Használati útmutató Hikvision CSR-IM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hikvision CSR-IM (18 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/18
CSR-IM
Multi-Target High- Precision Positioning
and Speed Measurement Radar
User Manual
CSR- Multi-Target Radar IM
Quick Installation and Debugging Procedure
Introduction
The installation and debugging introduction contains the following functions 1 the project installation
personnel can finish the installation of CSR-IM multi-target radar quickly and exactly according to this
introduction. 2 debugging radar by upper computer software, setting up the basic installation and ( ) and
function parameters of radar. 3 installing and adjusting the deflection angle and declination angle of ( )
radar according to the value suggested by upper computer.( )4 calibrating the installation deflection angle
of radar by the function of one key calibration of upper computer. 5 estimating whether the radar is ( )
running well and calibrated correctly through observing the simulation display of monitoring vehicle by
upper computer software. 6 In the ( ) end, assure to achieve the exact lane judgment ,vehicle snapshot and
vehicle speed information of the vehicles in the monitoring lanes, when the radar triggers the snapshot of
camera in normal scene.
Specification
AntennaPlanar-type microstrip patch array antenna
Operation frequency24.15GHz
Frequency deviation error ±45 MHz :≤
Emission power about 10 mW
Operating temperature 70:-40℃~+ ℃
Operating humidity 5%RH 95%RH : ~
Speed measurement range 2 280 km/h
Speed measurement accuracy:±2 km/h
Response time 26ms
Rated voltage 12V DC
Rated current 0.5A
Main installation and debugging procedure
1. Connection of radar and upper computer: achieve the connection of radar and upper computer
correctly, assure the communication running well. and
2. Project installation: install the radar on the portal frame correctly, with proper height, pivoting angle
and declination angle.
3. Radar debugging: set installation parameter of the radar, set function parameter of the radar and make
the calibration and installation debugging of radar.
4. Connecting radar to camera and snapshot: connect radar to camera, then snapshot after the debugging
of the radar.
Figure 1: Installation and Debugging Flow Chart
Radar Quick Installation Procedure
1 Software Installation o Upper Computer . n
1.1 Installation of .net Framework 4.0 Support Library
Radar upper computer software is the free-installation version, and the related bundled software
should be installed before the using of upper computer software. As shown in figure1.1, open document
folder Upper Computer Bundled Installation Softwareand find out document <<dotNetFramework>>,
then release it. You will see installation package<<.net Framework 4.0>>.
Figure 1.1 Installation package <<net Framework 4.0>>
Run installation document (document name dotNetFx40_Full_x86_x64.exe to install the support : )
libraryDispensing with running the other document, it will run itself automatically while the installation
of support library. Interface is as shown in below figure:

Termékspecifikációk

Márka: Hikvision
Kategória: nincs kategorizálva
Modell: CSR-IM

Szüksége van segítségre?

Ha segítségre van szüksége Hikvision CSR-IM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Hikvision

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva