Használati útmutató Hotone Jogg

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hotone Jogg (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/6
or
ororor
CONNECTIONS
or
The contents of this manual are subject to change without notice.
CONNECTIONS
PANEL INTRODUCTION
1
2
2
4
3
5
6
7
1. IN: 1/4” Mono input connection for guitar or other instrument.
2. OUT L/R: Unbalanced 1/4” TS stereo output connections to
amplifiers or other equipment. For mono output, use only the left
unbalanced output.
3. XLR OUT: Balanced mono XLR output connections to mixer or
audio interface. The output signal is the same as OUT L.
4. LIFT/GND Switch: Turn the switch LIFT to cut off the ground
connection of the XLR connectors (Ground Lift) to avoid noise
caused by the ground loop. Turned GND, the XLR line will be ground
normally.
5. GAIN Knob: Controls the input gain amount up to 12dB.
6. OUTPUT Knob: Controls the overall output volume.
7. Footswitch: Tap to bypass the signal or for direct monitoring. The
signal won’t be affected by knobs onboard when bypassed. Jogg
features buffer bypass switching.

Termékspecifikációk

Márka: Hotone
Kategória: nincs kategorizálva
Modell: Jogg

Szüksége van segítségre?

Ha segítségre van szüksége Hotone Jogg, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Hotone

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva