Használati útmutató Home Easy HE-401

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Home Easy HE-401 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
RE-INVENTING THE HOME
HOME
easy
V1.0
The HE-401and HE-402 Remote Control
Outdoor wall switchs are expansion
units for the HomeEasy range of
products and designed to work with all
the HomeEasy receiver sockets and
modules.
Additional HomeEasy receiver products
are required for the HE-401/HE-402 to
work.
S1: On/Dim
S1: Off
2Gang:
HomeEasy Remote
Control Outdoor Wall Switch
S1: On/Dim
S1: Off
1Gang:
WARNING: attaching the outdoor switch to a metallic surface will reduce
the operating distance.
Remove the switch unit from the protective casing, attach
the casing to the wall using the screws and wall plugs
provided.
Reinsert the switch unit into the protective casing making
sure the unit is the correct way up.
Switch Installation:
Deleting Remote Control:
To delete a remote control that has been paired with a HomeEasy Receiver
socket or module, simply press the "Learn" button. The LED will start to blink;
press the "Off" button on the remote control, the LED will blink twice to
confirm that the remote control has been removed from the receiver sockets
memory.
Remote Socket reset:
To delete all the remote control units from the memory of the Receiver Socket
or module, hold the "Learn" button for more than 6 seconds, the LED will start
to blink continuously. Press the learn button again, the LED will blink twice to
confirm the deletion of all remote controls form the receiver memory.
Dimming: (Compatible Receivers Only)
To dim a compatible receiver socket or module, switch the receiver on using
"On" button and then press "On" again. The unit will now start to dim, to select
the required level press "On" again.
Product Operation:
Pairing/Deleting with Remote Control:
Up to Six remote controls can be paired with each Receiver Socket or
Module. To pair the switch and socket together, press the "Learn" button. The
LED will start to flash, now press the selected "On" button on the remote
control, the LED will stop flashing. The units are now paired together, you can
test this by pressing the selected "On/Off" button.
Always refer to the original instruction when using with additional products
On/Dim
Off
Changing Battery:
Remove the switch unit from the protective casing, using a small screwdriver to
unclip the front cover from the wall switch unit.
Replace the battery with a new CR2032
battery (Byron SX100), making sure the
polarity is correct, then replace the front
cover.
C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR
Contact Details:
433MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
0560
Tel: 0845 2301231
Fax: 01527 550001
Web: www.chbyron.com
E-mail:
support@chbyron.com
Product Specification:
Remote Control: HE401/402
Battery: 3v Cr2032
Range: 30 Metres (Open Distance)
Frequency: 433.92MHz
Warning: Never Exceed the Product Specification
Contact: Helpline: 0845 2301 231
Product Compatability:
The HE-401/402 outdoor wall switch is compatible with all HomeEasy
products

Termékspecifikációk

Márka: Home Easy
Kategória: nincs kategorizálva
Modell: HE-401

Szüksége van segítségre?

Ha segítségre van szüksége Home Easy HE-401, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Home Easy

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025