Használati útmutató Hooker 638-50003

Hooker Bureau 638-50003

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hooker 638-50003 (2 oldal) a Bureau kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
1
/2
ASSEMBLY INSTRUCTION
Item#: 638-50003 Bennett X-Base Writing Desk
** Please make sure you have all parts indicated below prior to assembly.
2
/2
Assembly steps:
1. Pull out two side drawers and place desk top upside down on a soft surface to prevent from
scratching top.
2. Insert one bolt(D) into hole of left and right X-bases(K), attach the end of stretcher(J) to bolts(D)
on X-bases(K) using curved washer(C), nut(A), tighten securely with spanner (B)(see diagram
1).
3. Attach assembled X-base(K) to the top panel using bolts (I), lock washers (G), flat washers (H),
and secure all bolts with allen wrench (E) in a clockwise direction (see Diagram 2).
4. Then secure assembled X-base with the end of side top by using allen wrench(E), bolts(F),
lock washers(G) and flat washers(H) in a clockwise direction (see Diagram 2).
5. Turn the desk upright and put drawers back.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and
water solution. Polish the finish with soft cloth and an industry recognized furniture polish.

Termékspecifikációk

Márka: Hooker
Kategória: Bureau
Modell: 638-50003

Szüksége van segítségre?

Ha segítségre van szüksége Hooker 638-50003, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Bureau Hooker

Útmutatók Bureau

Legújabb útmutatók Bureau