Használati útmutató Honeywell T4 Pro TH4110U2005

Honeywell Termosztát T4 Pro TH4110U2005

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Honeywell T4 Pro TH4110U2005 (32 oldal) a Termosztát kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/32
Package Includes:
• T4 Pro Thermostat
• UWP™ Mounting System
• Decorative Cover Plate
• Screws and Anchors
• 2 AA Batteries
• Thermostat Literature
T4 Pro
Programmable Thermostat
TH4110U2005, TH4210U2002
User Guide
For assistance with this product, please visit Honeywellhome.com/support
Customer assistance
Thermostat controls
• System status
information
Cool On/Heat On/Em
Heat On, Recovery,
Compressor Protection
• Actual time
• Schedule information
Following time based
schedule
• Mode
Select system mode
Heat/Off/Cool/Auto/
EM Heat (emergency
heat)
• Menu
Press to display options.
Start here to set a
program schedule
• Indoor temperature
setpoint
Press + or – to change
temperature setting
• Actual indoor
temperature
• Temperature/
Navigation buttons
Press to increase or
decrease temperature
setpoint and to
navigate menus and
menu options
• Fan
Select Fan mode
Auto/On
The screen will wake up by pressing any of the five buttons. If powered by the C wire, the screen stays lit for 45 seconds
after you complete changes. If powered by battery only, the screen stays lit for 8 seconds. Depending on how your
thermostat was installed, the screen light may always be on.
Read before installing
2
System operation settings
1 Press the button to cycle to the next Mode
available System mode.
2 Cycle through the modes until the required
System mode is displayed and leave it to
activate.
NOTE: Available System modes vary by model and
system settings.
System modes:
‒ Auto
‒ Heat
‒ Cool
‒ Off
‒ Em. Heat (TH4210U only)
Set the time and date
Time
1 Press . Menu, and then press to go to TIME
Press Select.
2 Press or to choose between 12 or 24 hour.
Press .Select
3 Use or to adjust the hour. Press Select.
4 Use or to adjust the minutes. Press Select
to exit Time menu.
Date
1 If previously setting time, continue to Step
2. If at the Home screen, press on your Menu
thermostat.
2 Press or to go to . Press DATE Select.
3 Use or to adjust year. Press Select.
4 Use the or to adjust month. Press Select.
5 Use the or to adjust Date. Press to Select
save and exit Date menu.
Fan operation settings
1 Press the button to cycle to the next Fan
available Fan mode.
2 Cycle through the modes until the required Fan
mode is displayed and leave it to activate.
NOTE: Available Fan modes vary with system
settings.
Fan modes:
‒ Auto: Fan runs only when the heating or cooling system is
on.
‒ On: Fan is always on.
3
Program Schedule
To adjust program schedules
You can program four time periods each day, with different settings for weekdays
and weekends. We recommend the pre-sets (shown in the table below), since they
can reduce your heating/cooling expenses.
Wake - Set to the time you wake up and the
temperature you want during the morning, until
you leave for the day.
Away - Set to the time you leave home and the
temperature you want while you are away (usually
an energy-saving level).
Home - Set to the time you return home and the
temperature you want during the evening, until
bedtime.
Sleep - Set to the time you go to bed and the
temperature you want overnight (usually an
energy-saving level).
NOTE: To temporarily or permanently override any of the above program
schedules, see page 4.
1 Press Menu on your thermostat.
2 PROG is displayed. Press Select. Then ON
is displayed. (If you do not want to use a
schedule, press or to display OFF. Press
Select.) Press Select.
3 Press or to select day or set of days to
edit. Press Select.
4 Press or to select a schedule period to
edit (Wake, Away, Home, and Sleep). Press
Select.
5 ON is displayed. Press Select to keep the
schedule period on. Or press and then Select
to turn off the schedule period.
6 Time starts blinking. Press or to adjust
the schedule period start time. Press Select.
7 Temperature starts blinking. Press or
to adjust the “Heat” setpoint temperature.
Press Select. Press or to adjust the “Cool”
temperature setpoint. Press Select.
8 Repeat steps 4 through 7 for the remaining
schedule periods.
9 Press Home when you’re finished to save and
return to the home screen.
10 Schedule can be adjusted and turned or ON
OFF by returning to and following the Menu
steps provided above.
Heat Cool
Wake
(6:00 am) 70 °78 °
Away
(8:00 am) 62 °85
°
Home
(6:00 pm) 70 °78 °
Sleep
(10:00
pm) 62 °82
°

Termékspecifikációk

Márka: Honeywell
Kategória: Termosztát
Modell: T4 Pro TH4110U2005

Szüksége van segítségre?

Ha segítségre van szüksége Honeywell T4 Pro TH4110U2005, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Termosztát Honeywell

Honeywell

Honeywell Day Night Round T8700A Útmutató

4 Október 2024
Honeywell

Honeywell Round on-off T87G1006 Útmutató

4 Október 2024
Honeywell

Honeywell CM5000 Útmutató

29 Szeptember 2024
Honeywell

Honeywell T822L1000/U Útmutató

29 Szeptember 2024
Honeywell

Honeywell TG512A1009 Útmutató

23 Szeptember 2024
Honeywell

Honeywell TH6320WF2003/U Útmutató

23 Szeptember 2024
Honeywell

Honeywell THR842D Útmutató

18 Szeptember 2024
Honeywell

Honeywell SMHOM8610KIT Útmutató

15 Szeptember 2024
Honeywell

Honeywell Focus Pro Útmutató

13 Szeptember 2024
Honeywell

Honeywell TH6220WF2006/U Útmutató

13 Szeptember 2024

Útmutatók Termosztát

Legújabb útmutatók Termosztát

Siemens

Siemens RDG100T Útmutató

16 Október 2024
Junkers

Junkers TA 21E Útmutató

14 Október 2024
Salus

Salus CT100 Útmutató

7 Október 2024
Dimplex

Dimplex 6181 Útmutató

7 Október 2024
Danfoss

Danfoss RA 2982 Útmutató

6 Október 2024
Bosch

Bosch Radiator thermostat II Útmutató

5 Október 2024
Danfoss

Danfoss RET 230L Útmutató

5 Október 2024
Theben

Theben RAM 811 Top - 811 9 901 Útmutató

5 Október 2024
Renkforce

Renkforce MH-850T Útmutató

5 Október 2024
Siemens

Siemens DESIGO RXA Útmutató

5 Október 2024