Használati útmutató Horizon Fitness 7.0AT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Horizon Fitness 7.0AT (10 oldal) a Taposómalom kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/10
7.0AT- TREADMILLS 03
TM1 002C
SERVICE MANUAL
ISSUED - -07 2022 06
JOHNSON HEALTH INDUSTRY (VIETNAM)
V1
S I ERIAL NUMBER NFORMATION
Table of Contents
7.0AT-03
5
Service Manual
Product Record
ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
P M REVENTIVE AINTENANCE
Table of Contents
7.0AT-03
8
Service Manual
The running belt has been properly adjusted at the factory before it was shipped. At mes the belt can
move o-center during shipment. Before operang the treadmill, make sure the belt is centered and
remains centered to maintain smooth operaon.
If the running belt is too far to the right side: With the
treadmill running at 1 mph, turn the le adjustment bolt
counter-clockwise ¼ turn at a me (using the supplied
Allen wrench). Check the belt alignment. Allow belt to run
a full cycle to gauge if more adjustment is needed. Repeat
if necessary, unl the belt remains centered during use.
If the running belt is too far to the le side: With the
treadmill running at 1mph, turn the le adjustment bolt
clockwise ¼ turn at a me (using the supplied Allen
wrench). Check the belt alignment. Allow belt to run a full
cycle to gauge if more adjustment is needed. Repeat if
necessary, unl the belt remains centered during use.

Termékspecifikációk

Márka: Horizon Fitness
Kategória: Taposómalom
Modell: 7.0AT

Szüksége van segítségre?

Ha segítségre van szüksége Horizon Fitness 7.0AT, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Taposómalom Horizon Fitness

Útmutatók Taposómalom

Legújabb útmutatók Taposómalom