal
1 Audio out, left channel
2 Audio out, right channel
3 Ground
External monitor
Pin Signal
1 Red analog
2 Green analog
3 Blue analog
4 Not connected
5 Ground
6 Ground analog
7 Ground analog
8 Ground analog
9 +5 VDC
10 Ground
11 Monitor detect
12 DDC 2B data
13 Horizontal sync
14 Vertical sync
15 DDC 2B clock
Audio-out (headphone) 151
HDMI
Pin Signal
1 Transition minimized differential signal (TMDS) data 2+
2 TMDS data 2 shield
3 TMDS data 2–
4 TMDS data 1+
5 TMDS data 1 shield
6 TMDS data 1–
7 TMDS data 0+
8 TMDS data 0 shield
9 TMDS data 0–
10 TMDS clock+
11 TMDS clock shield
12 TMDS clock-
13 Consumer electric control (CEC)
14 Not connected
15 DDC clock
16 DDC data
17 Ground
18 +5V power
19 Hot plug detect
152 Chapter 9 Connector pin assignments
Universal Serial Bus
Pin Signal
1 +5 VDC
2 Data -
3 Data +
4 Ground
154 Chapter 9 Connector pin assignments
Requirements for specific countries or regions
Country or region Accredited agency Applicable note number
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland FIMKO 1
France UTE 1
Germany 1VDE
Italy IMQ 1
Japan 3METI
The Netherlands KEMA 1
Norway NEMKO 1
The People's Republic of China CCC 5
South Korea EK 4
Sweden SEMKO 1
Switzerland SEV 1
Taiwan BSMI 4
The United Kingdom BSI 1
The United States UL 2
1. The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole grounding
type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall
plug must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
4. The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
5. The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
156 Chapter 10 Power cord set requirements
11 Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general household
waste. Follow the local laws and regulations in your area for computer battery disposal.
Display
WARNING! The backlight contains mercury. Caution must be exercised when removing and handling
the backlight to avoid damaging this component and causing exposure to the mercury.
CAUTION: The procedures in this chapter can result in damage to display components. The only
components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight.
When you remove these components, handle them carefully.
NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly
that might require special handling at end-of-life. Disposal of mercury may be regulated because of
environmental considerations. For disposal or recycling information, contact your local authorities, or
see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must be
disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this chapter are general disassembly instructions. Specific details,
such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one
computer model to another.
Battery 157
4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2).
5. Remove all screws (1) that secure the display panel assembly to the display enclosure.
6. Remove the display panel assembly (2) from the display enclosure.
7. Turn the display panel assembly upside down.
8. Remove all screws that secure the display panel frame to the display panel.
9. Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the display
panel frame.
Display 159
10. Remove the display panel frame (2) from the display panel.
11. Remove the screws (1) that secure the backlight cover to the display panel.
12. Lift the top edge of the backlight cover (2) and swing it outward.
13. Remove the backlight cover.
14. Turn the display panel right-side up.
160 Chapter 11 Recycling
15. Remove the backlight cables (1) from the clip (2) in the display panel.
16. Turn the display panel upside down.
17. Remove the backlight frame from the display panel.
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
Display 161
18. Remove the backlight from the backlight frame.
19. Disconnect the display cable (1) from the LCD panel.
20. Remove the screws (2) that secure the LCD panel to the display rear panel.
21. Release the LCD panel (3) from the display rear panel.
22. Release the tape (4) that secures the LCD panel to the display rear panel.
23. Remove the LCD panel.
24. Recycle the LCD panel and backlight.
162 Chapter 11 Recycling
I
I/O address specifications 124
IEEE 1394 port, identifying 16
infrared lens, identifying 14
integrated webcam,
identifying 18
internal microphone,
identifying 18
interrupt specifications 123
J
jacks
audio-in (microphone) 14
audio-out (headphone) 14
RJ-11 (modem) 15
RJ-45 (network) 16
TV antenna/cable 15
K
keyboard
Espresso Black spare part
numbers 48, 49
Moonlight White spare part
numbers 47, 48
product description 6
removal 76
spare part numbers 44, 76
keyboard,
Espresso Black spare part
numbers 49
Moonlight White spare part
numbers 47, 48
keyboard, Espresso Black
spare part numbers 25, 26
keyboard, Moonlight White
spare part numbers 23, 24
keyboard, Onyx
spare part numbers 23, 44,
45, 46
keypad keys, identifying 13
keys
esc 13
fn 13
function 13
keypad 13
Windows applications 13
Windows logo 13
L
LAN Power Saving 112
language support 112
latch, battery release 17
lights
battery 9, 14
caps lock 9
drive 9, 14
next/fast forward 9
num lock 10
play/pause 9
power 9, 14
previous/rewind 9
stop 10
TouchPad 8
volume down 9
volume mute 9
volume up 9
wireless 10
M
media activity buttons,
identifying 11
memory map specifications 127
memory module
product description 3
removal 64
spare part numbers 32, 43,
64
memory module compartment
cover
illustrated 37
removal 64
memory module compartment,
identifying 17
memory test 113
microphone
product description 5
microphone (audio-in jack)
pin assignments 150
microphone (audio-in) jack
defined 14
microphone, internal 18
model name 1
modem jack
pin assignments 153
modem module
removal 95
spare part numbers 27, 40,
95
modem module cable
illustrated 38
removal 104
modem, product description 5
monitor port, external
identifying 16
mute button, identifying 11
N
navigating in the Setup
Utility 110
network jack
identifying 16
pin assignments 153
next/fast forward button,
identifying 12
next/fast forward light,
identifying 9
num lock light, identifying 10
O
operating system, product
description 7
optical drive
identifying 15
precautions 53
product description 4
removal 62
spare part numbers 32, 62
specifications 120, 121
P
packing guidelines 55
passwords 112
performing a system
recovery 149
pin assignments
1394 150
audio-in 150
audio-out 151
external monitor 151
HDMI 152
headphone 151
microphone 150
modem 153
monitor 151
network 153
RJ-11 153
RJ-45 153
Universal Serial Bus
(USB) 154
plastic parts 52
Index 165
Plastics Kit
contents 37
spare part number 27, 37,
45
play/pause button, identifying 11
play/pause light, identifying 9
pointing device
product description 6
ports
1394 16
eSATA/USB 16
expansion 16
external monitor 16
HDMI 16
product description 6
USB 15, 16
power button board
removal 80
spare part number 23, 45,
80
power button, identifying 11
power connector cable
illustrated 38
removal 99
spare part number 31
power connector, identifying 15
power cord
set requirements 155
spare part numbers 39, 41,
42
power light, identifying 9, 14
power requirements, product
description 6
power-on password 112
previous/rewind button,
identifying 11
previous/rewind light,
identifying 9
processor
product description 1
removal 101
spare part numbers 27, 42,
43, 46, 101
Processor C4 State 112
product description
audio 5
chipset 2
display panel 3
docking support 6
Ethernet 5
external media cards 6
graphics 2
hard drives 4
keyboard 6
memory module 3
microphone 5
modem 5
operating system 7
optical drives 4
pointing device 6
ports 6
power requirements 6
processors 1
product name 1
security 7
serviceability 7
TV tuner 5
webcam 5
wireless 5
product name 1
program recovery 145
R
recovery
discs 145
from the recovery discs 149
from the recovery
partition 149
partition 145
system 145
recovery discs 149
Recovery Manager 145
recovery, system 145
remote control, spare part
numbers 39, 41
removal/replacement
preliminaries 52
procedures 57
restore points 147
RJ-11 (modem) jack
identifying 15
pin assignments 153
RJ-45 (network) jack
identifying 16
pin assignments 153
RTC battery
removal 67
spare part number 32, 40,
67
Rubber Feet Kit
spare part number 32, 46,
58
Rubber Kit, spare part number
39
S
Screw Kit
spare part numbers 40, 46
screw listing 128
scrolling zones, TouchPad 8
secondary hard drive self
test 113
security cable slot, identifying 15
security, product description 7
selecting in the Setup Utility 110
service considerations 52
service tag 20, 57
serviceability, product
description 7
Setup Utility
changing the language 110
Diagnostics menu 113
display system
information 111
exiting 111
Main menu 112
menus 112
restoring default settings 111
Security menu 112
starting 109
System Configuration
menu 112
using 110
slots
Digital Media 16
ExpressCard 16
memory module 17
security cable 15
solid-state drive (SSD) 145, 149
speaker assembly, spare part
number 27
specifications
Blu-ray ROM DVD±R/RW
SuperMulti DL Drive 120
computer 114
display 115, 116, 118
DVD±RW Combo Drive 121
hard drive 119
I/O addresses 124
166 Index
interrupts 123
memory map 127
optical drive 120, 121
system DMA 122
static-shielding materials 56
stop button, identifying 12
stop light, identifying 10
supported discs 146
switch cover
Espresso Black spare part
number 22
Espresso Black spare part
numbers 48
Moonlight White spare part
number 22
Moonlight White spare part
numbers 48
Onyx spare part numbers 22
removal 76
spare part number 45, 76
system board
removal 99
spare part numbers 27, 43,
48, 99
system DMA 122
system failure or instability 145
system information 112
system memory map 127
system recovery 145
system restore points 145
T
thermal material,
replacement 106
tools required 52
top cover
Espresso Black spare part
numbers 48
Moonlight White spare part
numbers 48
removal 91
spare part numbers 27, 45,
91
top cover,
Moonlight White spare part
numbers 48
TouchPad buttons, identifying 8
TouchPad light, identifying 8
TouchPad on/off button 8
TouchPad scroll zones,
identifying 8
TouchPad, identifying 8
transporting guidelines 55
TV antenna/cable jack,
identifying 15
TV tuner external antenna cable
spare part numbers 32, 41,
66
TV tuner module
removal 66
spare part numbers 32, 41,
66
TV tuner module cable
illustrated 38
removal 103
TV tuner, product description 5
U
Universal Serial Bus (USB) port
identifying 15, 16
pin assignments 154
USB board
removal 98
spare part number 31, 46,
98
USB cable
illustrated 38
USB ports, identifying 15, 16
using system restore points 147
V
vent, identifying 15, 17
Virtualization Technology 112
volume down light, identifying 9
volume mute button,
identifying 11
volume mute light, identifying 9
volume scroll zone, identifying 11
volume up light, identifying 9
W
webcam
identifying 18
product description 5
webcam light, identifying 18
Webcam/microphone cable, spare
part numbers 35
webcam/microphone module
illustrated 33, 35
removal 60, 61, 85
spare part numbers 33, 35,
45, 60, 85
Windows applications key,
identifying 13
Windows logo key, identifying 13
wireless antenna cable, spare part
numbers 35
wireless antennas 19
wireless light, identifying 10
wireless, product description 5
WLAN module
removal 72
spare part numbers 28, 40,
41, 42, 43, 72
WLAN module compartment,
identifying 17
workstation guidelines 55
Index 167
Termékspecifikációk
| Márka: | HP |
| Kategória: | laptop |
| Modell: | Pavilion dv6-1247et |
Szüksége van segítségre?
Ha segítségre van szüksége HP Pavilion dv6-1247et, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók laptop HP
20 Március 2025
13 Január 2025
12 Január 2025
11 Január 2025
11 Január 2025
11 Január 2025
28 December 2024
28 December 2024
28 December 2024
22 December 2024
Útmutatók laptop
- laptop Samsung
- laptop Sony
- laptop Fujitsu
- laptop Acer
- laptop LG
- laptop Oregon Scientific
- laptop Panasonic
- laptop Lenovo
- laptop Toshiba
- laptop Hyundai
- laptop Apple
- laptop Fellowes
- laptop Medion
- laptop Zebra
- laptop Xiaomi
- laptop Dell
- laptop Gigabyte
- laptop Tripp Lite
- laptop Prixton
- laptop Thomson
- laptop Huawei
- laptop Microsoft
- laptop Asus
- laptop PEAQ
- laptop Haier
- laptop Viewsonic
- laptop Denver
- laptop MSI
- laptop Honor
- laptop SPC
- laptop ADATA
- laptop Kogan
- laptop Razer
- laptop Jay-Tech
- laptop Pyle
- laptop Schneider
- laptop Micromax
- laptop NEC
- laptop Siig
- laptop GoClever
- laptop Getac
- laptop ECS
- laptop Packard Bell
- laptop TechBite
- laptop Alienware
- laptop Airis
- laptop Lexibook
- laptop Emachines
- laptop Trekstor
- laptop Hähnel
- laptop Sylvania
- laptop Coby
- laptop Evga
- laptop Ricatech
- laptop Mpman
- laptop Vizio
- laptop Targa
- laptop Ematic
- laptop Hannspree
- laptop XPG
- laptop Inovia
- laptop Odys
- laptop Ergotron
- laptop Ibm
- laptop Atdec
- laptop Compaq
- laptop Hercules
- laptop Vulcan
- laptop System76
- laptop General Dynamics Itronix
- laptop CTL
- laptop Everex
- laptop Olidata
- laptop Dynabook
- laptop Hamilton Buhl
- laptop AORUS
- laptop Humanscale
- laptop Aplic
- laptop Schenker
Legújabb útmutatók laptop
3 Április 2025
28 Március 2025
28 Március 2025
27 Március 2025
18 Március 2025
16 Január 2025
13 Január 2025
13 Január 2025
12 Január 2025
12 Január 2025